Nhanganyaya
Thank you for choosing the Mount-It! MI-391 Universal Full Motion Steel Pole Mount. This product is designed to securely attach 17 to 32 inch monitors and TVs to poles with diameters ranging from 1.1 to 2.4 inches. Its full motion capabilities allow for optimal viewing angles in various environments.
Image: The Mount-It! MI-391 pole mount demonstrating its versatility in different settings such as RVs, boats, garages, retail spaces, and outdoor areas.
Safety Information
Please read and understand all instructions before installation and use. If you have any questions, contact customer support. Improper installation or use may cause damage or serious injury.
- Weight Capacity: Usapfuure huremu hwepamusoro hwe17.6 lbs (8 kg).
- Kukura Kwesikirini: This mount is designed for screens between 17 and 32 inches.
- Pole Diameter: Ensure the pole diameter is between 1.1" and 2.4" (28mm - 60mm).
- VESA Kuenderana: Inoenderana nemapatani eVESA 75x75mm uye 100x100mm.
- Kuiswa: Two people are recommended for safe installation, especially when mounting the display.
- Maintenance: Regularly check that the mount is secure and all fasteners are tight.
Package Zviri mukati
Tarisa kuti zvese zviriko zviripo uye hazvina kukuvara usati watanga kuisa.
Image: All hardware included with the MI-391 mount, showing the pole clamp, articulating arm, and VESA plate, along with various bolts and washers for installation.
| Chikamu | Quantity |
|---|---|
| Mount Arm Assembly | 1 |
| VESA Plate | 1 |
| Hex Wrench | 1 |
| Short Bolts (for clamp) | 2 |
| Long Bolts (for clamp) | 2 |
| Thumb Screw (for VESA plate) | 1 |
| Monitor/TV Mounting Screws (various sizes) | Set |
| Washers | Set |
Product Overview
The MI-391 features a robust steel construction with an articulating arm for flexible positioning. It includes a detachable VESA plate for easy monitor attachment and removal.
Image: The main components of the MI-391 mount: the pole clamp, the articulating arm, and the VESA mounting plate.
Setup uye Installation
1. Attaching the Mount Arm to the Pole
- Identify the pole where the mount will be installed. Ensure its diameter is between 1.1" and 2.4".
- Using the provided hex wrench, loosen the two bolts on the clamp end of the mount arm until the clamp inovhura zvakafara zvekutsvedza padanda.
- For larger poles (1.81" - 2.36" diameter), remove the pre-installed short bolts and replace them with the longer bolts provided in the package.
- Slide the mount arm onto the pole at the desired height.
- Tighten the bolts back down with the hex wrench until the clamp is securely fastened to the pole. Do not overtighten.
Image: The pole clamp mechanism of the MI-391 mount, showing how it attaches to a vertical pole.
Mufananidzo: A divi view of the mount indicating compatible pole diameters (1.1" - 2.4") and the arm's extension length (12" from pole to monitor).
Video: Assembly instructions for the Mount-It! MI-391 Full Motion TV and Monitor Pole Mount.
2. Attaching the VESA Plate to the Monitor/TV
- Place your monitor or TV face down on a soft, clean surface to prevent scratches.
- Select the appropriate size mounting hardware (screws and washers) for your display's VESA mounting holes. Refer to your display's manual for VESA screw specifications.
- Align the VESA plate with the mounting holes on the back of your monitor/TV.
- Attach the VESA plate using the selected screws and tighten until secure. Do not overtighten.
Image: The detachable VESA plate being attached to a monitor, simplifying the mounting process.
3. Connecting the VESA Plate to the Mount Arm
- With the VESA plate securely attached to your monitor/TV, carefully lift the display. (Two people recommended).
- Slide the VESA plate onto the end of the mount arm as shown in the product images.
- Secure the VESA plate in place by tightening the thumb screw located at the top of the VESA plate attachment point.
Kushanda uye Kugadzirisa
The Mount-It! MI-391 offers full motion capabilities for optimal viewing.
- Tilt Adjustment: The monitor can be tilted 45 degrees up and 45 degrees down. Use the provided hex key to loosen the bolt on the tilt mechanism, adjust to the desired angle, and then tighten the bolt securely.
- Swivel Adjustment: The articulating arm allows the monitor to swivel 180 degrees left or right. Simply move the monitor to the desired swivel position.
- Kutenderera: The VESA plate allows for a full 360-degree rotation, enabling you to switch between landscape and portrait orientation.
Image: The mount's 180-degree swivel range and VESA 75x75mm and 100x100mm compatibility.
Image: The tilt mechanism allowing for a +45 to -45 degree vertical adjustment of the screen.
Image: The 360-degree rotation feature, enabling quick changes between landscape and portrait display modes.
Video: Features of the Mount-It! MI-391 Full Motion TV and Monitor Pole Mount, demonstrating its adjustability.
Maintenance
To ensure long-lasting performance and safety, follow these maintenance guidelines:
- Nguva Dzose Kuongorora: Periodically inspect all screws and connections to ensure they remain tight and secure.
- Kuchenesa: Pukuta gomo nenyoro, damp jira. Dzivisa abrasive cleaners kana zvinonyungudutsa zvinogona kukanganisa kupera.
- Lubrication: No lubrication is required for the moving parts.
Kugadzirisa matambudziko
Kana ukasangana nematambudziko, tarisa mhinduro dzinotevera dzinozivikanwa:
| Dambudziko | Solution |
|---|---|
| Monitor sags or tilts unexpectedly. | Ensure all bolts on the articulating arm and tilt mechanism are tightened securely with the hex wrench. Verify the monitor weight does not exceed 17.6 lbs. |
| Mount feels loose on the pole. | Re-tighten the two bolts on the pole clamp using the hex wrench. Confirm the pole diameter is within the specified range (1.1" - 2.4"). |
| VESA plate does not attach securely to the monitor. | Ensure you are using the correct size VESA screws for your monitor. Do not force screws. |
| Difficulty sliding VESA plate onto the arm. | Check for any obstructions. Ensure the thumb screw on the arm is fully loosened before attempting to slide the plate. |
Zvinotsanangurwa
- Muenzaniso: MI-391
- Material: Alloy Steel
- Ruvara: Nhema
- Mounting Type: Articulating, Full Motion, Rotating, Swivel, Tilt
- Zvishandiso Zvinoenderana: Monitor, Television
- Screen Saizi Kuenderana: 17 - 32 inches
- Weight Capacity: Kusvikira ku17.6 lbs (8 kg)
- VESA Kuenderana: 75x75mm, 100x100mm
- Pole Diameter Compatibility: 1.1" - 2.4" (28mm - 60mm)
- Tilt Angle: +45° kusvika -45°
- Swivel angle: 180°
- Kutenderera: 360° (Mamiriro Ekunze Kubva Pamufananidzo)
Warranty uye Support
This Mount-It! product comes with a Hupenyu hwese Warranty. Our friendly and responsive US-based customer support team is available to answer any questions you may have during normal business hours.
Kuti muwane rubatsiro, ndapota shanyirai Mount-It! Store on Amazon kana tarisa kune ruzivo rwekusangana rwunopihwa mune yako chigadzirwa kurongedza.