Lenco L-30BK Belt Drive Turntable Instruction Manual

1. Nhanganyaya

This manual provides essential information for the safe and efficient operation of your Lenco L-30BK Belt Drive Turntable. Please read these instructions thoroughly before using the device and retain them for future reference. The Lenco L-30BK is designed for playing vinyl records at 33 and 45 RPM, featuring a built-in preamplifier and USB connectivity for digitizing your vinyl collection.

2. Safety Information

• Kunobva Simba: Ita shuwa kuti magetsi emagetsi awandatage matches the requirements specified on the unit. Use only the provided power adapter.
• Mvura uye Unyoro: Usaise mudziyo uyu mumvura, muhunyoro, kana mumvura inodonha/inopfachukira. Usaise zvinhu zvakazara nemvura, zvakaita semavhasi, pamudziyo wacho.
• Kufefetedza Ita shuwa kuti kune ventilation yakakwana. Usavhare kuvhurika kwemhepo.
• Kupisa: Chengeta mudziyo uyu kure nezvinhu zvinopisa zvakaita sema radiator, ma heat registers, mastove, kana zvimwe zvinhu (kusanganisira amplifiers) zvinoburitsa kupisa.
• Kuchenesa: Bvisa mudziyo wacho kubva paburi remadziro usati wauchenesa. Shandisa jira rakapfava, rakaoma. Usashandise michina yekuchenesa mvura kana michina yekuchenesa ine aerosol.
• Sevhisi: Usaedze kushandira chigadzirwa ichi iwe pachako. Tumira masevhisi ese kuvashandi vanokwanisa.
• Kuiswa: Place the turntable on a stable, level surface to prevent vibrations and ensure proper playback.

3. Package Zviri mukati

Please check that all items listed below are included in the package:

• Lenco L-30BK Turntable Unit
• Dust Cover
• Ndiro
• Dzinga Bhandi
• Slipmat
• AC Simba Adapter
• USB Cable
• RCA Audio Cable
• Bhuku reMirayiridzo
• Pick-up Needle (pre-installed on cartridge)

4. Chigadzirwa Pamusoroview

Familiarize yourself with the components of your Lenco L-30BK turntable.

Mufananidzo 4.1: Mberi view of the Lenco L-30BK Turntable with the dust cover open, revealing the main components including the platter, tonearm, and control buttons.

Mufananidzo 4.2: Rear panel connections of the Lenco L-30BK, including RCA audio outputs (L/R), USB port, DC12V power input, and the main power switch.

Zvikamu Zvikuru:

• Platter: The circular platform where records are placed.
• Tonearm: Holds the cartridge and stylus, which reads the grooves of the record.
• Cartridge and Stylus: Converts physical vibrations into electrical signals. The L-30BK features a Movable Magnet Sensor (MMC) with an individually replaceable stylus.
• Speed ​​​​Sector: Switch to select between 33 and 45 RPM playback speeds.
• Auto Kuvhara-Kuvhara: Automatically stops the platter rotation at the end of a record.
• Dust Cover: Inodzivirira turntable kubva muguruva kana isiri kushandiswa.
• RCA Audio Outputs (L/R): For connecting to an external amplifier kana vatauri vanoshanda.
• USB Port: For connecting to a computer to digitize vinyl records.
• DC12V Power Input: Yekubatanidza iyo adapta yemagetsi.

5. Setup

5.1 Kusunungura uye Kuisa

1. Bvisa turntable nokungwarira kubva mupakeji yayo.
2. Place the unit on a stable, level surface, away from direct sunlight, heat sources, and excessive dust or vibrations.
3. Install the dust cover by aligning its hinges with the slots on the back of the turntable.

Mufananidzo 5.1: The Lenco L-30BK Turntable with its protective dust cover closed, ready for placement.

5.2 Kuisa Plate neBhandi

1. Place the platter onto the turntable spindle.
2. Locate the drive belt, typically found underneath the platter or separately packaged.
3. Carefully stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
4. Isa slipmat pamusoro pendiro.

5.3 Audio Connection

The L-30BK has a built-in preamplifier, allowing direct connection to most audio systems.

• Connect the RCA audio cable (red for right channel, white for left channel) from the AUDIO OUT jacks on the rear of the turntable to the LINE IN or AUX IN jacks on your amplifier kana vatauri vanoshanda.

5.4 Simba Connection

• Connect the DC12V power adapter to the DC12V POWER input on the rear of the turntable.
• Batanidza iyo adapta yemagetsi mune yakakodzera madziro yekubuda.

5.5 USB Connection (for Digitization)

• To digitize your vinyl records, connect the USB cable from the USB port on the rear of the turntable to an available USB port on your computer (PC or Mac).

6. Operating Instructions

6.1 Kubatidza/Kudzima

• Flip the ON/OFF switch on the rear panel to the 'ON' position to power on the turntable.
• Flip the switch to 'OFF' when not in use.

6.2 Kutamba Rekodhi

1. Isa rekodhi mundiro, uchiita kuti ive pakati.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. For 45 RPM singles, place the included adapter on the spindle if needed.
3. Simudza ruoko rwetoni uchishandisa chibatiso chekubata.
4. Isa ruoko rwetoni nemaoko pamusoro penzvimbo yekutanga yaunoda yerekodhi.
5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record, and playback will begin.
6. At the end of the record, the auto shut-off function will stop the platter rotation. Lift the tonearm and return it to its rest.

Mufananidzo 6.1: Proper technique for lowering the tonearm onto a record for playback.

Mufananidzo 6.2: Detailed view of the Movable Magnet Sensor (MMC) cartridge and stylus assembly.

6.3 Digitizing Records via USB

The L-30BK allows you to convert your vinyl records into digital audio filekushandisa komputa.

1. Batanidza turntable pakombuta yako uchishandisa tambo yeUSB yawakapihwa.
2. Download and install audio recording software such as Audacity (available online for free) on your computer.
3. Open the recording software and select the USB Audio Device as the input source.
4. Start recording in the software, then begin playing your record on the turntable as described in section 6.2.
5. Once the record finishes, stop the recording in the software and save your digitized audio file.

7. Kuchengeta

7.1 Kuchenesa Turntable

• Gara uchibvisa turntable kubva pamagetsi usati waichenesa.
• Use a soft, dry, lint-free cloth to wipe the cabinet and dust cover.
• Usashandise abrasive cleaners, wax, kana zvinonyungudutsa sezvo zvinogona kukanganisa kupera.

7.2 Stylus Care and Replacement

• The stylus is a delicate component. Avoid touching it with your fingers.
• Clean the stylus regularly using a soft brush, gently brushing from back to front.
• The stylus should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality.
• To replace the stylus, carefully pull the old stylus assembly forward and down from the cartridge. Insert the new stylus assembly by pushing it upwards and backwards into the cartridge until it clicks into place.

8. Kugadzirisa matambudziko

If you encounter problems with your turntable, refer to the following common issues and solutions:

9. Zvinotsanangurwa

10. Warranty uye Tsigiro

Lenco products are manufactured to high quality standards. In the event of a defect, your product is covered by the terms of the warranty in your country of purchase. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lenco website. For technical support or service inquiries, please contact Lenco customer service through their official channels.