Bhuku reMirayiridzo yeRF 433MHz Remote Control

1. Nhanganyaya

This manual provides detailed instructions for the setup, operation, and maintenance of your new RF 433MHz Remote Control (Model: CM-V15). This versatile remote is designed for controlling various devices such as Dooya curtain motors, garage doors, roller shutters, and other Tuya Smart Home compatible systems. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Zvimiro

• RF 433MHz wireless communication for reliable control.
• Available in 1, 2, or 15 channel configurations to manage multiple devices.
• Compatible with Dooya RF433 Curtain Motors (KT320/DT52/DT82/DT360).
• Suitable for electric door control, remote control curtains, motor forward/reverse rotation control, projection screen control, and blind control.
• Clear LCD display on 15-channel model for easy channel identification.

3. Zvinotsanangurwa

4. Package Zviri mukati

• 1 x RF 433MHz Remote Control (CM-V15)
• 2 x 1.5V AAA Mabhatiri
• 1 x Wall Mount Chikomberedzo

Note: The appearance of the remote control may vary slightly depending on the channel option (1, 2, or 15 channels).

Image: 15-channel remote control with included batteries and wall mount bracket.

5. Setup

5.1 Kuiswa kwebhatiri

1. Carefully slide open the battery compartment cover on the back of the remote control.
2. Insert two (2) 1.5V AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Vhara chivharo chebhatiri zvakachengeteka.

Mufananidzo: Rear view of the remote control with the battery compartment visible.

Video: Demonstration of battery installation and remote control assembly.

5.2 Kuisa Remote Control

The included wall mount bracket allows for convenient storage and access to your remote control.

1. Choose a suitable location on a wall or flat surface.
2. Use screws (not included) to secure the wall mount bracket to the desired surface.
3. Slide the remote control into the bracket until it clicks securely into place.

Image: Remote control securely placed in its wall mount bracket.

5.3 Pairing with a Motor

This remote control uses a learning code system and must be paired with your motor. It cannot directly copy other remote controls.

1. Press and hold the black BHODHI REMAHARA at the rear of the motor for approximately 2 seconds.
2. Release the button when the motor's indicator light flashes once.
3. Tinya ipapo ipapo P2 bhatani on the back of the remote controller once.
4. The motor's indicator light will flash slowly. Press the P2 bhatani on the back of the remote controller one more time.
5. The motor's indicator light will flash 5 times quickly, confirming successful pairing.

Mufananidzo: Rear view of the remote control highlighting the P2 button used for pairing.

6. Operating Instructions

The remote control features intuitive buttons for controlling your connected devices.

Mufananidzo: Mberi view of the 15-channel remote control, showing the LCD display and control buttons.

6.1 Basic Control Functions

• Museve Wekumusoro (▲): Press to open or raise the connected device (e.g., curtain, roller shutter).
• Museve Wakananga Pasi (▼): Press to close or lower the connected device.
• Stop Button (−): Press to stop the movement of the connected device at any point.

6.2 Channel Selection (for 2-channel and 15-channel models)

For multi-channel remotes, you can select which device to control:

1. Use the left (<) uye chokwadi (>) arrow buttons to cycle through the available channels.
2. The selected channel number will be displayed on the LCD screen (for 15-channel model).
3. Once the desired channel is selected, use the Up, Down, and Stop buttons to control the corresponding device.

7. Kuchengeta

• Kuchenesa: Pukuta remote control nejira rakapfava, rakaoma. Usashandise zvinochenesa zvinogumbura kana zvinonyungudutsa.
• Kutsiviwa kwebhatiri: If the remote control's performance degrades or the display becomes dim, replace the AAA batteries as described in Section 5.1. Dispose of old batteries responsibly.
• Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.

8. Kugadzirisa matambudziko

• Remote not responding to commands:
  - Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
  - Ensure the remote is within the effective control distance (50-100m in open areas) and there are no major obstructions.
• Motor not responding to remote control:
  - Verify that the motor is powered on.
  - Confirm that the remote control is correctly paired with the motor (refer to Section 5.3). If unsure, try re-pairing the remote.
  - Ensure you have selected the correct channel on the remote for the specific motor you wish to control.
• Cannot copy another remote control:
  - This remote control is a learning code remote and is designed to be paired directly with compatible motors. It does not have the functionality to copy signals from other remote controls.

9. Mazano emushandisi

• For optimal performance, ensure the remote control and the receiving motor are not obstructed by large metal objects or thick walls.
• If controlling multiple devices, clearly label your channels for quick identification.
• Remember that this remote is specifically designed for Dooya RF433 motors and similar systems. Compatibility with other brands like Somfy, Sarayroll, or Avosdim is not guaranteed unless explicitly stated by the manufacturer.

10. Warranty uye Tsigiro

Kune chero nyaya, rutsigiro rwehunyanzvi, kana zvichemo zvewaranti, ndapota taura nemutengesi kana mugadziri zvakananga. Chengeta risiti rako rekutenga seumboo hwekutenga.