1. Safety Information
Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Chengetedza pasingasvikirwi nevana.
- Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
- Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
- Usasiya inflator isina kutarisirwa panguva yekushanda.
- Avoid exposing the inflator to rain or moisture.
- Do not attempt to disassemble or modify the device. Contact customer support for assistance.
- Shandisa chete tambo yekuchaja yakapihwa uye zvishongedzo.
- Chengeta chinhu chinopinza mweya munzvimbo inotonhorera, yakaoma kana chisiri kushandiswa.
2. Package Zviri mukati
Ona kuti zvinhu zvese zviripo mupasuru yako:
- 1x SYNCWIRE SW2002 Portable Tire Inflator
- 1x Air Hose
- 1x USB-C yekuchaja Cable
- 1x Yekuchengetedza Bhegi
- 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
- 4x Car Tire Valve Caps
- 1x Chinyorwa cheMushandisi (Iri gwaro)
- 1x Warranty Policy
Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.
3. Chigadzirwa Pamusoroview
3.1 Mamiriro Akakosha
- High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
- Yakakura LCD Ratidza: Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
- Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
- Auto Kuvhara-Kuvhara: Inomisa inflation otomatiki kana kumanikidzwa kwakatarwa kwasvika.
- Multiple Inflation Modes: 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
- Zvikamu zvakasiyana-siyana: Supports PSI, KPA, BAR, and KG/CM².
- Yakavakwa-mukati LED Tochi: Provides illumination for use in low-light conditions.
- Emergency Power Bank: USB output port allows charging of mobile devices.
- Compact uye Inotakurika: Yakagadzirirwa kuchengetedza nyore uye kutakura.
3.2 Dhizaini Dhizaini
Mufananidzo: Mberi view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.
- Chiratidziro cheLCD: Shows current and target pressure, battery level, and selected mode.
- Bhatani reModhi: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
- Bhatani reSimba: Inobatidza/dzima mudziyo uye inotanga/imisa kukwira kwemhepo.
- +/- Mabhatani: Adjusts preset pressure values.
- Bhotani reyuniti: Changes pressure units (PSI, KPA, BAR, KG/CM²).
- Akatungamirira Light Button: Activates/deactivates the built-in flashlight.
- Chiteshi cheHombi yeMhepo: Connects the air hose to the inflator.
- USB-C Inzwa Zvinotaurwa: For charging the inflator.
- USB-A Kubuda: For using the inflator as a power bank.
4. Setup
4.1 Kuchaja iyo Inflator
- Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
- Connect the other end of the cable to a compatible USB power adapter (not included) or a USB port.
- The battery indicator on the LCD display will flash during charging and become solid when fully charged.
- A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.
4.2 Kubatanidza Air Hose neNozzle
- Screw the air hose securely into the air hose port on the top of the inflator.
- Select the appropriate nozzle adapter for the item you wish to inflate.
- Screw the chosen nozzle adapter onto the free end of the air hose.
5. Operating Instructions
5.1 Kubatidza/Kudzima
- Dzvanya uye ubate iyo Bhatani reSimba for 3 seconds to turn the inflator on.
- The LCD display will light up, showing the current battery level and default mode.
- Kuti udzime, dzvanya wobata bhatani Bhatani reSimba for 3 seconds again, or the device will automatically shut off after a period of inactivity.
5.2 Selecting Inflation Mode and Unit
Image: The inflator's LCD screen displaying various preset inflation modes.
- Mushure mekuisa simba, tinya iyo Bhatani reModhi to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
- Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
- Press the Bhatani reyuniti to switch between pressure units: PSI, KPA, BAR, KG/CM².
5.3 Kuisa Kumanikidzwa Kunodiwa
- Once a mode is selected, the preset pressure value will flash on the LCD.
- Shandisa iyo + uye - buttons to adjust the desired target pressure.
- Refer to your vehicle's or item's manufacturer recommendations for correct pressure values.
5.4 Kutanga uye Kumisa Inflation
Image: The inflator actively inflating a car tire, demonstrating its speed.
- Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
- Press the Bhatani reSimba to start inflation. The real-time pressure will be displayed.
- Chinofuridza chinomira chega kana kumanikidzwa kwacho kwasvika.
- To manually stop inflation, press the Bhatani reSimba zvakare.
- Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.
5.5 Kushandisa mwenje we LED
- Press the LED Chiedza Bhatani kubatidza tochi.
- Press again to cycle through different light modes (e.g., steady, SOS, flashing).
- Press a third time to turn off the flashlight.
5.6 Simba Bank Basa
Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.
- Connect your device's charging cable to the USB-A output port on the inflator.
- The inflator will begin charging your device. This function is useful for emergencies.
6. Kuchengeta
6.1 Kuchenesa
- Ensure the inflator is turned off and disconnected from any power source before cleaning.
- Pukuta kunze nekanyoro, damp jira. Usashandise makemikari ane hasha kana abrasive cleaners.
- Keep the air intake and exhaust vents clear of dust and debris.
6.2 Kuchengeta
- Store the inflator and its accessories in the provided storage bag.
- Chengeta mudziyo wacho munzvimbo inotonhorera, yakaoma, kure nezuva rakananga uye tembiricha yakanyanya.
- For prolonged storage, charge the inflator every 3-6 months to maintain battery health.
7. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Inflator haibatidzi. | Bhatiri rakaderera. | Charge the inflator fully. |
| Inflator inomira nguva isati yakwana. | Preset pressure reached. | This is normal operation. Check the pressure reading. |
| Overheating. | Allow the device to cool down for 10 minutes before resuming use. | |
| Slow inflation or no air output. | Hosipaipi yemhepo kana muromo wemuromo hazvina kubatana zvakanaka. | Ita shuwa kuti zvese zvinongedzo zvakatsiga. |
| Incorrect nozzle adapter used. | Select the correct adapter for the item. | |
| Inaccurate pressure readings. | Incorrect pressure unit selected. | Press the Unit Button to select the desired unit (PSI, KPA, BAR, KG/CM²). |
| Sensor obstruction. | Ensure the air hose and valve are clear of debris. |
8. Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Model Name | SW2002 |
| Brand | SYNCWIRE |
| Maximum Pressure | 150 PSI |
| Kuyerera Kwemhepo Kugona | 18 litres paminiti |
| Simba Source | Battery Powered |
| Operation Mode | Automatic |
| Hose Length | 9.05 inches |
| Item Weight | 1.05 Pondo |
| Zviyero zveChigadzirwa (LxWxH) | 5.29" x 2.93" x 1.85" |
| Material | Durable, Reliable |
| Color | Nhema |
9. Warranty uye Tsigiro
SYNCWIRE provides a 36-mwedzi waranti for the SW2002 Portable Tire Inflator.
For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.
Please refer to the included Warranty Policy document for detailed terms and conditions.