FLEXISPOT 4 Leg Standing Desk Instruction Manual

1. Safety Information

Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or product damage. Keep this manual for future reference.

• This desk requires assembly. Ensure all components are correctly installed before use.
• The maximum weight capacity for this desk is 220 pounds (100 kg). Do not exceed this limit.
• When adjusting the desk height, ensure there are no obstructions above or below the desk that could interfere with its movement.
• Chengeta vana nezvipfuyo kure nedhesiki panguva yekushanda.
• Do not attempt to manually force the desk up or down. Use only the electric control panel.
• Ensure the power cord is properly connected and routed to prevent tripping hazards or damage.
• For optimal stability, ensure the desk is placed on a level surface.

Important Note: When using the LED control panel to adjust height, the three height keys must be pressed and held continuously until the desired height is reached.

2. Package Zviri mukati

Iva nechokwadi chekuti zvese zvirimo usati watanga kugadzira. Kana paine zvimwe zvikamu zvisipo kana kuti zvakakuvara, ndapota taura nerutsigiro rwevatengi.

• Desktop (71"x32" Black Top)
• Desk Frame (Black Frame)
• 4 Makumbo
• Control Panel
• Power Adapter uye Cable
• Zvishandiso zveAssembly (screws, bolts, nezvimwewo)
• Bhuku reMirayiridzo

3. Mirayiridzo yeGungano

Assembly typically requires two people. Please follow these steps carefully. A power drill may be helpful for some steps, but is not strictly required.

1. Unpack Components: Nyatsobvisa zvikamu zvese kubva pakurongedzerwa uye wozviisa panzvimbo yakachena, yakapfava kudzivirira makwara.
2. Batanidza Makumbo paFuremu: Securely attach the four legs to the desk frame using the provided hardware. Ensure all connections are tight.
3. Install Desktop: Place the desktop upside down on a soft surface. Carefully align the assembled frame with the pre-drilled holes on the underside of the desktop. Secure the frame to the desktop using the appropriate screws.
4. Mount Control Panel: Attach the LED control panel to the underside of the desktop, typically on the front edge, using the provided screws.
5. Batanidza Cables: Connect the motor cables from the legs to the control box. Connect the control panel cable to the control box. Finally, connect the power adapter to the control box and plug it into a power outlet. Ensure all cables are neatly managed to avoid interference with desk movement.
6. Kutanga Setup: Once assembled, carefully flip the desk upright. Perform an initial height calibration by pressing and holding the 'Down' button until the desk reaches its lowest point, then release. The desk is now ready for operation.

Figure 3.1: Fully assembled FLEXISPOT 4 Leg Standing Desk.

Figure 3.2: Detailed dimensions of the desk, including height range and desktop size.

4. Operating Instructions

The FLEXISPOT 4 Leg Standing Desk features an intuitive LED control panel for easy height adjustments and memory settings.

4.1. Control Panel Pamusoroview

Figure 4.1: Digital Keypad with memory functions and up/down controls.

• Miseve Yekumusoro/Yakadzika (▲ / ▼): Press and hold to adjust the desk height upwards or downwards. The current height is displayed on the LED screen.
• Mabhatani Ekurangarira (1, 2, 3): These buttons allow you to save and recall preferred height settings.
• Memory Set Button (M): Used to program a height into a memory slot.

4.2. Kugadzirisa Urefu

To adjust the desk height, press and hold the ▲ (Up) or ▼ (Down) arrow button until the desk reaches your desired position. The desk will move smoothly between 28.7 inches and 47.2 inches.

4.3. Saving Memory Presets

You can save up to three preferred height settings for quick recall:

1. Gadzirisa dhesiki kuti rienderane nekukwirira kwaunoda uchishandisa miseve yekumusoro/kudzika.
2. Press the 'M' button. The LED display will show 'S-'.
3. Within 3 seconds, press one of the memory buttons (1, 2, or 3). The LED display will show 'S-1', 'S-2', or 'S-3' to confirm the setting has been saved.

4.4. Recalling Memory Presets

To move the desk to a saved height, press and bata the corresponding memory button (1, 2, or 3) until the desk reaches the programmed height.

4.5. Anti-Collision System

The desk is equipped with an anti-collision system to prevent damage. If the desk encounters an obstruction during movement, it will stop and reverse slightly. Remove the obstruction before resuming operation.

Figure 4.2: Anti-collision system in action, preventing damage from obstructions.

5. Kuchengeta

Regular maintenance ensures the longevity and smooth operation of your standing desk.

• Kuchenesa: Pukuta desktop uye furemu nenyoro, damp jira. Dzivisa makemikari ane hasha kana abrasive cleaners.
• Cable Management: Periodically check and organize cables to prevent tangles and ensure they do not interfere with the desk's movement.
• Fastener Check: Dzimwe nguva tarisa ese screws uye mabhaudhi kuti ave nechokwadi kuti anoramba akasimba. Simbisazve kana zvichidiwa.
• Motor Care: The electric motors are maintenance-free. Do not attempt to lubricate or disassemble them.

6. Kugadzirisa matambudziko

If you encounter issues with your desk, refer to the following common problems and solutions:

• Desk Kwete Kufamba:
  • Check if the power cord is securely plugged into both the desk and the wall outlet.
  • Iva nechokwadi chekuti tambo dzese dzemota dzakabatana zvakanaka nebhokisi rekudzora.
  • Perform a reset: Press and hold the 'Down' button until the desk reaches its lowest point and slightly retracts, then release.
• Uneven Movement or Wobbling:
  • Ensure the desk is on a level surface. Adjust the leveling feet if necessary.
  • Check that all assembly screws and bolts are tightened securely.
  • Verify that the weight on the desk does not exceed the maximum capacity of 220 lbs and is evenly distributed.
• Makodhi eError paChiratidziro:
  • If an error code appears, try performing a reset as described above.
  • If the error persists, disconnect power for 10 minutes, then reconnect and try again.
  • Bvunzai vagadziri website or contact customer support with the specific error code.
• Memory Presets Haisi Kushanda:
  • Iva nechokwadi chekuti uri kudzvanya uye kubata the memory button until the desk reaches the saved height.
  • Re-program the memory presets if they are not recalling correctly.

If these steps do not resolve the issue, please contact FLEXISPOT customer support for further assistance.

7. Zvinotsanangurwa

8. Warranty uye Tsigiro

FLEXISPOT provides comprehensive warranty coverage for your peace of mind:

• 5-Yemakore Warranty: Covers the desk frame and motor components.
• 2-Yemakore Warranty: Covers the control panel and other electronic parts.

For warranty claims, technical support, or any questions regarding your FLEXISPOT product, please visit the official FLEXISPOT website or contact their customer service department. Please have your model number (QS2B-1880-AU) and proof of purchase available when contacting support.