Good Earth Lighting LED Outdoor Security Flood Light

Product Overview

The Good Earth Lighting LED Outdoor Security Flood Light is designed to provide reliable and efficient outdoor illumination with motion activation. Featuring a durable, weather-resistant design and flexible installation options, this flood light enhances security and visibility around your property.

Image: Good Earth Lighting LED Outdoor Security Flood Light, front view.

Zvinokosha:

• Weatherproof Dhizaini: IP65-rated polycarbonate construction withstands heavy rain and wind.
• Wide Light Coverage: Illuminates an area of 39.3 ft outward and 45.9 ft wide with 5000K daylight color temperature.
• Flexible Installation: Can be plugged into a 20-amp GFCI outlet or hardwired directly into a junction box.
• Adjustable Motion Sensor: Features a 180-degree detection angle, up to 70 feet sensing range, and a 1 to 10-minute adjustable timer. Preset settings include 50 feet with a 3-minute timer.
• Yakasiyana-siyana application: Suitable for various outdoor locations, including uncovered areas, with wall, eave, or junction box mounting options.

Ruzivo Rwakakosha Chekuchengetedza

• Verenga mirayiridzo yose zvakanyatsonaka usati waisa uye kushanda.
• Iva nechokwadi chekuti magetsi abviswa pa circuit breaker usati waisa kana kugadzirisa chero chinhu.
• This product is designed for outdoor use and is IP65 rated for weather resistance.
• If hardwiring, ensure all electrical connections comply with local electrical codes. Consult a qualified electrician if unsure.
• Usapinza chikwata mumvura.
• Use only with a 20-amp GFCI outlet if using plug-in installation.
• Avoid looking directly into the LED lights when illuminated, as this may cause eye strain.

Chii Inosanganisirwa

Iva nechokwadi chekuti zvese zvakanyorwa pazasi zviripo mupakeji yako:

Mufananidzo: Yakaputika view diagram showing the LED light unit, mounting bracket, screws (small box, medium box, wood), wall anchors, wire nuts, and translucent plug.

• LED Light Unit with Motion Sensor
• Kuisa Bracket
• Mounting Screw
• Small Box Screw (x2)
• Medium Box Screw (x2)
• Wood Screw (x2)
• Chibatiso cheWall (x2)
• Waya Nut (x2)
• Translucent Plug
• Foam Gasket

Setup uye Installation

The Good Earth Lighting LED Outdoor Security Flood Light offers two installation methods: plug-in or direct wire. Choose the method that best suits your needs.

1. Plug-in Kuisirwa

For plug-in installation, ensure you have a readily accessible 20-amp GFCI outdoor outlet. The light comes with a power cord for this purpose.

Image: The flood light installed on a wall, with its power cord plugged into an outdoor GFCI outlet.

1. Select a suitable mounting location near a 20-amp GFCI outdoor outlet.
2. Secure the mounting bracket to the wall or eave using appropriate screws and wall anchors (if needed).
3. Route the power cord through the designated opening in the mounting base. The base has punch-out sections to accommodate the cord for a flush mount.
4. Batanidza mwenje wemwenje kune inokwirisa bracket.
5. Plug the power cord into the GFCI outlet.

2. Direct Wire Installation

For direct wire installation, the pre-attached plug can be removed. This method requires connecting the light directly to a junction box.

Image: A hand using wire cutters to remove the plug from the flood light's power cord, illustrating preparation for direct wiring.

1. YAMBIRO: Disconnect power at the circuit breaker before beginning.
2. If converting from plug-in to direct wire, carefully cut off the plug from the power cord.
3. Strip the insulation from the wires to expose the copper conductors.
4. Chengetedza bhuraketi rekukwira kune junction box.
5. Connect the light's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts.
6. Nyatsopinza waya dzese mubhokisi rekusangana.
7. Attach the light fixture to the mounting bracket, ensuring a secure and weather-tight seal.
8. Dzorera simba pamutambo wedunhu.

Operating Instruction

The flood light features a motion sensor with adjustable settings for optimal performance.

Image: The motion sensor unit with two adjustable dials labeled 'TIMER' and 'RANGE'.

Motion Sensor Settings:

• Range Adjustment: Use the "RANGE" dial to set the motion detection distance. The sensor can detect motion up to 70 feet with a 180-degree detection angle.
• Kugadzirisa Nguva: Use the "TIMER" dial to set how long the light remains on after motion is detected. Options typically range from 1 to 10 minutes.
• Preset Setting: The light comes with a preset setting of 50 feet detection range and a 3-minute timer.

Adjust the individual light heads to direct illumination precisely where needed for maximum coverage.

Image: A diagram showing the flood light mounted on a house, illustrating its wide light coverage extending 46 feet horizontally and 39.3 feet outwards.

Maintenance

• Kuchenesa: Nguva nenguva chenesai lenzi yemwenje ne sensor yekufamba ne soft, damp jira. Usashandise abrasive cleaners kana solvents.
• Kuongorora: Regularly inspect the power cord (if applicable) and all connections for any signs of wear, damage, or corrosion.
• MaODs: The integrated LED lights are designed for long life (up to 50,000 hours) and are not user-replaceable.

Kugadzirisa matambudziko

Zvinotsanangurwa

Warranty uye Support

This Good Earth Lighting product comes with a 6-year limited warranty. For warranty claims, technical support, or further assistance, please contact Good Earth Lighting customer service.

Visit the official Good Earth Lighting webwebhusaiti yeruzivo rwekuonana uye mitemo yakadzama yewarandi.