Mabhuku ekushandisa eLANCOM & Gwaro reVashandisi

Mabhuku ekushandisa, nhungamiro dzekugadzirisa, rubatsiro rwekugadzirisa matambudziko, uye ruzivo rwekugadzirisa zvigadzirwa zveLANCOM.

Zano: isa nhamba yakazara yemodhi yakadhindwa pane yako LANCOM label kuti uwane mhando yakakodzera.

Mabhuku ekudzidzisa eLANCOM

Zvinyorwa zvitsva, mabhuku ekushandisa akakurumbira, uye mabhuku ekushandisa akabatana nevatengesi vemhando iyi tag.

LANCOM ISG-1000 GmbH System Mushandisi Yekushandisa

Nyamavhuvhu 30, 2022
LANCOM ISG-1000 Quick Reference GuideCloud-ready ISG-1000 GmbH System USB interface You can use the USB interface to connect a USB printer or a USB storage device. Serial configuration interface Use the included serial configuration cable to connect the serial interface…

LANCOM 1900EF-5G Multi-WAN VPN-Gateway User Guide

Nyamavhuvhu 29, 2022
LANCOM 1900EF-5G Quick Reference Guide 1900EF-5G Multi-WAN VPN-Gateway 5G antenna connectors Connect the supplied cellular antennas to the connectors MAIN / AUX or MIMO1 / MIMO2 at the front of the device. WAN 1 interfaces (SFP / TP combo port)…

LANCOM 1926VAG Dual VDSL VPN Router User Guide

Nyamavhuvhu 29, 2022
  Hardware Quick Reference LANCOME 1926VAG Mounting & connecting ➀ G.FAST- / VDSL- / ADSL interfaces* If required, use the supplied DSL cables for the IP-based line to connect each G.FAST / VDSL / ADSL interface to a separate provider’s…

LANCOM GS-1108 GmbH Systems Mushandisi Guide

Nyamavhuvhu 27, 2022
GS-1108 GmbH Systems User Guide Mounting & connecting TP Ethernet ports Connect one of the TP Ethernet ports 1-8 via an Ethernet cable to your end device or another LAN switch. Power connector (on the back side of the device)…

LANCOM GS-2310 10-Ports Network Switch User Guide

Nyamavhuvhu 27, 2022
SYSTEMS Hardware Quick Reference LANCOM GS-2310 GS-2310 10-Ports Network Switch LANCOM GS-2310 Configuration interface (Console) Connect the serial interface via the included serial configuration cable to the serial interface of the device you want to use for configuring/monitoring the switch.…