Bewinner H310M-S2 Motherboard User Manual

1. Nhanganyaya

This manual provides detailed instructions for the installation, operation, and maintenance of your Bewinner H310M-S2 Motherboard. Please read this manual thoroughly before installing or using the product to ensure correct setup and optimal performance. This motherboard is designed to support 8th and 9th generation Intel Core i9, i7, i5, and i3 processors, as well as Pentium and Celeron series processors, utilizing the LGA 1151 socket.

2. Safety Information

Chengeta matanho ekuchengetedza anotevera panguva yekuisa nekushanda:

• Gara uchibvisa magetsi kubva pakombuta yako usati waisa kana kubvisa chero chinhu.
• Pfeka anti-static wrist tambo kana kugara uchibata chinhu chesimbi pasi kuti uburitse magetsi akamira usati wabata mamaboard kana zvimwe zvinhu.
• Bata mamaboard nemapendero ayo kudzivirira kubata zvinhu zvinonzwisa tsitsi.
• Ita shuwa kufefetedza kwakaringana mukati mekombuta yako kudzivirira kupisa.
• Chengetedza mamaboard kure nekunyorova uye kupisa kwakanyanya.

3. Package Zviri mukati

Ona kuti zvinhu zvese zviripo mupasuru yako:

• Bewinner H310M-S2 Motherboard
• I/O Backplate

Kana chero zvinhu zvisipo kana kukuvadzwa, ndapota taura nemutengesi wako.

4. Chigadzirwa Pamusoroview

The Bewinner H310M-S2 is a micro-ATX motherboard featuring the Intel H310 Express Chipset. It is designed for robust performance in home, office, and gaming environments.

Mufananidzo: Pamusoro-pasi view of the Bewinner H310M-S2 motherboard, showcasing the LGA 1151 CPU socket, two DDR4 DIMM slots, PCIe slots, SATA ports, and various headers.

Zvinokosha:

• CPU kuenderana: Supports 8th and 9th Gen Intel Core i9/i7/i5/i3, Pentium, and Celeron processors (LGA 1151).
• Memory: Dual-channel DDR4 architecture with 2 DIMM slots, supporting up to 32GB at 2666/2400/2133 MHz.
• Kuwedzera Slots: 1x PCI Express x16 (PCIe 3.0) and 2x PCI Express x1 (PCIe 2.0).
• Kuchengeta: 4x Serial ATA 6Gb/s interfaces and 1x M.2 slot.
• Audio: Realtek ALC887 codec for 2/4/5.1/7.1 channel output.
• Network: Realtek LAN chip (10/100/1000 Mbit).
• Vhidhiyo Zvinobuda: D-Sub (VGA) port.

5. Setup uye Kuiswa

Tevedza aya matanho ekumisikidza kwakaringana kwebhodhi rako reamai uye zvikamu.

5.1. Kuiswa kweCPU

1. Tsvaga iyo LGA 1151 CPU socket pane mamaboard.
2. Zvinyoro sunda pasi rinoremerwa lever uye woidhonzera padivi kuti uvhure CPU socket retention furemu.
3. Carefully align the notches on your Intel LGA 1151 CPU with the corresponding keys on the socket. Ensure the gold triangle on the CPU matches the triangle on the socket.
4. Place the CPU into the socket without forcing it. It should sit flat.
5. Vhara iyo yekuchengeta furemu uye sunda chinoremedza chireveredzo kumashure panzvimbo yayo yakakiiwa.

Mufananidzo: Pedyo-up view of the LGA 1151 CPU socket with its retention mechanism and the two adjacent DDR4 memory slots.

5.2. Memory (RAM) Kuiswa

1. Tsvaga nzvimbo mbiri dzeDDR4 DIMM.
2. Vhura zvimedu kumagumo ese eDIMM slot.
3. Gadzirisa notch paDDR4 memory module nekiyi muDIMM slot.
4. Isa memory module zvakasimba muspot kusvika maclip apinda panzvimbo yawo. Iva nechokwadi chekuti maclip ese ari maviri akavharwa.

5.3. Storage Device Installation (M.2 and SATA)

5.3.1. M.2 SSD Kuiswa

1. Tsvaga iyo M.2 slot pane motherboard.
2. Bvisa siruu yeM.2 standoff.
3. Insert your M.2 SSD into the slot at a 30-degree angle.
4. Sundidzira pasi M.2 SSD zvinyoro nyoro woisunga nesikuruu yekumira.

5.3.2. SATA Drive Installation

1. Connect one end of a SATA data cable to one of the four SATA 6Gb/s ports on the motherboard.
2. Batanidza imwe magumo eSATA data tambo kune yako SATA hard drive kana SSD.
3. Batanidza tambo yemagetsi yeSATA kubva kuyuniti yako yemagetsi (PSU) kudhiraivha yeSATA.

Mufananidzo: Pedyo-up view of the PCI Express x16 slot, PCI Express x1 slots, and the M.2 slot, indicating expansion and storage options.

5.4. Kuisa Kadhi Rekuwedzera (PCIe)

1. Locate the desired PCI Express x16 or x1 slot.
2. Bvisa inowirirana yekuwedzera slot kavha kubva pakombuta yako.
3. Align your expansion card (e.g., graphics card, sound card) with the slot and press it firmly until it is fully seated.
4. Batanidza kadhi pabhokisi ne screw.

5.5. Connecting Front Panel and Peripherals

Connect the cables from your computer case (e.g., power button, reset button, USB ports, audio jacks, speaker) to the corresponding headers on the motherboard. Refer to the motherboard layout for exact header locations.

• Front Panel Header: For power button, reset button, HDD LED, power LED.
• Front Panel Audio Header: For front audio jacks.
• USB 3.1 Gen 1 Header: For front USB 3.0 ports.
• USB 2.0/1.1 Headers: For front USB 2.0 ports.

5.6. Simba Connection

1. Connect the 24-pin ATX main power connector from your PSU to the 24-pin power socket on the motherboard.
2. Connect the 4-pin ATX 12V power connector from your PSU to the 4-pin power socket near the CPU.
3. Connect the CPU fan to the CPU fan header and any system fans to the system fan headers.

6. Kushanda

6.1. Kutanga Kutanga

After completing all hardware installations, connect your monitor, keyboard, and mouse. Power on your computer. The system should boot up and display the BIOS/UEFI splash screen. If it does not, refer to the Troubleshooting section.

6.2. BIOS/UEFI Setup

To enter the BIOS/UEFI setup utility, press the designated key (usually DEL or F2) during the initial boot sequence. Within the BIOS/UEFI, you can configure system settings such as boot order, date/time, and hardware parameters. Save changes before exiting.

7. Kuchengeta

7.1. Kuchenesa

Regularly clean your computer's interior to prevent dust buildup, which can lead to overheating. Use compressed air to remove dust from fans, heatsinks, and motherboard components. Ensure the system is powered off and unplugged before cleaning.

7.2. BIOS/UEFI Updates

Nguva nenguva tarisa mugadziri wacho website for updated BIOS/UEFI versions. Updating the BIOS/UEFI can improve system stability, compatibility, and performance. Follow the instructions provided by the manufacturer carefully when performing an update.

8. Kugadzirisa matambudziko

Ichi chikamu chinotarisa zvinowanzoitika zvaungasangana nazvo.

8.1. Hapana Simba / Sisitimu Haibatike

• Check if the power supply unit (PSU) is properly connected to the wall outlet and switched on.
• Ensure the 24-pin ATX and 4-pin ATX 12V power connectors are securely seated on the motherboard.
• Iva nechokwadi chekuti tambo yebhatani remagetsi repaneru repamberi yakabatana nemazvo nemusoro webhodhi reamai.
• Test the PSU with another system or a PSU tester if available.

8.2. Hapana Display Output

• Ensure your monitor is connected to the correct video output port (either on the motherboard or a dedicated graphics card).
• Check if the graphics card (if installed) is properly seated in its PCIe slot and has adequate power connected.
• Reseat the RAM modules. Incorrectly seated RAM is a common cause of no display.
• Try booting with only one RAM module installed.

8.3. Kusagadzikana kweSystem / Kuparara

• Tarisa kana kupisa kwakanyanya. Iva nechokwadi chekuti CPU cooler yakaiswa zvakanaka uye mafeni ari kutenderera.
• Verify that all power connectors are secure.
• Mhanya maturusi ekuongorora ndangariro kuti utarise RAM isina kunaka.
• Ensure drivers for all components are up-to-date.

9. Zvinotsanangurwa

10. Warranty uye Tsigiro

10.1. Ruzivo rweWaranti

This Bewinner H310M-S2 Motherboard comes with a manufacturer warranty for 90 days from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

10.2. Technical Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Bewinner customer support through their official channels or the retailer where the product was purchased. You may find additional resources and driver downloads on the official Bewinner website.