Sonero AVT115 4K HDMI Audio Extractor User Manual

1. Nhanganyaya

The Sonero AVT115 is a 4K HDMI Audio Extractor designed to separate audio signals from an HDMI source. It supports resolutions up to 4K/UltraHD/2160p at 60Hz. This device allows you to route AV signals from a source device, such as a Blu-ray player, to a monitor or TV, while simultaneously extracting the audio signal for connection to an amplifier or AV receiver via optical S/PDIF (Toslink) or to headphones/other audio devices via a 3.5mm jack. This enables simultaneous use of HD video and high-quality audio.

The extractor supports 5.1 surround sound audio extraction from the source signal, transmitting it to an amplifier or AV receiver with full support for Dolby 5.1 and DTS 5.1 for home theater systems. The additional 3.5mm jack output extracts and converts the audio signal to stereo left/right for headphones or other stereo audio devices.

2. Package Zviri mukati

• 1x Sonero AVT115 4K HDMI Audio Extractor
• 1x Chinyorwa cheMushandisi
• 1x MicroUSB to USB Power Cable

3. Setup uye Connections

Follow these steps to connect your Sonero AVT115 HDMI Audio Extractor:

1. Batanidza HDMI Source: Batanidza mudziyo wako weHDMI (semuenzaniso, Blu-ray player, game console) kune HDMI CHIRIMBISO port on the audio extractor. The extractor features a 10 cm pigtail HDMI cable for easy connection.
2. Batanidza HDMI Display: Connect your HDMI display (e.g., TV, monitor) to the HDMI CHITSAUKO chiteshi pane chinotora.
3. Connect Audio Output (Optical): For 5.1 surround sound, connect an optical S/PDIF Toslink cable from the TOSLINK OUTPUT port on the extractor to the Toslink input on your amplifier or AV receiver. This provides high-quality multichannel audio.
4. Connect Audio Output (3.5mm Jack): For stereo audio, connect headphones or another suitable audio device to the 3.5mm OUTPUT jack on the extractor.
5. Power Connection: Connect the Micro USB power cable to the MICRO-USB INPUT port on the extractor and then to a 5V/1A USB power source (e.g., a USB port on your TV or a USB power adapter).

Mufananidzo 1: The Sonero AVT115 HDMI Audio Extractor, showing its compact design and integrated pigtail HDMI input cable.

Mufananidzo 2: The Sonero AVT115 connected between an Apple TV (source) and a television (display), with an optical audio cable connected for external audio output.

4. Zvimiro

• Vhidhiyo Resolution: Supports HDMI resolutions up to 4K/UltraHD/2160p at 60Hz.
• Bandwidth: 600 MHz / 6 Gbps per channel (18 Gbps total bandwidth across all channels).
• Kudzika Kwemavara: Supports 12-bit 4K (60Hz), 12-bit 1080p (60 Hz), or 12-bit 720p/1080i (60Hz) video resolutions.
• 3D Tsigiro: Compatible with 3D formats up to 600 MHz.
• HDCP Kutevedzera: Compatible with HDCP 1.4 and 2.2 specifications.
• Rutsigiro rwekuteerera:
  • Supports uncompressed audio formats like LPCM.
  • Supports compressed audio formats such as DTS and Dolby Digital.
  • Dual audio decoupling: Digital multichannel sound for 5.1/7.1 surround sound via optical S/PDIF (Toslink) and stereo output via a 3.5mm jack.
• Simba: 5V power supply via Micro USB input.
• CEC Tsigiro: Ehe.
• EDID Tsigiro: Ehe.

5. Zvinotsanangurwa

6. Kugadzirisa matambudziko

If you encounter issues with your Sonero AVT115, consider the following:

• Hapana Vhidhiyo/Odhiyo Inobuda:
  • Ensure all HDMI and audio cables are securely connected.
  • Verify the power cable is connected and the device is receiving power.
  • Check the input source selection on your TV/monitor and amplifier/AV inogamuchira.
  • Edza neakasiyana HDMI tambo kana sosi midziyo kuti ubvise tambo kana kunobva nyaya.
• Intermittent Picture/Signal Loss (especially with 4K/HDR):
  • Ensure you are using high-quality HDMI cables rated for 4K/HDR.
  • Some devices or displays may have specific EDID requirements. The AVT115 supports EDID. If experiencing issues, try the EDID backup and recovery procedure (see below).
• EDID Backup and Recovery (Advanced):

  This procedure can help resolve compatibility issues with certain displays or sources. Note that the instructions provided here are based on similar devices and may vary slightly. If issues persist, consult Sonero support.

  1. Enter Backup Mode: Connect the extractor's pigtail HDMI (male port) to a PC. Connect the extractor's HDMI output (female port) to your monitor/TV. Unplug and re-plug the HDMI output cable once. The extractor should enter Backup Mode, and its LED will start to flash.
  2. Copy Monitor EDID: While in Backup Mode (LED flashing), ensure the monitor/TV is connected to the extractor's HDMI female port. The extractor will then copy the EDID from the connected monitor/TV.
  3. Recover Factory EDID: While in Backup Mode (LED flashing), keep the extractor's HDMI female port empty for 10 seconds. The EDID in the extractor will then revert to its factory settings.
• No 5.1 Surround Sound:
  • Ensure your source device is outputting a 5.1 audio signal.
  • Simbisa yako amplifier/AV receiver is correctly configured to receive 5.1 audio via the optical input.
  • Check the optical cable for damage or improper connection.

7. Safety Information

• Usaise mudziyo pahunyoro, tembiricha yakanyanya, kana zuva rakananga.
• Usaedze kuparadzanisa kana kugadzirisa mudziyo. Izvi zvinobvisa waranti uye zvinogona kukonzera kukuvara kana kukuvara.
• Use only the provided power cable or a compatible 5V/1A USB power source.
• Chengetedza mudziyo kure nevana.
• Iva nechokwadi chekuti mhepo inofefetera zvakanaka pakushandisa mudziyo panguva yekushanda.

8. Warranty uye Tsigiro

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Sonero website. Chengetedza humbowo hwako hwekutenga kune warranty claim.