Nhanganyaya
Thank you for choosing the Deli 4V Electric Screwdriver Set. This powerful and versatile tool is designed for various household tasks, including water and electricity installation, electrical maintenance, and home assembly. Featuring a manual and automatic integrated design, a built-in permanent magnet motor, a 2000mAh high-energy lithium battery, and 4-gear torque adjustment, this screwdriver offers convenience and efficiency for your DIY projects.
Package Zviri mukati
Ndokumbira utarise pasuru kuti uone kuti zvinhu zvese zviripo:
- Deli 4V Electric Screwdriver
- USB Type-C Yekuchaja Cable
- Extension Rod
- Screwdriver Bit Set (e.g., PH2, T10, H4, Slotted 4, etc.)
- Storage Case (for certain models/kits)
Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Rated Voltage | 4V |
| Battery Capacity | 2000mAh |
| Max. Torque | 5 N.m (Hard Torque) |
| Soft Torque | 0.7 Nm |
| Kugadziriswa kweTorque | 3 Magiya |
| Kuchaja Interface | Type-C |
| Kubhadharisa Voltage / Izvozvi | Hurefu 5V 2A |
| Kuchaja Nguva | 1-2 maawa |
| Pamberi/Reverse Basa | Ehe |
| Battery Level Display | Ehe |
| LED Off Delay | Ehe |
| Kurema | 0.4kg |
| Dimensions (approx.) | 180mm (Kureba) x 35mm (Upamhi) |
Gadzirira
1. Kutanga Kuchaja
- Before first use, fully charge the screwdriver.
- Connect the provided USB Type-C charging cable to the charging port at the base of the screwdriver.
- Connect the other end of the USB cable to a compatible 5V 2A USB power adapter (not included).
- The battery level indicator lights will show charging progress. A full charge typically takes 1-2 hours.
2. Installing Screwdriver Bits
- Sarudza yakakodzera screwdriver bit yebasa rako.
- Insert the bit into the magnetic collet at the front of the screwdriver. The strong magnetic adsorption will hold the bit securely in place.
- For extended reach, first insert the extension rod into the collet, then insert the desired bit into the extension rod.
Operating Instruction
1. Power On/Off and Direction Control
- To Power On/Tighten Screws (Forward): Press and hold the forward button (usually indicated by an arrow pointing right or 'F'). The screwdriver will start rotating to tighten screws.
- To Loosen Screws (Reverse): Press and hold the reverse button (usually indicated by an arrow pointing left or 'R'). The screwdriver will rotate in the opposite direction to loosen screws.
- Power Off: Release the button to stop the screwdriver. The tool operates on a 'push to start, release to stop' mechanism.
2. Torque Adjustment
The screwdriver features 3 gears for torque adjustment, allowing you to select the appropriate power for different tasks and materials:
- 1st Gear: 0.7-2 N.m (for delicate tasks or small screws)
- 2nd Gear: 2-3.5 N.m (for general assembly and medium screws)
- 3rd Gear: 3.5-5 N.m (for heavier duty tasks or larger screws)
Use the torque adjustment buttons (usually indicated by '+' and '-' or up/down arrows) to cycle through the gears. The current gear setting may be indicated by LED lights.
3. Manual Operation
In addition to electric operation, the screwdriver can also be used manually. Simply hold the handle and turn it left or right to manually tighten or loosen screws, providing greater control for precision tasks or when the battery is depleted.
4. Kuvhenekera kwe LED
The screwdriver is equipped with dual LED lighting that automatically turns on when the tool is in operation, illuminating your work area and allowing you to work effectively in dark or poorly lit conditions.
5. Zvikumbiro
This electric screwdriver is suitable for a wide range of applications:
- Furniture installation
- Digital device repair
- Toy assembly and repair
- Sports equipment maintenance
- General home DIY tasks
Maintenance
1. Kuchaja Bhatiri
- Charge the screwdriver when the battery indicator shows low power.
- Always use a compatible 5V 2A USB power adapter and the provided Type-C cable for charging.
- Dzivisa kuwandisa kana kubvisa zvachose bhatiri kuti rirebese hupenyu hwaro.
- The 2000mAh lithium battery is designed with four-fold protection: overcurrent, voltage, over temperature, and charge/discharge protection.
2. Kuchenesa nekuchengetedza
- After each use, wipe the screwdriver and bits with a clean, dry cloth to remove dust and debris.
- Usashandise makemikari akaomarara kana ekuchenesa hasha.
- Chengeta sikurudhiraivha nezvimwe zvinhu zvayo mubhokisi rakapihwa munzvimbo inotonhorera, yakaoma, kure nezuva rakananga uye hunyoro.
- Chengetedza pasingasvikirwi nevana.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Sikuruu haibatidzi. | Bhatiri rapera. | Chaja bhatiri zvizere (maawa 1-2). |
| Screwdriver lacks power or stops during use. | Low battery charge. Incorrect torque setting. | Recharge the battery. Adjust to a higher torque setting if needed. |
| Screwdriver bit slips or doesn't grip screw. | Incorrect bit size/type. Worn bit. | Ensure you are using the correct bit for the screw head. Replace worn bits. |
| Chiedza che LED hachishande. | Screwdriver not in operation. Faulty LED. | Ensure the screwdriver is operating. If still not working, contact support. |
Mazano Ekushandisa
- Tarisa Package Zviri mukati: Upon receiving your screwdriver set, carefully check all items against the 'Package Contents' section to ensure you have received the screwdriver, charging cable, extension rod, and all specified bits, including the storage case if applicable to your purchased kit.
- Optimal Torque: Always start with a lower torque setting and gradually increase it if more power is needed. This prevents overtightening and stripping screws, especially with delicate materials.
- Manual Finish: For very tight screws or when precise control is required, use the manual operation feature to finish tightening or loosening after initial electric use.
Warranty uye Support
Kuti uwane ruzivo nezvewarandi, rutsigiro rwehunyanzvi, kana mibvunzo nezvebasa, ndapota tarisa kadhi rewarandi riri muchigadzirwa chako kana kuti bata mutengesi/mugadziri zvakananga. Chengeta risiti yako yekutenga sehumbowo hwekutenga.
