SYSTEM SENSOR SPSWLED-BT Series LED Indoor Selectable Output Mutauri Strobes Instruction Manual

Manual ndeyekushandisa nemhando dzinotevera:
Zita remutauro: “-B” vane mitauro miviri (Chirungu/French). “-BT” imitauro miviri yakaputirwa nemhete yekudimbura. "-P" ishanduro dzakajeka (hapana mazwi); "TP" iri plain packaged with trim ring. "-SP" akanyorwa "FUGUE".

Nhanganyaya

Zvigadzirwa Zvinotsanangurwa

Standard Operating Temperature:	32°F kusvika 120°F (0°C kusvika 49°C)
Humidity Range:	10 kusvika 93% Kwete-condensing
Normal Voltage (Vatauri):	25 Volts kana 70.7 Volts RMS
Maximum Supervisory Voltage	33 VDC
Mutauriri weFrequency Range:	400-4000 Hz
Magetsi Settings:	¼, ½, 1, 2 Watts
Strobe Flash Rate:	1 mwenje pasekondi
Chezita Voltage (Strobe):	Regulated 24 VDC
Kushanda Voltage Range (Strobe):	16 kusvika 33 VDC (24VDC zita)
Input terminal waya geji:	12 kusvika 18 AWG

Dimensions uye Mounting Options

Wall Mounted Product	Urefu	Upamhi	Kudzika	Mounting Options
Mutauriri Strobe (kusanganisira lens)	6.5 ″ (165.1 mm)	5.00 ″ (127 mm)	2.3 ″ (58.4 mm)	2-Waya Indoor Zvigadzirwa: Mutauri Strobes: SBBSPRL/WL (madziro) 4″ x 4″ x 21/ 8 ″ kana kudzika (Paunenge uchishandisa gumi nemaviri AWG, 12 AWG, kana kuwedzera waya mubhokisi, bhokisi rakadzika kana mhete yekuwedzera inokurudzirwa.)
Mutauri Strobe (kusanganisira lens) ine SBBSPRL/WL Surface Mount Back Box	6.62 ″ (168.1 mm)	5.12 ″ (130 mm)	4.55 ″ (115.5 mm)
CHERECHEDZA: SBBSPRL/WL Surface Mount Back Bhokisi rakagadzirirwa chete strobes yemutauri.

Ceiling Mounted Product	Diameter	Kudzika	Mounting Options
Mutauriri Strobe (kusanganisira lens)	6.8 ″ (172.7 mm)	2.33 ″ (59.2 mm)	2-Waya Indoor Zvigadzirwa: Mutauri Strobes: SBBCRL/WL (ceiling) 4″ x 4″ x 21/ 8 ″ kana kudzika (Paunenge uchishandisa gumi nemaviri AWG, 12 AWG, kana kuwedzera mamwe waya mubhokisi, bhokisi rakadzika kana mhete yekuwedzera inokurudzirwa.)
Mutauri Strobe (kusanganisira lens) ine SBBCRL/WL Surface Mount Back Box	6.92" (175.8 mm)	4.83" (122.7 mm)

CHIZIVISO: Bhuku rino richasiiwa nemuridzi/mushandisi wemudziyo uyu.

Usati waisa

Ndokumbira uverenge iyo System Sensor Voice Evacuation application Guide, iyo inopa ruzivo rwakadzama pamusoro pezviziviso zvemutauri, wiring uye yakakosha maapplication. Makopi ebhuku rino anowanikwa kubva kuSystem Sensor. NFPA 72 uye CAN/ULC-524 nhungamiro dzinofanirwa kucherechedzwa. System Sensor inokurudzirawo kuisa vatauri vearamu yemoto mukutevedzera NFPA 72, NFPA 70, NEC 760, CAN/ULC-524 uye Canadian Electrical Code.
Zvakakosha: Chishandiso chekuzivisa chinoshandiswa chinofanirwa kuyedzwa uye kuchengetedzwa zvinotevera zvinodiwa zveNFPA 72 muUL application kana CAN/ULC-S536 muULC application.

General Description

System Sensor yakatevedzana yemidziyo yekuzivisa inopa huwandu hwakawanda hwezvinonzwika uye zvinooneka zvishandiso zvehupenyu safet ziviso. Yedu indoor speaker strobes inouya ne7 field delectable Mandela settings. Iyo strobe chikamu chakagadzirirwa kushandiswa mu24VDC masisitimu. Mutauri wakagadzirwa kuti ushandiswe pa25 kana 70.7 volts, uye unoshanda pane chero mana emagetsi ekuisa nhanho. Yedu speaker strobes yakakodzera kune yakaoma nharaunda. Iwo maturusi anoitirwa zvemukati maapplication uye anotenderwa kukwirisa madziro uye sirin'i-kumisikidzwa. Izvi zvigadzirwa zvine magetsi kumashure zvinoenderana nechizvarwa chakapfuura cheSystem Sensor speaker strobes. Iine yakaderera yakazara harmonic kukanganisa, iyo System Sensor L-Series Vatauri vanopa yakanyanya kutendeseka inonzwika kubuda.
Vatauri Strobes midziyo yekuzivisa yeruzhinji inoitirwa kuzivisa vagari nezvechiitiko chekuchengetedza hupenyu. Mutauri akanyorwa ku ANSI/UL 1480/ULC 541 (public mode) uye strobe yakanyorwa kuANSI/UL 1638/ULC 526 (public mode).
System Sensor amber lens ALERT Vatauri Strobes akavanzika modhi yekuzivisa midziyo inoitirwa kuzivisa vashandi vakadzidziswa kuti vaongorore chiitiko chekuchengetedza hupenyu. Mutauri akanyorwa ku ANSI/UL 1480 (public mode) uye strobe yakanyorwa kuANSI/UL 1638 (private mode).

Moto Alarm System Kufunga

System Sensor inokurudzira midziyo yekuzivisa nzvimbo inotevedza NFPA 70 neNFPA 72 (UL applications) kana CAN/ULCS524 (ULC applications).
System Sensor inokurudzirawo kuisa vatauri vearamu yemoto mukutevedzera NFPA 70, NFPA 72, uye NEC 760.
(CAN/ULC-S524 mumashandisirwo eULC).

System Design

Iyo sisitimu yekugadzira inofanirwa kuve nechokwadi chekuti iyo yakazara ikozvino inodhirowa nemidziyo iri pachiuno haipfuure kugona kwazvino kwepaneji yekugovera, uye kuti mudziyo wekupedzisira padunhu unoitwa mukati meiyo yakayerwa vol.tage. Ruzivo rwazvino rwekuita masvomhu aya runogona kuwanikwa mumatafura ari mukati mebhuku rekushandisa. Kuti zvive nyore uye nekururama, shandisa voltage donhedza Calculator paSystem Sensor website
(www.systemsensor.com).
Pakuverenga voltage inowanikwa kune yekupedzisira mudziyo, zvinofanirwa kufunga nezve voltage nekuda kwekupokana kwewaya. Iko kukora kwewaya, kunoita kuti vhoriyamu idikitage drop. Matafura ekudzivisa waya anogona kuwanikwa kubva mumabhuku emagetsi. Ziva kuti kana wiring yeKirasi A yakaiswa, kureba kwewaya kunogona kusvika kaviri kureba sezvakungave kumasekete asingakwanise kukanganisa. Huwandu hwemastrobes paNAC imwe chete haifanire kudhirowa zvazvino kupfuura zvinotsigirwa neFire Alarm Control Panel (FACP).

Configurations for Notification Appliances

Inowanikwa Candela Settings
System Sensor inopa huwandu hwakawanda hwema candela marongero ehupenyu hwako kuchengetedza zvinodiwa. Kusarudza yako candela inobuda, tenderedza switch yekuseri kwechigadzirwa kune yaunoda kugadzika kenduru. (Ona Mufananidzo 1.) Tafura 1 inoratidza zviripo candela sarudzo.
Iyo candela yekugadzika inogona kusimbiswa kubva kumberi kweyuniti nekutarisa nepahwindo diki kumberi kwechigadzirwa. (Ona Mufananidzo 17 wenzvimbo yehwindo pamudziyo.) Zvose zvinogadzirwa zvinosangana nechiedza chinobuda profiles inotsanangurwa mune yakakodzera UL Mitemo. (Ona Mifananidzo 2, 3, uye 4.)

Mufananidzo 1 Candela Selector

Mufananidzo 2 Chiedza Chinobuda -Horizontal Dispersion

Madhigirii*	Percent of Rating
0	100
5-25	90
30-45	75
50	55
55	45
60	40
65	35
70	35
75	30
80	30
85	25
90	25
Compound 45 kuruboshwe	24
Musanganiswa 45 kurudyi	24
*Kushivirira kwe ± 1 dhigirii kunobvumidzwa.
A0467-00

Mufananidzo 3 Vertical Dispersion- Wall to Floor

Madhigirii*	Percent of Rating
0	100
5-30	90
35	65
40	46
45	34
50	27
55	22
60	18
65	16
70	15
75	13
80	12
85	12
90	12
*Kushivirira kwe ± 1 dhigirii kunobvumidzwa.
A0469-00

Mufananidzo 4 Chiedza chinobuda - vertical dispersion, sirin'i kumadziro kusvika pasi

Madhigirii*	Percent of Rating
0	100
5-25	90
30-45	75
50	55
60	45
65	35
70	35
75	30
80	30
85	25
90	25
*Kushivirira kwe ± 1 dhigirii kunobvumidzwa.
A0468-00

Tafura 1 UL/ULC Maximum Strobe Current Draw (mA)

	16-33 Volts
Candela	DC
15	18
30	22
75	70
95	75
110	85
115	90
135	105
150	110
177	115
185	120
FCP*	(ramangwana)
* FCP Moto Kudzora pani, kushandiswa mune ramangwana

Ikozvino Dhirowa uye Kunzwika ratings

Kune iyo strobe, kudhirowa kwese kwese kwakanyorwa muTebhura 1. Reference bi national harmonised standard UL 1480/ULC 541 yezvinodikanwa zvishoma.

Inowanikwa Simba Settings kune Vatauri

System Sensor inopa huwandu hwakawanda hwemasetirwo emagetsi ehupenyu hwako hunodiwa, kusanganisira ¼, ½, 1, uye 2W. Inzwi mazinga data paUL 1480 inogona kuwanikwa muTafura 2.

Tafura 2 Inzwi Mazinga: Minimum Mutauri Strobe Sound Output kune imwe neimwe Transformer Simba Setting

Setting	Mutauri Strobe (Wall or Ceiling) UL Reverberate (dBA @ 10 ft)
¼ W	76
½ W	79
1 W	82
2 W	83

CHENJERERO:
Chiratidzo mazinga anodarika 130% akayerwa chiratidzo voltage anogona kukuvadza mutauri. Nekuda kweizvozvo, kubatana kwepombi kwakashata kunogona kukonzera kukuvara kwemutauri. Izvi zvinoreva kuti kana pombi ye25V yasarudzwa kana 70.7V ampLifier iri kushandiswa, kukuvadzwa kwemutauri kunogona kukonzera. Naizvozvo, iva nechokwadi chekusarudza akakodzera matepi eiyo amplifier voltage/input simba level musanganiswa uri kushandiswa.

Kuti uverenge kupararira kwenzwi paUL 1480 uye ULC 541, tarisa Tafura 3.
Tafura 3 Mamiriro Ekuita (Yakaverengerwa Yakaipisisa Nyaya Inogumira)

Wall		Ceiling
Horizontal Axis		Horizontal Axis
Angle	Decibel kurasikirwa (dBA)	Angle	Decibel kurasikirwa (dBA)
0° (ref)	0 (ref)	0° (ref)	0 (ref)
+/- 75	-3	+/- 80	-3
ND	-6	ND	-6
+/- 90	-4.8	+/- 90	-4.3
Vertical Axis		Vertical Axis
Angle	Decibel kurasikirwa (dBA)	Angle	Decibel kurasikirwa (dBA)
0° (ref)	0 (ref)	0° (ref)	0 (ref)
+/- 85	-3	+/- 80	-3
ND	-6	ND	-6
+/- 90	-4.3	+/- 90	-4.6

Installation

Wiring uye Kubhururuka
Wiring dzese dzinofanirwa kuiswa zvichiteerana neNational Electric Code (UL applications), (Canadian Electric Code (ULC applications), uye macode emunharaunda pamwe nechiremera chine masimba. Wiring haifanire kunge yakareba kudaro kana saizi yewaya izvo zvingakonzeresa. mudziyo wekuzivisa kuti ushande kunze kwezvakadhindwa zvakadhindwa.

Saizi dzewaya dzinosvika 12 AWG (2.5 mm²) dzinogona kushandiswa nendiro yekuisa. Iyo mounting plate inotakura ine materminals akagadzirirwa 12 AWG field wiring.

Gadzira mawaya nekubvisa anenge 3/8 ″ yekudzivirira kubva kumucheto kwewaya yemunda. Wobva watsveta magumo etambo pasi peiyo cl yakakodzeraamping ndiro uye simbisa clamping plate screw. CHERECHEDZA: Usaisa wiring yemagetsi pasi pe terminal screws. Waya dzinobatanidza mudziyo kune control panel dzinofanira kutyorwa pachiteshi chemagetsi kuitira kuchengetedza magetsi.
Ona Mufananidzo 6 kune zvakadzama wiring connections; ona Mufananidzo 5 wenzvimbo yezviteshi, shorting spring, uye wire strip guide.

Wiring Diagrams

Shorting Spring Feature. Midziyo iyi inogonesa kuenderera mberi kwesystem yekutarisa wiring yemunda midziyo isati yaiswa. Iyo inokwirisa ndiro ine chitubu chipfupi pakati pematerminal 2 ne3 ayo anozodzima otomatiki kana chigadzirwa chaiswa, kugonesa kutarirwa kweiyo yekupedzisira system. (Ona Mufananidzo 5.)

Mufananidzo 5 Wiring Terminals, Shorting Spring, uye Strip Guide

WIRING TERMINALS

1. Negative (-). Mutsetse mukati nekubuda
2. Zvakanaka (+). Mutsetse mukati nekubuda
3. Zvakanaka (+). Mutsetse mukati nekubuda

Mufananidzo 6 System Wiring

Wiring Terminals:

1. Negative (-). Mutsetse mukati nekubuda
2. Zvakanaka (+). Mutsetse mukati nekubuda
3. Zvakanaka (+). Mutsetse mukati nekubuda

Mufananidzo 7 Mutauri Wattage uye Voltage Zvirongwa

Isa Back Box

1. Natanidza kumashure bhokisi kumadziro kana sirin'i.
   • Junction mabhokisi akaiswa achitevera indasitiri standard. (Ona Mifananidzo 8 ne10.)
   • Surface mount back mabhokisi anogona kuchengetedzwa zvakananga kumadziro kana sirin'i. Kushandisa bhuraketi repasi rine siruu yepasi isarudzo. (Ona Mifananidzo 9 ne11.)
   • Note for positioning: Mabhokisi ekumisikidza kumadziro: Kwirai nemuseve wekumusoro wakanongedza kumusoro. (Ona Mufananidzo 14.)
   • Note for positioning: Ceiling Mount Back boxes: Ceiling surface mount back box SBBCR/WL ibhokisi rekumashure rakajairwa resirin'i horn strobes, chime strobes, strobes, speaker, uye speaker strobes. Shandisa maburi ekumusoro (SPK) ekukwirisa sirin'i sipika uye zvigadzirwa zvemutauri strobe. Shandisa pasi (STR) maburi ekumisikidza sirin'i horn strobe, chime strobe uye strobe yekuisa zvinodiwa. (Ona Mufananidzo 13.)
2. Sarudza kugogodza kwakakodzera uye vhura sezvinodiwa.
   • Maburi ekugogodza akadhindwa anopihwa mativi ebhokisi ¾ inch uye ½ inch conduit adapter. Maburi ekugogodza ari kuseri kwebhokisi anogona kushandiswa ¾ inch uye ½ inch kumashure kwekupinda.
   • Kana ukashandisa ¾ inch knockout: Kuti ubvise ¾ inch knockout, isa blade ye-flat-head screwdriver pamucheto wekunze uye shandisa nzira yako kumativi ekugogodza paunenge uchirova screwdriver. (Ona Mufananidzo 15a.)
     CHERECHEDZA: Chenjerera kuti usarove kugogodza padhuze nepamusoro pekumusoro kwekumusoro mount back box.
   • V500 uye V700 mujaho wekugogodza anopihwa zvakare. Shandisa V500 kune yakaderera profile zvikumbiro uye V700 yepamusoro profile applications.
     Kuti ubvise knockout, shandura pliers kumusoro. (Ona Mufananidzo 15b.)

Isa Mounting Plate uye Appliance

1. Batanidza mounting plate uchishandisa yakapihwa Philips head screws. Junction bhokisi rinoshandisa 2 screws. Surface mount back box inoshandisa 4 screws. (Ona Mifananidzo 8-11.)
2. Batanidza munda wiring zvinoenderana nematanho ekupedzisira. (Ona Mufananidzo 6.)
3. Kana chigadzirwa chacho chisingafaniri kuiswa panguva ino, shandisa chifukidzo cheguruva chekudzivirira kudzivirira kusvibiswa kwemagetsi ekugadzira wiring pane mounting plate.
4. Kubatanidza chigadzirwa kune mounting plate:
   • Bvisa chivharo cheguruva chinodzivirira.
   • Hoka ma tabo ari pamusoro pechigadzirwa chivakwa mumigero pa mounting plate.
   • Pivot chigadzirwa panzvimbo kuti ubatanidze materminal ari pamounting plate. Ita shuwa kuti ma tabo ari kuseri kwechigadzirwa chivakwa anobatana zvizere ne mounting plate.
   • Bata chigadzirwa panzvimbo neruoko rumwe, uye chengetedza chigadzirwa nekusimbisa single mounting screw pamberi pechigadzirwa imba.

CHENJERERO:
Iyo "kubata panzvimbo" snaps haina kuitirwa kuchengetedza chigadzirwa kubhokisi rekumashure. Chigadzirwa chacho chinofanira kuchengetedzwa kubhokisi rekumashure uchishandisa screws yakapihwa

CHENJERERO:
Kupera kwefekitari hakufanirwe kuchinjwa: Usapende!

CHENJERERO:
Usanyanya kuomesa mounting plate screws; izvi zvinogona kuita kuti mounting plate ichinjike.

Bvisa Ceiling Model Appliance

Mamodheru eceiling chete: Kuti ubvise chigadzirwa kubva mundiro inokwirisa, sunungura siruu inosungirira uye wodzvanya bhatani rekukiya. (Ona Mufananidzo 12.)

Mounting Drawings

Mufananidzo 8 Kukwidza Chishandiso cheWall (Double-gang box)

Mufananidzo 9 Pamusoro Inokwirisa Wall Device (SBBRL/SBBWL)

 Mufananidzo 10 Kukwirisa Ceiling Device (Double-Gang Box)

Mufananidzo 11 Pamusoro Inokwirisa Ceiling Device (SBBCRL/SBBCWL)

Mufananidzo 12 Ceiling Device - Nzvimbo Yekuvhara Bhatani

Mufananidzo 13 Kusarudza screw nzvimbo mune sirin'i yekuisa yekumusoro-gomo kumashure bhokisi

1. Midziyo yezvitauriri inoiswa panzvimbo yakanyorwa kuti “SPK
   

Mufananidzo 14 Surface Mount Back Bhokisi "Kumusoro" Museve

Mufananidzo 15 Knockout uye V500/V700 Kubviswa kweSurface Mount Back Bhokisi

Mufananidzo 15A Knockout size

Mufananidzo 15B Wire Mold Kubviswa

CHERECHEDZA: Chenjerera kuti usarove kugogodza padhuze nepamusoro peiyo vhezheni yemadziro ekumusoro mount back box.

Tamper Screw

Zve tamper kuramba, iyo yakajairwa nhapwa screw inogona kutsiviwa neTorx screw, yakarairwa zvakasiyana.
Kuti ubvise siruu yakasungwa, dzosera sikuruu uye isa kudzvanya kuseri kwescuru kusvika yabvisa imba. Tsiva neTorx screw. (Ona Mufananidzo 16.)
Mufananidzo 16 Tamper Screw

Test Points

System Sensor L-Series ine LED yekuzivisa midziyo inouya ine diagnostic test point kuti ive nyore kuwana nekushandisa dijitari vol.tage mita yekuyera mudziyo voltage pasina kubvisa kubva pamadziro kana denga.

1. Isa digital voltage metres positive probe mu (+) test point.
2. Isa digital voltage meter negative probe mu (-) test point.
   CHERECHEDZA: Kumaka kunoratidza chiratidzo polarity kana dunhu richishanda.

CHENJERERO:
Kutenderera kupfupi kweaya mapoinzi ekuyedza kunogona kukonzera kusashanda kwechishandiso chisina kunaka

Mufananidzo 17 Nzvimbo dzekuedza

YAMBIRO

ZVIGUMO ZEVATAURI

Gara uine shuwa kuti ivo vatauri vega vanoyedzwa mushure mekuiswa pamitemo yeNFPA. Vatauri vangasanzwika. Kudanidzira kwemukurukuri kunosangana (kana kudarika) ikozvino Underwriters Laboratories' zviyero.
Zvisinei, mukurukuri angasazivisa munhu anorara zvakanaka kana kuti achangobva kushandisa zvinodhaka kana kuti anga achinwa zvinwiwa zvinodhaka. Mukurukuri anogona kusanzwikwa kana akaiswa pauriri hwakasiyana nemunhu ari munjodzi kana kuti akaiswa kure zvakanyanya kuti anzwikwe pamusoro peruzha rwakapoteredza rwakadai semotokari, maairconditioner, michina kana midziyo yemimhanzi inogona kudzivirira vanhu vakasvinura kunzwa. alarm. Mukurukuri angasanzwikwa nevanhu vasinganzwi zvakanaka.

YAMBIRO

ZVINOGONA KUTI STROBES

Iyo strobe haishande pasina simba. Iyo strobe inowana simba rayo kubva pamoto / chengetedzo pani inotarisisa iyo alarm system. Kana simba rikagurwa chero chikonzero, iyo strobe haizope yaunoda odhiyo kana yekuona yambiro.
Iyo chiratidzo strobe inogona kunge isingaonekwe. Iyo yemagetsi inoona yambiro chiratidzo inoshandisa maLED ane yakabatana lens system. Inopenya kamwechete sekondi yega yega. Iyo strobe haifanirwe kuisirwa muchiedza chezuva chakananga kana nzvimbo dzine mwenje wakanyanya (kupfuura 60 tsoka makenduru) uko kupenya kwekuona kunogona kuregererwa kana kusaonekwa. Iyo strobe inogona kusaonekwa nevasingaoni.

Iyo sign strobe inogona kukonzera pfari. Vanhu vane mhinduro yakanaka yephototropic kune zvinoonekwa zvinokurudzira nepfari, senge vanhu vane pfari, vanofanirwa kudzivirira kuratidzwa kwenguva refu kune nharaunda umo masaini estrobe, kusanganisira iyi strobe, inovhurwa.

Iyo chiratidzo strobe haigone kushanda kubva kune ekodhi magetsi emagetsi. Makodhi emagetsi emagetsi anogadzira magetsi akamiswa. Iyo strobe inofanirwa kuve isina kukanganiswa kunobva simba kuitira kuti ishande nemazvo. System Sensor inokurudzira kuti nyanga uye chiratidzo strobe zvigare zvichishandiswa pamwe chete kuitira kuti njodzi kubva kune chero ipi yezvipimo zviri pamusoro zvideredzwe.

FCC Chirevo

Midziyo iyi yakaedzwa uye yakawanikwa inoenderana nemiganhu yeKirasi B yedhijitari mudziyo, zvichienderana nechikamu 15 cheFCC Mitemo. Iyi miganho yakagadzirirwa kupa dziviriro inonzwisisika kubva mukukanganisa kunokuvadza mukuiswa kwekugara. Mudziyo uyu unogadzira, unoshandisa uye unogona kuvheneka redhiyo frequency simba uye, kana isina kuiswa uye kushandiswa zvinoenderana nemirairo, inogona kukonzera kukanganisa kunokanganisa kufambiswa kweredhiyo. Nekudaro, hapana vimbiso yekuti kukanganisa hakuzoitika mune imwe yekumisikidza. Kana mudziyo uyu ukakonzera kukanganisa kunokuvadza redhiyo kana terevhizheni, iyo inogona kutariswa nekudzima uye nekubatidza mudziyo, mushandisi anokurudzirwa kuyedza kugadzirisa kukanganiswa neimwe kana anopfuura eanotevera matanho:

• Reorrent kana kutamisa antenna inogamuchira.
• Wedzera kupatsanurwa pakati pemidziyo nemugamuchiri.
• Batanidza midziyo mune yekubuda padunhu rakasiyana neiyo iyo inotambirwa yakabatana.
• Bvunza mutengesi kana nyanzvi yeredhiyo/TV ine ruzivo kuti ubatsirwe.

Iyi dhijitari yeKirasi B inowirirana neCanada ICES-003.

Ichi chiratidzo (chakaratidzwa kuruboshwe) pachigadzirwa (s) uye / kana magwaro anoperekedzwa chinoreva kuti zvigadzirwa zvemagetsi nemagetsi zvakashandiswa hazvifanirwe kusanganiswa nemarara epamba. Kuti uwane kurapwa kwakakodzera, kupora nekudzokorodza, taura nevakuru venzvimbo yako kana mutengesi uye bvunza nzira kwayo yekurasa.

Midziyo yemagetsi neyemagetsi ine zvinhu, zvikamu uye zvinhu, izvo zvinogona kuve nengozi kune zvakatipoteredza uye zvinokuvadza kuhutano hwevanhu kana tsvina yemagetsi neyemagetsi midziyo (WEEE) isina kuraswa nemazvo.

Supplemental Information

Kuti uwane ruzivo rwazvino rweWaranti, ndapota enda ku:
http://www.systemsensor.com/en-us/Documents/E56-4000.pdf

Nekumisikidza kweMoto Alarm Systems, ndapota enda ku:
http://www.systemsensor.com/en-us/Documents/I56-1558.pdf

Vatauri chete: Kuti uwane Ruzivo rwazvino rwakakosha rweGungano, ndapota enda ku:
http://www.systemsensor.com/en-us/Documents/I56-6556.pdf

Warranty Information

Kuganhurirwa kwe
Moto Alarm Systems

Vatauri Chete:
Ruzivo rweMusangano

System Sensor° ichiratidzo chakanyoreswa cheHoneywell International, Inc.
©2024 System Sensor.

Zvinyorwa / Zvishandiso

SYSTEM SENSOR SPSWLED-BT Series LED Indoor Selectable Output Mutauri Strobes [pdf] Bhuku reMirayiridzo SPSRLED, SPSRLED-B, SPSRLED-BT, SPSWLED, SPSWLED-B, SPSWLED-BT, SPSRLED-P, SPSWLED-P, SPSRLED-SP, SPSWLED-CLR-ALERT, SPSCRLED, SPSCRLED-B, SPSCRLED-BT, SPSCWLED, SPSCWLED-B, SPSCWLED-P, SPSCWLED-SP, SPSCWLED-BT, SPSCWLED-T, SPSCWLED-TP, SPSCWLED-CLR-ALERT, SPSWLED-BT Series LED Indoor Selectable Output Speaker Strobes, LED Indoor Selectable Output Speaker Strobes, Selectable Output Mutauri Strobes, Output Mutauri Strobes, Mutauri Strobes, Strobes

References

• User Manual