Manuals+

CYCPLUS H2

CYCPLUS H2 Heart Rate Sensor Chest Strap User Manual

Muenzaniso: H2

1. Chigadzirwa Pamusoroview

The CYCPLUS H2 is a high-precision ECG heart rate sensor designed for sports and fitness activities. It features dual-mode ANT+ and Bluetooth connectivity, long battery life, and a waterproof design, making it suitable for various training environments.

CYCPLUS H2 Heart Rate Sensor module and strap
CYCPLUS H2 Heart Rate Sensor module and chest strap.
CYCPLUS H2 Heart Rate Chest Strap highlighting ECG algorithm, 500+ hour battery life, and IPX7 waterproof rating.
Key features of the H2 Heart Rate Chest Strap.

2. Setup Guide

2.1. Packing List

Ita shuwa kuti zvinhu zvese zviripo mupakeji:

  • HRM Sensor
  • Chest Strap
  • User Manual
  • Packing Bhokisi
Image showing the contents of the CYCPLUS H2 package: HRM sensor, chest strap, user manual, and packing box.
Contents of the H2 Heart Rate Sensor package.

2.2. Initial Setup and Battery Replacement

The H2 sensor uses a CR2032 battery. Follow these steps for initial setup or battery replacement:

  1. Slide the battery cover to unlock it, then open.
  2. If it's the first use, remove the battery insulation tab.
  3. Insert a new CR2032 battery into the battery compartment with the positive (+) side facing up.
  4. Confirm that the indicator light flashes, which indicates correct battery installation.
  5. Close the battery cover and slide it to lock securely.
Diagram illustrating how to open the battery cover, insert a CR2032 battery with the positive side up, and close the cover.
Battery installation and replacement steps.

2.3. Wearing the HRM Chest Strap

For accurate heart rate detection, proper wearing is crucial:

  1. To ensure optimal heart rate data detection, it is recommended to wet the electrode pads on the chest strap with water before each use.
  2. Install the HRM Sensor module onto the chest strap by snapping the connectors into place.
  3. Adjust the length of the chest strap to ensure it fits properly and snugly against your chest. The sensor should be positioned centrally on your chest.
Image showing a person wearing the CYCPLUS H2 heart rate sensor chest strap, demonstrating proper placement and the auto-wake up feature.
Proper placement of the H2 Heart Rate Sensor on the chest.

3. Operating Instructions

3.1. Activation and Connection

The HRM Sensor features an automatic activation system:

  • When both electrode pads of the chest strap make contact with your skin, the HRM Sensor will automatically activate. The indicator light will flash to show the current battery level.
  • The H2 supports both ANT+ and Bluetooth dual protocols. This allows it to connect to various devices such as bike computers, sports watches, and fitness apps to receive and display your heart rate data.
  • Note on Connectivity: When using the ANT+ protocol, the sensor can connect to multiple devices simultaneously. However, when using the Bluetooth protocol, it can only connect to one device at a time.
Diagram showing the CYCPLUS H2 sensor connecting to various ANT+ devices like Garmin watches and bike computers, and Bluetooth apps like XOSS, Wahoo, Strava, and Zwift.
H2 sensor supporting ANT+ and Bluetooth dual protocols for various devices and apps.

3.2. Chiratidzo Chiedza Mamiriro

The indicator light provides important information about the sensor's status:

  • The indicator light will turn on and flash for approximately 10 seconds in the following situations:
    • Each time the battery is correctly installed.
    • When the heart rate chest strap is properly worn and activated.
    • When the heart rate chest strap is taken off after use.
  • The color of the indicator light indicates the battery level:
    • Green light: Battery level i5% kana kupfuura.
    • Robhoti dzvuku Battery level iri pasi pe5%.

3.3. Sleep Mode and Power Off

The H2 sensor is designed for energy efficiency:

  • The HRM chest strap will automatically enter a low-power sleep mode after it is removed from your body. Before entering sleep mode, the indicator light will flash again to show the current battery level.
  • To completely power off the device, remove the HRM Sensor module from the chest strap.
Image illustrating the no-switch design of the CYCPLUS H2, showing automatic power on when attached to the chest strap and automatic power off when removed.
No-switch design for automatic power management.
Image showing a person after exercise, with text indicating the HRM chest strap automatically enters low-power sleep mode after removal.
Automatic sleep mode for power saving.

4. Kuchengetedza nekuchengetedza

Proper care ensures the longevity and accuracy of your H2 Heart Rate Sensor:

  • After each use, rinse the chest strap with clean water and hang it or lay it flat to dry.
  • If immediate washing is not possible, wipe any sweat from the electrode pads, connector, and the surface of the HRM Sensor after use. Separate the HRM Sensor from the chest strap and place them in a well-ventilated area. Clean and dry the chest strap as soon as possible.
  • For extended storage, it is recommended to remove the HRM Sensor module from the chest strap to maximize battery life.
  • Avoid overstretching the chest strap when wearing it to prevent damage to the electrode pads.
  • Sweat accumulation can affect data accuracy. Regularly rinse the chest strap with water after each use and hang it to dry.
  • Do not place a damp heart rate chest strap in airtight containers, as this may lead to oxidation of the connector, affecting measurement accuracy and shortening its lifespan.
  • Do not use chemical cleaners, as they may damage the strap and affect its measurement accuracy and lifespan.
  • Store the heart rate chest strap flat or hung after use, avoiding bending or rolling. Keep it out of direct sunlight for extended periods.
User wearing the CYCPLUS H2 heart rate sensor during exercise, demonstrating its IPX7 waterproof and dustproof capabilities against sweat and rain.
The H2 sensor is IPX7 waterproof and dustproof, suitable for various conditions.

5. Kugadzirisa matambudziko

If you encounter issues with your CYCPLUS H2 Heart Rate Sensor, consider the following:

  • No Heart Rate Data:
    • Ensure the electrode pads are wet and making firm, consistent contact with your skin.
    • Check if the battery is properly installed and has sufficient charge (refer to indicator light status). Replace the battery if it's low.
    • Verify that the sensor is correctly paired and connected to your receiving device (bike computer, sports watch, or app) via ANT+ or Bluetooth.
  • Kuverenga Kusina Kurongeka Kwemoyo:
    • Ensure the chest strap is worn snugly and is not moving during activity.
    • Clean the electrode pads and the sensor module to remove any sweat or residue that might interfere with signal transmission.
    • Avoid using chemical cleaners on the strap, as this can degrade its performance.
  • Matambudziko Ekubatanidza:
    • If connecting via Bluetooth, ensure no other device is currently connected to the H2 sensor, as it only supports one Bluetooth connection at a time.
    • Try restarting both the H2 sensor (by removing and reinserting the battery) and your receiving device.

6. Zvinotsanangurwa

FeatureDetail
ModelH2
Size70-95 * 3.0 * 0.9 cm
Weight (Device only)21g
Weight (Whole product)55g
Length of Chest Strap70-95 cm
Kukurukurirana ProtocolANT+, BLE (Bluetooth Low Energy)
Bhatiri TypeCR2032 200mAh
Kushandisa NguvaKusvikira kumaawa makumi maviri nemashanu
Kushanda Tembiricha0-50°C
Waterproof RatingIPX7
Table of CYCPLUS H2 specifications including size, weight, strap length, communication protocol, battery, usage time, working temperature, and waterproof rating.
Detailed specifications for the H2 Heart Rate Sensor.
Image highlighting the lightweight design of the CYCPLUS H2 sensor, stating the device is 21g and 9mm thick, with the whole product weighing 55g.
Lightweight design of the H2 sensor.

7. Mazano emushandisi

  • Ensure Electrode Contact: Always wet the electrode pads before wearing the chest strap. This significantly improves initial signal acquisition and overall accuracy, especially in dry conditions.
  • Garmin Compatibility: The CYCPLUS H2 is compatible with Garmin devices via ANT+. Ensure your Garmin device is set to search for ANT+ sensors.
  • Hupenyu hwebhatiri: To maximize the 500+ hour battery life, remember to remove the sensor module from the chest strap when not in use for extended periods. The sensor will automatically enter a low-power sleep mode when removed from the body, but full power-off occurs when detached from the strap.
  • Cleaning for Accuracy: Regular cleaning of the chest strap and sensor module is vital. Sweat and dirt can build up on the electrodes, leading to inaccurate readings. Rinse with water after each use.

8. Warranty uye Tsigiro

8.1. Mugadziri Ruzivo

Mugadziri: Chengdu Chendian Intelligent Technology Co., Ltd
Kero: No.88 Tianchen Road, Chengdu, Sichuan Province, China

8.2. Warranty Policy

The CYCPLUS H2 Heart Rate Sensor comes with a warranty for free repair or replacement within one year from the date of purchase.

8.3. After-Sales Support

For any after-sales inquiries or technical support, please contact us via email:

Email: steven@cycplus.com

For a detailed user manual in PDF format, please refer to the official documentation provided by CYCPLUS.


CYCPLUS H2 Mwoyo Mwero Monitor Chest Strap Kushandisa Dzidziso: Kuisa, Pairing & Kuchenesa Gwaro.

CYCPLUS H2 Mwoyo Mwero Monitor Chest Strap Kushandisa Dzidziso: Kuisa, Pairing & Kuchenesa Gwaro.

2:00 • 1280×720 • mirairo

Related Documents - H2

Preview CYCPLUS H2 Pro Mwoyo Mwero Chest Strap Mushandisi Manual
Comprehensive user manual for the CYCPLUS H2 Pro Heart Rate Chest Strap, covering setup, usage, maintenance, and troubleshooting for accurate heart rate monitoring during workouts.
Preview CYCPLUS GPS Bike Kombuta M2 Mushandisi Manual
Chinyorwa chemushandisi cheCYCPLUS GPS Bike Kombuta M2, inotsanangura maficha ayo, kuseta, mabasa, uye zvakatemwa. Dzidza maitiro ekubatanidza masensa, sync data nemaapps akaita seXOSS, Strava, uye TrainingPeaks, uye unzwisise kuratidzwa kwechishandiso uye mabhatani mashandiro.
Preview Cycplus M2 GPS Bike Computer Quick Start Guide
A comprehensive guide to setting up and using the Cycplus M2 GPS Bike Computer, including features, settings, and connectivity options.
Preview Bhuku rekushandisa pakombiyuta yeCycplus M2 GPS Cycling
Bhuku rekushandisa rakakwana reCycplus M2 GPS cycling computer, rinosanganisira setup, mashandisirwo, marongero, kubatana nemaapplication akaita seXOSS neStrava, uye ruzivo rwekuchengetedza.
Preview CYCPLUS GPS Bike Kombuta M2 Mushandisi Manual
User manual for the CYCPLUS GPS Bike Computer M2, detailing its features, setup, operation, and maintenance.
Preview CYCPLUS GPS Bike Kombuta M3 Mushandisi Manual
User manual for the CYCPLUS M3 GPS Bike Computer, detailing its features, specifications, button functions, data display, settings, and installation.