Yakakosha Mirayiridzo Yekuchengetedza
Please read and understand all instructions before assembling and using this lamp. Chengetedza bhuku rino kuti ugozoshandisa mune ramangwana.
- Kuchengetedzwa Kwemagetsi: Ensure the power cord is not damaged. Do not operate the lamp if the cord or plug is damaged. Do not use with an extension cord unless the plug can be fully inserted.
- Kuiswa: Isa iyo lamp on a stable, flat surface to prevent tipping. Keep away from water and moisture.
- Kubata Mabhabhu: Always disconnect power before replacing the bulb. Allow the bulb to cool before touching. Use only the specified bulb type and wattage (10-watt LED).
- Indoor Use Chete: Izvi lamp is designed for indoor use in dry locations.
Package Zviri mukati
Iva nechokwadi chekuti zvikamu zvese zviripo usati watanga kusangana:
- Lamp Base (Brushed Nickel)
- Lamp Pole (Brushed Nickel)
- Lamp Shade (White Linen)
- 10-watt LED Bulb
Image: The Lorell 10-watt LED Bulb Table Lamp, featuring a brushed nickel base and pole, topped with a cylindrical white linen shade. The lamp is shown fully assembled.
Gungano Mirayiridzo
Follow these steps to assemble your Lorell Table Lamp:
- Unpack Components: Bvisa zvikamu zvese kubva mupakeji nokungwarira wozviisa panzvimbo yakachena, yakati sandara.
- Batanidza Lamp Pole to Base: Screw the threaded end of the lamp pole clockwise into the lamp base until it is securely tightened. Ensure the pole is straight and stable.
- Isa mwenje we LED: Carefully screw the provided 10-watt LED bulb into the lamp socket located at the top of the lamp pole. Do not overtighten.
- Nzvimbo Lamp Mvuri: Position the white linen lamp shade over the bulb and onto the shade holder (usually a ring or saddle above the bulb socket). Secure it in place if there is a retaining ring or finial.
- Kuongorora Kwekupedzisira: Ensure all connections are secure and the lamp is stable on its base.
Operating Instruction
To operate your Lorell Table Lamp:
- Batanidza Simba: Bata iyo lamp's power cord into a standard 120-volt AC electrical outlet.
- Batidza/Kudzima: Locate the push-button switch, typically on the lamp base or cord. Press the button once to turn the lamp on, and press it again to turn the lamp off.
Kuchengeta uye Kuchengeta
Proper care will ensure the longevity and appearance of your lamp:
- Cleaning the Base and Pole: Wipe the brushed nickel finish with a soft, dry cloth. Do not use abrasive cleaners or polishes, as they may damage the finish.
- Kuchenesa Mumvuri: Gently dust the linen shade with a soft brush or a lint roller. For minor spots, dab with a slightly damp jira uye bvumira kuti mhepo iome zvachose.
- Bulb Replacement: Nguva dzose bvisa lamp before replacing the LED bulb. Allow the bulb to cool completely. Replace with a 10-watt LED bulb (B10 shape size).
Kugadzirisa matambudziko
Kana ukasangana nematambudziko ne l yakoamp, tarisa matambudziko akajairika nemhinduro dzinotevera:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Lamp haina kubatidza |
|
|
| Bulb flickers |
|
|
| Lamp haina kugadzikana |
|
|
Zvigadzirwa Zvinotsanangurwa
| Model Name | 10-watt LED Bulb Table Lamp |
| Model Number | 99966 |
| Brand | Lorell |
| Zviyero (D x W x H) | 11.02" x 10" x 22" |
| Item Weight | 3.08 makirogiramu |
| Material | Brushed Nickel (Base/Pole), Linen (Shade) |
| Finish Type | Brushed |
| Mumvuri Ruvara | Chena |
| Chiedza Chinyorwa Type | LED |
| Wattage | 10 watts |
| Voltage | 120 Volts |
| Chinja Type | Push Bhatani |
| Simba Source | Corded Electric |
| Gungano Rinodiwa | Ehe |
| Indoor / Outdoor Kushandiswa | Indoor |
Warranty uye Support
This Lorell Table Lamp yakafukidzwa na 90-mazuva waranti kubva pazuva rekutenga, zvichivhara zvikanganiso muzvinhu uye mashandiro emazuva ese.
For warranty claims, technical assistance, or replacement parts, please contact Lorell customer support. Keep your purchase receipt as proof of purchase.
Tsigiro yeVatengi: Please refer to the contact information provided with your purchase or visit the official Lorell websaiti yeruzivo rwekutsigira.