Nhanganyaya
The Concord Heritage LED Ceiling Fan is designed to provide efficient air circulation and ambient lighting for indoor spaces such as bedrooms, living rooms, and offices. This 52-inch fan features a traditional 5-blade design, an integrated LED light kit, and convenient pull chain control. Its dual-mount system allows for both flush and downrod installation, accommodating various ceiling heights.
Key features include reversible blades for year-round comfort, a powerful motor with three speed settings, and a durable steel housing with a white finish.
Safety Information
Ndapota verenga uye unzwisise mirairo yose usati watanga kuisa. Kutadza kutevedzera mirairo iyi kunogona kukonzera kuvhunduka kwemagetsi, moto, kana kukuvara.
- Always disconnect power at the main circuit breaker before installing, cleaning, or servicing the fan.
- All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code. If you are unfamiliar with proper electrical wiring, seek the services of a qualified electrician.
- Ensure the installation site allows the fan blades to rotate without obstruction. Maintain a minimum clearance of 7 feet from the floor to the bottom of the blades.
- Chimiro chekuisa chinofanira kukwanisa kutsigira huremu hwefeni (inenge mapaundi 17.6).
- Usakotamise zvibatiso zvemapanga panguva yekuisa kana kuchenesa.
- Usaise zvinhu munzira yemashizha efeni apo feni iri kushanda.
- This fan is rated for indoor, dry locations only. Do not install in damp kana nzvimbo dzakanyorova.
Package Zviri mukati
Tarisa kuti zvese zviriko zviripo usati watanga kuisa:
- Fan Motor Housing Assembly
- 5 Fani Blades
- Blade Arms (pre-attached to blades or separate)
- Light Kit Assembly (Glass Shade, Light Fitter)
- 3 x 6.5W A15 LED Bulbs
- Kuisa Bracket
- 4.5-inch Downrod
- Canopy
- Pull Chains (for fan speed and light)
- Paketi yemidziyo (zvikushi, mawasher, nzungu dzewaya, nezvimwewo)
Setup & Kuisa
This ceiling fan features a dual-mount system, allowing for either a flush mount installation (ideal for low ceilings) or a standard downrod installation. Professional installation is recommended if you are not experienced with electrical wiring.
General Installation Matanho:
- Dzima Simba: Before starting, ensure power is disconnected at the circuit breaker to prevent electrical shock.
- Mounting Bracket Installation: Batanidza chibatiso chekuisa pabhokisi repadenga. Iva nechokwadi chekuti bhokisi repadenga rakasungirirwa zvakanaka pachivako uye rinogona kutsigira huremu hwefeni.
- Gungano: Assemble the fan blades to the motor housing. Attach the light kit assembly to the bottom of the fan motor. Install the included LED bulbs into the light kit.
- Wiring: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the full installation guide (not included here). Ensure all connections are secure using wire nuts.
- Kuisa Fan: Carefully lift the fan assembly and hang it from the mounting bracket. For downrod installation, feed the wires through the downrod and secure the downrod to the motor housing and mounting bracket. For flush mount, attach the fan directly to the mounting bracket.
- Kuiswa kweCanopy: Svetesa denga kusvika padenga worisunga pabhureki rekuisa, uchivhara kubatanidza waya.
- Macheki ekupedzisira: Double-check all connections and ensure no wires are pinched. Restore power at the circuit breaker.
Mufananidzo 1: Zvose view of the Concord Heritage LED Ceiling Fan.
Mufananidzo 2: Example of the fan installed using the flush mount option, suitable for lower ceilings.
Mufananidzo 3: Example of the fan installed using the standard downrod option, providing more clearance.
Operating Instruction
The Concord Heritage LED Ceiling Fan is operated using two pull chains located on the fan's motor housing.
- Kudzora Kumhanyisa kweFan: One pull chain controls the fan speed. Pull the chain repeatedly to cycle through the three available speeds: High, Medium, Low, and Off.
- Light Control: The second pull chain controls the integrated LED light kit. Pull the chain to turn the light On or Off.
- Reversible Blades: The fan features reversible blades, allowing you to change the direction of airflow. During warmer months, set the fan to rotate counter-clockwise to create a cooling breeze. In cooler months, set the fan to rotate clockwise at a low speed to circulate warm air trapped near the ceiling. The direction switch is typically located on the fan motor housing.
Maintenance
Kugara kugadziridza kunovimbisa hupenyu hurefu uye kuita kwakaringana kweceiling fan yako.
- Kuchenesa: To clean the fan, wipe the blades and motor housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish. Ensure power is off before cleaning.
- Light Bulb Replacement: The fan uses three 6.5W A15 LED bulbs with a medium base. To replace bulbs, ensure power is off, allow bulbs to cool, then carefully unscrew the old bulbs and screw in the new ones.
- Blade Balance: If the fan wobbles, check that all blade screws are tightened. A balancing kit (not included) can be used to correct any imbalance.
- Simbisa maFasteners: Periodically check and tighten all screws and fasteners on the fan assembly to ensure secure operation.
Kugadzirisa matambudziko
If you experience issues with your fan, consult the following table for common problems and solutions:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Fani haina kutanga | Hapana simba kune fan Loose wire connections Motokari nyaya | Tarisa wedunhu breaker uye madziro switch. Wona kuti kubatanidza kwewaya kwese kwakachengeteka (ona kuti magetsi adzimwa kutanga). Contact customer support if motor is unresponsive. |
| Fani inodedera | Loose blade screws Unbalanced blades Loose mounting bracket | Simbisa blade screws dzose. Use a blade balancing kit (sold separately) or swap blades to find balance. Ensure mounting bracket is securely fastened to the ceiling. |
| Chiedza hachishande | Bulbs are faulty or loose Loose wire connections Light kit issue | Check if bulbs are screwed in tightly; replace if necessary. Verify light kit wiring connections (ensure power is off first). Contact customer support if light kit is unresponsive. |
| Kuita ruzha | Loose screws Motor hum Blade rubbing | Tighten all screws on the fan. Some motor hum is normal; if excessive, contact support. Check for any obstructions or misaligned blades. |
Zvinotsanangurwa
| Brand | Concord |
| Model Name | Heritage |
| Chikamu Nhamba | 52HES5WH-MB-LED |
| Size | 52 inch |
| Color | Chena |
| Electric Fan Design | Ceiling Fani |
| Simba Source | Corded Electric |
| Product Dimensions | 52"D x 52"W x 18.13"H |
| Room Type | Imbhedha, Living Room |
| Special Feature | Dual Mount |
| Inokurudzirwa Zvishandiso | Kutenderera Kwemhepo |
| Light Kit Wattage | 6.5 watts (pa girobhu rimwe nerimwe) |
| Nhamba yeBlades | 5 |
| Kuyerera Kwemhepo Kugona | 4500 Cubic Feet Per Minute |
| Voltage | 120 Volts |
| Chinja Type | Dhonza Chain |
| Item Weight | 17.6 Pondo |
| Indoor / Outdoor Kushandiswa | Indoor |
| Certification | UL Yakanyorwa |
| Nhamba yeMasimba Masimba | 3 |
| Rudzi rweBulb | LED (A15, Medium Base) |
| UPC | 098197967923 |
Warranty & Support
This Concord Heritage LED Ceiling Fan is backed by a Yakaganhurirwa Hupenyu hwese Motor Warranty. This warranty covers defects in materials and workmanship of the fan motor under normal use and service.
For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the manufacturer's official website.
If you require technical assistance, have questions about installation, or need to claim warranty service, please contact Concord customer support. Contact information can typically be found on the product packaging or the manufacturer's website.