Nhanganyaya
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Genesis Nitro 950 Gaming Chair. Please read these instructions carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Safety Information
- Iva nechokwadi chekuti zvese zvirimo uye hazvina kukuvara usati wagadzira. Usashandise kana paine zvimwe zvikamu zvisipo kana kuti zvakatyoka.
- Follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
- Do not stand on the chair. Use it only for sitting.
- Usapfuure huremu hwepamusoro hwe150 kg (330 lbs).
- Chengeta vana nezvipfuyo kure panguva yekuunganidza. Zvidimbu zvidiki zvinogona kukonzera kudzipwa.
- Nguva nenguva tarisa mabhaudhi ese nemasikuruu kuti uve nechokwadi chekuti akasimba. Sungazve kana zvichidikanwa.
- Dzivisa kuisa chigaro pachiedza chezuva kana pakupisa kwakanyanya kudzivirira kuora kwezvinhu.
Package Zviri mukati
Before beginning assembly, verify that all components are included in your package. While specific part names may vary, a typical gaming chair package includes:
- Seat base
- Kudzoka shure
- Zvombo zvehondo (2)
- Star base
- Nzvimbo (5)
- Gas lift cylinder
- Gas lift cover
- Mechanism plate
- Lumbar cushion
- Headrest cushion
- Hardware kit (zvirukwa, washer, Allen kiyi)
Setup uye Assembly
Assembly is required for this product. Follow these general steps for proper setup. Refer to the included assembly diagram for detailed visual guidance.
- Batanidza maCasters kuStar Base: Isa chimwe nechimwe chezvigadziko zvishanu mumaburi ari kumagumo kwemaoko epasi penyeredzi kusvika zvanyatsobaya panzvimbo yacho.
- Isa Gas Lift: Place the gas lift cylinder into the central hole of the star base. Cover the gas lift with the telescopic plastic cover.
- Mount Mechanism Plate: Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism (usually indicated by a label or the lever side) faces the front of the seat. Secure with screws and washers using the provided Allen key.
- Batanidza Armrests: Secure the armrests to the sides of the seat base using the designated screws. Do not overtighten initially to allow for minor adjustments.
- Connect Seat to Backrest: Attach the backrest to the seat base using the side brackets and screws. Ensure proper alignment before tightening all screws firmly.
- Isa Chigaro Chekugara Pachinosimudza Gas Lift: Isa chigaro chakaungana pamwe nechekumashure zvakanyatsonaka pa silinda inosimudza gasi, uchiita shuwa kuti chakamira pakati uye chakasimba.
- Batanidza Cushions: Position the lumbar cushion and headrest cushion using their straps as desired for ergonomic support.
Operating Instruction
The Genesis Nitro 950 Gaming Chair offers several adjustment features to customize your seating experience.
1. Seat Height Adjustment
To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at the desired height to lock it in place.
2. Backrest Recline Adjustment
The backrest can be reclined up to 165 degrees. Locate the recline lever on the right side of the chair, near the seat. Pull the lever up to release the backrest lock, then lean back to the desired angle. Release the lever to lock the backrest in position.
3. Kugadziriswa kweArmrest
The armrests are four-way adjustable. Depending on the specific model, adjustments may include height, forward/backward, left/right swivel, and inward/outward angle. Locate the buttons or levers on the armrests to unlock and adjust them. Press or lift the control, move the armrest to the desired position, and release to lock.
4. Rocker and Locking Function (Frog Mechanism)
The chair is equipped with an advanced mechanism that allows for a rocking motion and the ability to lock the chair in any position. To enable rocking, pull out the lever located on the left side, beneath the seat. To disable rocking and lock the chair in an upright or reclined position, push the lever back in.
5. Lumbar and Headrest Cushion Positioning
The ergonomic headrest and lumbar cushion are filled with memory foam for comfort. Adjust their position by sliding them along the straps on the backrest to find optimal support for your neck and lower back.
Maintenance
Regular maintenance helps prolong the life and appearance of your Genesis Nitro 950 Gaming Chair.
- Kuchenesa: Pukuta neshambadzoamp cloth. For ecological leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid abrasive cleaners or solvents.
- Fasteners: Periodically check all screws and bolts, especially after initial assembly and every few months, to ensure they remain tight. Retighten as needed to maintain stability.
- Casters: Keep casters free of hair, dust, and debris to ensure smooth movement.
- Kusimudza Gasi: Do not attempt to disassemble or repair the gas lift cylinder. It contains pressurized gas.
Kugadzirisa matambudziko
If you encounter issues with your Genesis Nitro 950 Gaming Chair, refer to the following common problems and solutions:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Chair is unstable or wobbly | Loose screws or incorrect assembly | Check and tighten all assembly screws. Ensure the gas lift is fully seated in the star base and mechanism. |
| Seat height adjustment not working | Gas lift issue or lever mechanism obstruction | Ensure the lever is fully engaged. Check for any obstructions. If the gas lift is faulty, it may need replacement (contact support). |
| Nzvimbo yekumashure haitsiki kana kukiya | Recline lever not engaged or mechanism obstruction | Ensure the recline lever is fully pulled or pushed to engage/disengage the lock. Check for obstructions around the mechanism. |
| Kuridza mhere | Loose connections or friction between parts | Tighten all screws. Apply a small amount of silicone lubricant to moving parts or connection points if necessary. |
| MaCaster haasi kutenderera zvakanaka | Debris in casters | Bvisa bvudzi, guruva, kana marara kubva pamavhiri ecaster. |
Zvinotsanangurwa
Detailed specifications for the Genesis Nitro 950 Gaming Chair:
| Feature | Detail |
|---|---|
| Brand | Genesisi |
| Model Name | Nitro 950 |
| Model Number | NFG-1366 |
| Color | Nhema |
| Material | Ecological Leather, Memory Foam (fill), Alloy Steel (frame) |
| Zviyero zveChigadzirwa (D x W x H) | 34.25" x 27.95" x 14.37" (87 x 71 x 36.5 cm) |
| Item Weight | 28.72 Kilogram (approx. 63.3 lbs) |
| Maximum Weight Recommendation | 150 Kilogram (approx. 330 lbs) |
| Angle yekurara yemusana | Kusvikira ku165 ° |
| Armrest Type | Four-way adjustable |
| Mechanism | Advanced rocker and locking function |
| Casters | Robust large wheels with brakes, plastic-coated for scratch-resistant surfaces |
| Gungano Rinodiwa | Ehe |
| Inokurudzirwa Zvishandiso | Mutambo, Hofisi |
Warranty Information
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase.
Mutengi Support
If you require further assistance, have questions about your product, or need to report a missing or damaged part, please contact the retailer where you purchased the Genesis Nitro 950 Gaming Chair or visit the official Genesis websaiti yerutsigiro yekuonana ruzivo.
