FLEXISPOT EN2 Electric Standing Desk User Manual

1. Ruzivo Rwakakosha Chekuchengetedza

Read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Desk iri rakagadzirirwa kushandiswa mukati memba chete.
• Ensure all screws are tightened securely before use. Periodically check and re-tighten all fasteners.
• Usaremedza dhesiki zvakanyanya. Huremu hwepamusoro hunokurudzirwa i176 pounds (80 kg).
• Chengeta vana nezvipfuyo kure nedhesiki panguva yekushanda.
• Avoid placing the desk in direct sunlight or in damp nharaunda.
• Do not disassemble or modify the desk's electrical components. Contact customer support for service.

Warning: The product will arrive in two separate packages and may be shipped separately. Do not discard any packaging until assembly is complete and the desk is fully functional.

2. Package Zviri mukati

Your FLEXISPOT EN2 Electric Standing Desk is shipped in two packages. Please ensure you have received both packages before beginning assembly.

• Pasuru 1: Desktop (48" Mahogany Top)
• Pasuru 2: Desk Frame (Gray Frame), Motor, Control Panel, Power Strip, Cable Management Tray, Hardware, and User Manual.

Figure 2.1: The FlexiSpot EN2 desk components are shipped in two separate packages for safe delivery.

3. Setup uye Gungano

Assembly typically requires one person and approximately 30-60 minutes. An electric drill (not included) may be helpful for certain steps.

1. Unpack Components: Carefully remove all parts from both packages and lay them out on a soft, clean surface to prevent scratches. Verify all components are present against the packing list.
2. Unganidza Desk Furemu: Attach the lifting columns to the feet. Ensure the crossbeam is correctly oriented.
3. Attach Crossbeam: Secure the crossbeam to the lifting columns. Note that while some holes are pre-drilled for legs, the center holes for the crossbeam and cable tray may require self-tapping screws. Apply firm pressure with an electric drill for easy installation.
4. Install Motors and Control Box: Follow the manual to connect the motor cables to the control box and secure the control box to the frame.
5. Batanidza Desktop: Carefully place the desktop onto the assembled frame. Align the pre-drilled holes on the desktop with the frame and secure with screws.
6. Install Control Panel and Power Strip: Mount the 6-button digital control panel and the clamp-on power strip to the desired location on the desktop. The power strip can be clipped to the back or side.
7. Cable Management: Utilize the included cable management device to organize and secure all power and data cables underneath the desk. This helps prevent cables from snagging during height adjustments.

Figure 3.1: Assembled FLEXISPOT EN2 Electric Standing Desk.

Figure 3.2: Effective cable management keeps your workspace tidy and safe.

4. Operating Instructions

The desk features a 6-button digital controller for easy height adjustment and memory presets.

4.1 Kugadzirisa Urefu

• Dhesiki Rekusimudzira: Press and hold the 'Up' arrow button (▲) to raise the desk. The LED display will show the current height.
• Desiki rePasi: Press and hold the 'Down' arrow button (▼) to lower the desk. The LED display will show the current height.
• The motorized system adjusts smoothly from 28.1 inches to 45.7 inches. The motor operates quietly at less than 50 dB.

4.2 Zvigadziriso zveMemory

The controller features 4 programmable memory presets to quickly switch between your preferred sitting and standing heights.

1. Gadzirisa dhesiki kuti risvike pakukwirira kwaunoda uchishandisa mabhatani emuseve weKumusoro/Kudzika.
2. Press the 'M' button (Memory). The display will show 'S-'.
3. Press one of the number buttons (1, 2, 3, or 4) within 3 seconds. The display will show 'S-1', 'S-2', etc., indicating the height is saved to that preset.
4. To recall a saved height, simply press the corresponding number button (1, 2, 3, or 4). The desk will automatically move to the saved position.

4.3 Integrated Power Strip and USB Ports

The desktop is equipped with a removable power strip for convenient device charging and power access.

• The power strip includes 3 AC outlets (125V/12A) and 2 USB charging ports (5V/2A).
• It can be clipped to the back or side of your desk to suit your setup.

Figure 4.1: Digital control panel for height adjustment and memory presets.

Figure 4.2: Integrated power strip with AC outlets and USB charging ports.

4.4 Timer Function (if available on your model)

Some models may include a timer function to remind you to switch between sitting and standing positions. Refer to your specific model's manual for details on setting and using this feature.

5. Zvimiro

• Yese-Piece Desktop: The 1-inch eco-friendly desktop provides a seamless and spacious work surface, offering enhanced stability compared to multi-piece desktops.
• Durable Construction: Constructed with an industrial-grade steel frame and solid tabletop, the desk can support up to 176 pounds (80 kg). Each frame undergoes rigorous testing for performance and durability.
• Rounded Corners: The desktop features rounded corners for safety and to prevent accidental bumps or damage.
• Quiet Operation: The motor operates at less than 50 dB, ensuring a quiet work environment during height adjustments.

Figure 5.1: The whole-piece desktop offers enhanced stability and a smooth surface.

Figure 5.2: The desk operates with a quiet motor, producing less than 50 dB of noise.

Figure 5.3: The desk's robust construction supports up to 176 lbs.

6. Kuchengeta

• Kuchenesa: Pukuta desktop uye furemu nenyoro, damp jira. Dzivisa abrasive cleaners kana makemikari ane hasha anogona kukuvadza kupera.
• Kuongorora: Nguva nenguva tarisa masikuruu nemabhoti ese kuti uve nechokwadi chekuti akasimba. Simbisa zvakare kana zvichidikanwa.
• Cable Management: Ensure cables remain neatly organized and are not pinched or strained during height adjustments.

7. Kugadzirisa matambudziko

• Desk Kwete Kufamba: Check all cable connections, especially the power cord and motor cables. Ensure the power outlet is functional.
• Uneven Movement: Perform a reset procedure (refer to the full user manual for specific steps). Ensure the desk is not overloaded or obstructed.
• Error Codes: If an error code appears on the LED display, consult the comprehensive user manual for specific troubleshooting steps related to that code.

8. Zvinotsanangurwa

Figure 8.1: Key dimensions and features of the FLEXISPOT EN2 desk.

9. Warranty uye Tsigiro

FLEXISPOT provides comprehensive warranty coverage for your EN2 Electric Standing Desk:

• 5-Yemakore Warranty: Applies to frames, motors, and other mechanical devices.
• 2-Yemakore Warranty: Applies to controllers, switches, and electronics.

For customer support, troubleshooting assistance, or warranty claims, please visit the official FLEXISPOT websaiti kana kubata dhipatimendi ravo rebasa revatengi zvakananga.

10. Official Product Videos