Huepar SW-T100 3-in-1 Laser Measurement Tool User Manual

1. Nhanganyaya

The Huepar SW-T100 is a versatile 3-in-1 measurement tool designed for various applications in construction, home improvement, and DIY projects. It integrates a laser distance meter, a green cross line laser level, and a traditional tape measure into a single compact device. This manual provides detailed instructions for safe and effective operation of your device.

Image 1.1: The Huepar SW-T100 demonstrating its three core measurement functions.

2. Safety Information

This device uses a Class 2 laser (490-560nm, <1mW). Observe the following safety precautions:

• Usatarise zvakananga mu laser beam.
• Avoid directing the laser beam at other people or reflective surfaces.
• Do not disassemble the device; laser radiation exposure may occur.
• Chengetedza mudziyo usingasvikike nevana.
• Use only the specified Type-C charging cable.

3. Package Zviri mukati

Ona kuti zvinhu zvese zviripo mupasuru yako:

• 1x Huepar SW-T100 3-in-1 Laser Measurement Tool
• 1x Type-C yekuchaja Cable
• 1x Portable Carry Bag
• Tambo yeRuoko ye1x
• 1x Auxiliary Measuring Target Plate
• 1x Chinyorwa cheMushandisi (gwaro iri)

Image 3.1: All components included in the Huepar SW-T100 product box.

4. Setup

4.1. Kuchaja Chishandiso

The device is equipped with a built-in 3.7V / 600mAh Lithium-Ion rechargeable battery. Before first use, fully charge the device.

1. Batanidza tambo yekuchaja yeType-C yakapihwa kune chinongedzo chekuchaja chiri pamudziyo.
2. Connect the other end of the cable to a standard USB power adapter (not included).
3. Chiratidzo chekuchaja chiri pachiratidziro chicharatidza mamiriro ekuchaja.
4. Kuchaja kwakazara kunowanzotora maawa mashoma.

Image 4.1: The device being charged via its Type-C port.

4.2. Chekutanga Power On

Press the Power ON/Measure button to turn on the device. The display will illuminate, and the device will be ready for use.

5. Operating Instructions

5.1. General Controls

The device features several buttons for various functions:

• Power ON/Measure Button: Turns the device on/off and initiates measurements.
• Bhatani reModhi yeLaser Level: Activates the green cross line laser.
• Unit Switch/Sound Button: Inochinja mayuniti ekuyera uye inodzora kuburitswa kwenzwi.
• Benchmark/Mode Switch Button: Selects measurement reference points and different measurement modes.
• Addition/Subtraction Buttons: Adds or subtracts measurements.
• Bhatani rekuchengetedza data: Saves current measurement data.
• Turn off/Clear Button: Clears the last measurement or turns off the device with a long press.

5.2. Laser Distance Measurement Mode

This mode provides precise distance measurements up to 330ft/100M with an accuracy of ±1/16 inch.

1. Press the Power ON/Measure button to activate the laser.
2. Aim the laser at the target point.
3. Press the Power ON/Measure button again to take a measurement. The result will be displayed on the screen.

Kuyera Mhando:

The device supports various measurement functions:

• Distance Measurement: Single point-to-point distance.
• Nharaunda Kuyera: Inoverenga nzvimbo yenzvimbo.
• Kuyerwa kweVolume: Inoverenga huwandu hwenzvimbo.
• Urefu Husina Kunanga (Pythagoras): Calculates height using two or three measurements.
• Nzvimbo yeWall: Inoverenga nzvimbo yese yemadziro akawanda.
• Kuramba Kuyera: Provides real-time distance updates as you move the device.

Image 5.1: Visual representation of the 9 available measurement modes.

Pfungwa dzeKutarisa:

You can select the measurement reference point:

• Front-based: Measures from the front edge of the device.
• Rear-based: Measures from the rear edge of the device.
• Screw-hole based: Measures from the tripod screw hole.

Voice Broadcast:

The device features real-time voice feedback for measurements, enhancing readability and efficiency, especially in challenging conditions or for users with limited vision.

• Long press the Unit Switch/Sound button to switch between Chinese voice, English voice, or to turn off the sound.
• Note: The device does not broadcast voice while charging.

Image 5.2: The voice broadcast feature in action, providing audible measurement readings.

Data Memory:

The device can store up to 100 readings, allowing you to recall past measurements without manual notes.

5.3. Green Cross Line Laser Level Mode

This mode projects bright green horizontal and vertical cross lines, ideal for tasks like picture hanging, shelf installation, and tile alignment. Accuracy is ±1/9 inch.

1. Press the Laser Level Mode button to activate the green cross lines.
2. Place the device on a stable surface or mount it on a tripod using the 1/4"-20 threaded mount.
3. Sikirini inoratidza maangles kubva -90° kusvika +90° yakatwasuka.
4. If the angle is > ±4°, the 'Out' indicator will flash on the screen, and the laser line will flash rapidly, indicating the device is not level.

Image 5.3: Using the green cross line laser for leveling tasks.

5.4. Tape Measure Function

The integrated digital tape measure extends up to 6.5ft/2M for traditional short-distance measurements.

• Pull out the tape measure from the side of the device.
• The tape measure features both imperial and metric markings.

5.5. Unit Kuchinja

Press the Unit Switch/Sound button to cycle through available measurement units (m, cm, mm, ft, ft+inches, ft+fractions).

5.6. Automatic Shut-off

To conserve battery life, the device will automatically shut off after 150 seconds of inactivity. This setting cannot be changed.

6. Kuchengeta uye Kuchengeta

• Kuchenesa: Pukuta mudziyo nekanyoro, damp jira. Usashandise makemikari ane hasha kana abrasive cleaners.
• Kuchengeta: Store the device in its portable carry bag in a cool, dry place when not in use.
• Rugged Design: The device features a tough TPE housing, providing resistance against drops, dust, and light water spray (IP54 rated). While durable, avoid intentional exposure to harsh conditions.

Image 6.1: The device's robust construction and tripod mounting option.

7. Kugadzirisa matambudziko

• Mudziyo haubatike: Ensure the battery is charged. Connect to the Type-C charger and try again.
• Inaccurate laser measurements: Ensure the laser lens is clean. Verify the correct reference point is selected. Ensure the target surface is flat and reflective enough. Use the auxiliary target plate if needed.
• Laser line flashing in level mode: This indicates the device is outside its self-leveling range (> ±4°). Adjust the device's position until the flashing stops.
• Voice broadcast not working: Check if the voice broadcast is turned off by long-pressing the Unit Switch/Sound button. Voice broadcast is also disabled during charging.
• Auto shut-off too fast: The device is designed to shut off after 150 seconds of inactivity to save battery. This duration is fixed and cannot be adjusted.

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

9.1. Warranty

This Huepar laser measurement tool comes with a 2-year quality assurance. In the event of a product fault, free repair or replacement will be provided.

9.2. Technical Support

Huepar is committed to providing best-in-class service to our customers. We offer:

• 24/7 Service Team (response within 24 hours & solution within 48 hours).
• Hupenyu Hwese technical Rutsigiro.
• Worldwide Maintenance Center for faster repair or replacement.

For support, please visit the official Huepar website or contact our customer service team directly.

10. Chigadzirwa Vhidhiyo Pamusoroview

Tarisa vhidhiyo iyi nekukurumidzaview of the Huepar 3-in-1 Laser Measurement Tool's features and functions.

Video 10.1: An official product video demonstrating the key features and usage scenarios of the Huepar SW-T100 3-in-1 Laser Measurement Tool. This video highlights the voice broadcast, distance measurement, laser leveling, and tape measure functions.