FeverScan produces medical monitoring devices, specifically specializing in non-contact infrared thermometers and liquid crystal forehead temperature strips for home and clinical use.
FeverScan is a brand associated with temperature monitoring solutions designed for infants, adults, and professional medical environments. The product line primarily includes non-contact infrared thermometers, such as the Model 016-662, which offer hygienic and instant forehead readings without physical contact. These devices typically feature audible fever alarms, memory storage for recent readings, and multi-color backlit displays to indicate fever severity visually.
In addition to digital electronics, the FeverScan name is widely recognized for liquid crystal temperature strips (often known as Feverscan Ultra). These reusable or single-use strips provide a quick, non-invasive way to monitor body temperature by placing the strip on the forehead. The brand emphasizes ease of use, safety, and reliability, catering to families and healthcare providers looking for rapid diagnostic tools.
Mazuvano mabhuku kubva manuals+ yakarongedzwa kune iyi brand.
Mibvunzo yakajairika pamusoro pezvinyorwa, kunyoresa, uye rutsigiro rwemhando iyi.
Aim the thermometer at the forehead (right temporal region) from a distance of about 3–5 cm (1.2–2 inches). Press the 'On/Scan' button; the temperature is displayed instantly. Ensure hair and perspiration are removed from the forehead before measuring.
Press the 'MODE' button to cycle through the settings. The screen will display 'Body' for internal body temperature or 'Surface Temp' for reading the temperature of objects or liquids.
In Body mode, a green screen indicates normal temperature (≤37.3°C). Orange indicates a low fever (37.4°C–37.9°C), and red indicates a high fever (≥38.0°C).
The device is factory preset and usually does not require calibration. However, if there is a discrepancy, you can access the F4 menu by pressing 'MODE' for 2 seconds (to see F1), then pressing 'MEM' twice. Use the 'MODE' button to adjust the offset value.
The message 'HI' appears when the measured temperature is above the selected measurement range (e.g., higher than 43°C/109.4°F in Body Mode). Ensure you are in the correct mode (Body vs. Surface).