1. Nhanganyaya
Thank you for choosing the Einhell TH-MS 2513 T Miter and Table Saw. This versatile power tool is designed for precise cutting of wood, plastic, and non-ferrous metals, offering both miter saw and table saw functionalities. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your saw. Please read these instructions carefully before first use and keep them for future reference.
Mufananidzo 1: Kupfuuraview of the Einhell TH-MS 2513 T Miter and Table Saw.
2. Mirayiridzo Yekuchengetedza
Gara uchicherechedza zvinotevera kuchengetedza kudzivirira kuvhunduka kwemagetsi, moto, uye kukuvara kwakanyanya:
- Verenga bhuku rekushandisa rose: Understand all instructions and warnings before operating the saw.
- Wear personal protective equipment (PPE): Always wear safety glasses, hearing protection, and a dust mask. Use gloves when handling saw blades.
- Chengetedza nzvimbo yebasa yakachena uye ine chiedza chakanaka: Nzvimbo dzakatsvikinyidzana kana dzine rima dzinokoka tsaona.
- Usashandise munzvimbo dzine mhepo dzinoputika: Usashandise maturusi emagetsi kana paine mvura, magasi, kana guruva zvinobvira moto.
- Chengetedza workpiece: Nguva dzose clamp or hold the workpiece firmly to prevent movement during cutting.
- Use correct blade: Ensure the saw blade is sharp, clean, and suitable for the material being cut. Never use damaged or dull blades.
- Chengetedza tsoka uye chiyero chakakodzera: Usanyanyisa.
- Bvisa magetsi: Always unplug the saw before making adjustments, changing accessories, or performing maintenance.
- Chengetedza varindi munzvimbo dzavo: Never operate the saw without all guards properly installed and functioning.
- Dzivisa kutanga netsaona: Ensure the switch is in the off-position before plugging in the tool.
3. Setup
3.1 Kuburitsa uye Kuongorora
Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Do not operate the saw if any parts are damaged or missing. Contact customer support immediately.
3.2 Gungano
The Einhell TH-MS 2513 T requires minimal assembly. Ensure all included components, such as the push stick and any necessary guards, are properly attached according to the diagrams in the separate assembly guide (if provided). The work table is made of lightweight and stable cast aluminum, designed for precise work.
3.3 Saw Blade Installation
- Bvisa magetsi: Ita shuwa kuti saha yakabviswa kubva pamagetsi sosi.
- Open blade guard: Carefully lift or open the blade guard to access the blade arbor.
- Install blade: Place the saw blade (Ø 250 x Ø 30 x 2.8 mm, 36 teeth) onto the arbor, ensuring the rotation direction indicated on the blade matches the arrow on the saw.
- Secure blade: Fasten the blade with the provided washer and arbor nut, tightening securely.
- Close guard: Dzorera chidziviriro chebanga panzvimbo yacho yekutanga.
Figure 2: Saw blade and protective guard in miter saw configuration.
4. Operating Instructions
4.1 General Operation
Before starting, ensure your workpiece is stable and properly supported. Always allow the blade to reach full speed before beginning a cut. Feed the material slowly and steadily. Never force the saw.
4.2 Miter Saw Function
The miter saw function allows for precise cross-cuts and miter cuts. Adjust the miter angle by loosening the locking knob, setting the desired angle (-45°/0°/+45°), and re-tightening the knob. For bevel cuts, adjust the saw head tilt. Ensure the workpiece is firmly against the fence.
- Kucheka Kugona pa90 °: 130 x 75 mm
- Kucheka Kugona pa45 °: 120 x 50 mm
- Cutting Capacity at 2 x 45° (Compound Miter): 70 x 35 mm
Figure 3: Adjusting the miter angle for precise cuts.
4.3 Table Saw Function
To use the saw as a table saw, lock the saw head in the upright position. Adjust the cutting height (0–40 mm) using the height adjustment mechanism. Use the parallel fence for rip cuts and the push stick for feeding smaller workpieces. The table surface measures 416 x 352 mm.
Figure 4: Adjusting the cutting height for table saw operation.
4.4 Kuchera huruva
The saw is equipped with a dust funnel behind the saw blade for improved sawdust collection. Connect a suitable dust extractor to the dust port to maintain a clean work environment and improve visibility during operation.
Figure 5: Dust extraction port for connecting a vacuum system.
5. Kuchengeta
Kugadziriswa nguva dzose kunovimbisa kugara kwenguva refu uye kushanda kwakachengeteka kwesaha rako.
- Kuchenesa: After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air. Do not use solvents that could damage plastic parts.
- Blade Inspection: Gara uchitarisa banga resaha kuti uone kana rakapinza, rakatsemuka, kana kuti mazino asipo. Dzorera mapanga asina kusimba kana akakuvara nekukasika.
- Guard Functionality: Ensure all guards move freely and return to their protective positions.
- Lubrication: Apply a light coat of machine oil to moving parts as recommended in the full manual (if applicable).
- Power Cord: Check the power cord for damage. Do not use the saw if the cord is frayed or cut.
6. Kugadzirisa matambudziko
Ichi chikamu chinotarisa zvinowanzoitika zvaungasangana nazvo. Nezvematambudziko asina kunyorwa pano, bata rutsigiro rwevatengi.
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Saw haina kutanga | Hapana magetsi; switch isina kunaka; kupisa kwakanyanya kushanda. | Check power connection; test switch; allow motor to cool down. |
| Huni dzakachekwa zvisina kunaka / Huni dzinopisa | Dull or dirty blade; incorrect blade for material; feeding too fast. | Replace or clean blade; use appropriate blade; reduce feed rate. |
| Kudedera kwakanyanyisa | Banga rakareruka; banga rakakuvara; kusungirirwa kusina kugadzikana. | Tighten blade nut; replace blade; ensure saw is securely mounted. |
| Kubvisa guruva hakushande | Chivharo cheguruva chavharika; muchina wekuburitsa guruva hauna simba rakakwana; pombi yabviswa. | Clear dust port; use a more powerful extractor; check hose connections. |
7. Zvinyorwa zveUnyanzvi
| Tsanangudzo | Value |
|---|---|
| Model Number | 4300345 |
| Power Input | 1800 W |
| Hapana-mutoro Speed | 4500 min-1 |
| Saw Blade Dimensions | Ø 250 x Ø 30 x 2.8 mm |
| Nhamba Yemazino | 36 |
| Miter Angle Adjustment | -45° / 0° / +45° |
| Cutting Width at 90° | 130 x 75 mm |
| Cutting Width at 45° | 120 x 50 mm |
| Cutting Width at 2 x 45° | 70 x 35 mm |
| Table Saw Surface | 416 x 352 mm |
| Table Saw Cutting Height | 0 - 40 mm |
| Voltage | 230 V |
| Item Weight | 14 kg |
| Zviyero zveChigadzirwa (L x W x H) | 54.5 x 47 x 37.5 cm |
| Yakakurudzirwa Surface | Huni, Metal, Plastiki |
8. Warranty uye Tsigiro
8.1 Warranty
This Einhell product comes with a 2-makore waranti from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in material and workmanship under normal use. It does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear.
8.2 Mutengi Tsigiro
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer support. You can find contact information on the official Einhell webwebhusaiti kana kuburikidza nemutengesi wemuno.
Websaiti: www.einhell.com
Please have your model number (4300345) and serial number (if applicable) ready when contacting support.