MOOER Micro Preamp 18 Custom 100 (MMPA18) Instruction Manual

1. Chigadzirwa Pamusoroview

The MOOER Micro Preamp 18 Custom 100 (MMPA18) is a compact digital preamp pedal designed to accurately recreate the sound, dynamics, and response of popular tube amplifiers. Utilizing advanced digital technology, this pedal offers a versatile solution for guitarists seeking high-quality amplifier tones in a miniature form factor.

Key features include dual channels for diverse tonal options, an integrated speaker cabinet simulation for direct recording or PA connection, and dual operating modes to adapt to various performance and recording setups.

2. Zvimiro

• Sonically accurate digital recreations of classic tube amplifier preamp zvikamu.
• Dual channels for versatile clean and gain tones.
• Integrated speaker cabinet simulation for direct output.
• Dual operating modes to suit various user needs.
• Compact uye yakasimba dhizaini.

3. Kudzora uye Kubatana

Mufananidzo 1: Pamusoro view of the MOOER Micro Preamp 18 Custom 100, highlighting the control knobs and footswitch.

Mufananidzo 2: Rutivi view of the MOOER Micro Preamp 18 Custom 100, illustrating the 1/4" input and output jacks.

Zvinodzora:

• VOL (Vhoriyamu): Inogadzirisa huwandu hwese hwekubuda kwe preamp.
• TRE (Treble): Inodzora mhinduro yepamusoro-frequency.
• MID (Middle): Adjusts the mid-range frequency response.
• WANA: Inodzora huwandu hwekutyaira zvakanyanya/kukanganiswa.
• BASS: Inogadzirisa mhinduro ye low-frequency.
• CH/CAB (Channel/Cabinet Simulation Switch): This switch serves two functions:
  • In normal operation, it switches between the two available channels (e.g., Clean and Gain).
  • When held down, it toggles the integrated speaker cabinet simulation on or off.
• Footswitch: Engages or bypasses the pedal.

Connections:

• Input Jack (1/4" / 6.35mm): Batanidza gitare rako kana chimwe chiridzwa pano.
• Output Jack (1/4" / 6.35mm): Batanidza kune yako amplifier, audio interface, or other effects pedals.
• DC 9V Kupinza: Connect a 9V DC power adapter (center negative, 300mA minimum).
• USB 2.0 (Hardware Interface): For firmware updates or potential software integration.

4. Setup uye Operation

Kutanga Setup:

1. Iva nechokwadi chako amplifier and other audio equipment are turned off.
2. Batanidza gitare rako kune Input Jack of the MMPA18.
3. Batanidza iyo Kuburitsa Jack of the MMPA18 to the input of your amplifier kana audio interface.
4. Connect a 9V DC power adapter (center negative, 300mA minimum) to the DC 9V Inzwa Zvinotaurwa.
5. Batidza yako amplifier and other audio equipment.

Basic Operation:

• Engaging/Bypassing: Press the footswitch to turn the preamp effect on or off. The LED indicator will illuminate when the effect is active.
• Kuchinja Kwechiteshi: Muchidimbu dzvanya iyo CH/CAB switch to toggle between the two channels (e.g., a clean channel and a gain channel). The LED color or state may change to indicate the active channel.
• Kutevedzera Cabinet: Dzvanya uye ubate iyo CH/CAB switch for a few seconds to activate or deactivate the integrated speaker cabinet simulation. This is particularly useful when connecting directly to a mixing console, audio interface, or headphones, providing a more natural, mic'd cabinet sound.
• Kugadzirisa Toni: Shandisa iyo VOL, TRE, MID, GAIN, uye Bass knobs to sculpt your desired tone. Experiment with different settings for each channel.

5. Kuchengeta

• Kuchenesa: Shandisa jira rakapfava, rakaoma kuchenesa pedal. Dzivisa zvinochenesa zvinogumbura kana zvinonyungudutsa.
• Kuchengeta: Chengeta pedal munzvimbo inotonhorera, yakaoma kure nezuva rakananga uye tembiricha yakanyanya.
• Magetsi: Always use a compatible 9V DC (center negative) power supply with a minimum of 300mA. Using an incorrect power supply can damage the unit and void the warranty.
• Connections: Periodically check all cable connections for wear and tear. Ensure jacks are free of dust and debris.

6. Kugadzirisa matambudziko

• Hapana Inzwi:
  • Check all cable connections (guitar, pedal, amplifier, magetsi).
  • Ensure the power supply is correctly connected and providing power.
  • Verify the pedal is engaged (LED illuminated).
  • Check the volume settings on the pedal and your amplifier.
• Poor Sound Quality / Excessive Noise:
  • Iva nechokwadi chekuti tambo dzese dziri mumamiriro akanaka uye dzakachengetedzwa zvakanaka.
  • Try a different power supply to rule out power-related noise.
  • Adjust the GAIN knob; very high gain settings can introduce noise.
  • If using the cabinet simulation, ensure it is appropriate for your output device.
  • Ensure the pedal is not placed too close to power transformers or other sources of electromagnetic interference.
• Pedal Risingapindure:
  • Bvisa uye batanidza zvakare magetsi.
  • If issues persist, contact MOOER support.
• Kupisa zvakanyanya: While normal operation may cause some warmth, excessive heat could indicate an issue. Ensure proper ventilation and use the correct power supply. If the pedal becomes unusually hot, discontinue use and contact support.

7. Zvinotsanangurwa

8. Warranty uye Tsigiro

MOOER products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official MOOER website. In case of any issues or technical support needs, please contact MOOER customer service through their official channels.

Kuti uwane rumwe rubatsiro, unogona kushanyira MOOER Store on Amazon.