Ivation 12-LED Battery Operated Motion Sensing Table Lamp User Manual

Nhanganyaya

The Ivation 12-LED Battery Operated Motion Sensing Table Lamp provides versatile illumination with dual color temperatures and motion sensing capabilities. This manual will guide you through the setup, operation, and maintenance of your lamp, kuve nechokwadi chekushanda kwakakwana uye hupenyu hurefu.

Safety Information

• Always use new batteries from a reputable brand.
• Usasanganise mabhatiri ekare uye matsva.
• Usasanganise alkaline, chiyero (carbon-zinc), kana rechargeable (nickel-cadmium) mabhatiri.
• Remove batteries if the lamp hazvizoshandiswe kwenguva yakareba kudzivirira kubuda kwemvura.
• This product is not water resistant. Avoid exposure to water or high humidity.

Package Zviri mukati

• 1 x Ivation 12-LED Battery Operated Motion Sensing Table Lamp
• Note: 4 x C-size batteries are required and not included.

Product Features

• Dual Color Temperature: Features 6 cool white LEDs (Daylight) and 6 warm white LEDs (Moonlight).
• Motion and Light Sensing: Automatic mode activates in dark conditions when motion is detected.
• Portable Design: Battery operated for use in various locations.
• Hoko Yakabatanidzwa: An upper metal hook allows for hanging applications.
• Multiple Modes: Selectable settings include Off, Moonlight, Daylight, and Automatic (Motion/Light Sensing).

Setup: Kuiswa kwebhatiri

Follow these steps to install batteries into your Ivation Table Lamp:

1. Locate the battery compartment at the base of the lamp.
2. Gently twist the battery cover counter-clockwise to open and remove it.
3. Insert 4 C-size batteries into the compartment, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside.
4. Replace the battery cover by aligning it and twisting clockwise until it is securely closed.

Image: Battery compartment open, showing proper battery insertion.

Mufananidzo: Side view zve lamp, illustrating its dimensions.

Operating Instruction

The Ivation Table Lamp features a single toggle switch on the back to select between different operating modes:

Image: Detail of the mode selection switch.

• Off Mode: When the switch is in the central position, the lamp yakadzimwa.
• Moonlight Mode: Move the switch to the position marked with a crescent moon icon. This activates the 6 warm white LEDs, providing a gentle, ambient light at 30 Lumens. This mode is ideal for creating a relaxed atmosphere or as a nightlight.
• Daylight Mode: Move the switch to the position marked with a sun icon. This activates the 6 cool white LEDs, providing a brighter illumination at 45 Lumens. This mode is suitable for reading or general task lighting.
• Automatic (Motion/Light Sensing) Mode: Move the switch to the position marked with an 'A' or 'Auto' icon. In this mode, the lamp will activate its 6 daylight-temperature LEDs only when motion is sensed in dark conditions. The motion sensor has a range of 110° x 90° and detects motion up to 4 meters away. The light will remain on for approximately 60 seconds after all motion has ceased. This mode is designed for convenience in areas where light is only needed temporarily.

Image: Comparison of Cool White and Warm White light output.

Maintenance

Kuchenesa

Kuchenesa l yakoamp, gently wipe the exterior with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or immerse the lamp in water, as this can damage the electronic components and finish.

Kutsiviwa kwebhatiri

When the light output becomes dim or the lamp stops functioning, it is time to replace the batteries. Refer to the 'Setup: Battery Installation' section for instructions on how to safely replace the 4 C-size batteries. Always replace all batteries at the same time with new ones.

Kugadzirisa matambudziko

• Lamp kusabatidza:
  • Ensure the batteries are correctly installed with proper polarity.
  • Check if the batteries are new and fully charged. Replace if necessary.
  • Verify the toggle switch is in the desired operating mode (Moonlight, Daylight, or Automatic), not in the 'Off' position.
• Motion sensor not activating:
  • Iva nechokwadi chekuti lamp is in 'Automatic' mode.
  • The motion sensor only activates in dark conditions. Test in a sufficiently dark environment.
  • Check battery level; low batteries can affect sensor performance.
  • Iva nechokwadi chekuti lenzi yekunzwa yakachena uye haina dziviriro.
• Chiedza hachina kujeka kana kuti chinodzima:
  • This typically indicates low battery power. Replace all 4 C-size batteries.

Zvinotsanangurwa

Warranty uye Support

For product support, warranty inquiries, or to report any issues, please contact Ivation customer service. You can typically find contact information on the official Ivation website or through the retailer where you purchased the product. Please have your model number (IVAMSLP05) and purchase date available when contacting support.