Nhanganyaya
Thank you for choosing the CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack. This versatile 3-in-1 device combines a powerful jump starter, a rapid USB charger, and a multi-mode LED light, designed for convenience and reliability. This manual provides essential information for the safe and effective use of your device.
Figure 1: CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack with included accessories.
Ruzivo Rwakakosha Chekuchengetedza
WARNING: Read the entire instruction manual before using this product to prevent serious injury or damage.
- Do not use this product if it is damaged, wet, or not fully charged.
- Do not attempt to jump start a frozen, severely discharged, or damaged battery.
- Avoid using the product if the battery is leaking, hot, swollen, discolored, corroded, or emitting any unusual sounds or odors.
- Iva nechokwadi chekuti mhepo inofefetera zvakanaka paunenge uchishanda.
- Chengetedza pasingasvikirwi nevana.
- Consult a medical professional if you have a pacemaker or other medical device before use.
Figure 2: Back of the device with quick instructions and safety warnings.
Package Zviri mukati
Ona kuti zvinhu zvese zviripo mupasuru yako:
- (1) CRAFTSMAN CMXCESM262 Lithium Jump Starter and Portable Power Pack
- (1) 12V DC Car Charger
- (1) USB-C Kuchaja Cable
- (1) Carrying Case with Built-in Cable Storage
- (1) User Manual (this document)
Setup uye Yekutanga Kuchaja
Kutanga Charge
Before first use, fully charge the jump starter. It is recommended to fully charge the unit after each use and every 3-6 months when not in use to maintain battery health.
- Using 12V DC Car Charger: Connect the 12V DC car charger to the jump starter and then to your vehicle's 12V accessory outlet. Charging time is approximately 4 hours.
- Using USB-C Charging Cable: Connect the USB-C cable to the jump starter and a compatible USB power adapter (not included). Charging time is approximately 7-8 hours.
The battery indicator lights on the device will show the charging progress and current battery level.
Operating Instruction
Svetuka Kutanga Mota
The CMXCESM262 is designed to jump start vehicles with up to 10.0L gas engines and 8.0L diesel engines. It is compatible with standard, AGM, gel, and deep-cycle batteries.
- Batanidza: Ensure the jump starter is sufficiently charged. Connect the red clamp kune terminal yakanaka (+) yebhatiri remotokari uye cl nhemaamp to a metal part of the vehicle's chassis (away from the battery and fuel lines) or the negative (-) terminal if safe to do so.
- Tanga: Turn on the jump starter. Attempt to start the vehicle. If the vehicle does not start immediately, wait a few minutes and try again. The device features Schumacher’s Pre-Heating Technology for reliable starts in freezing temperatures and Pre-Boost for deeply discharged batteries.
- Bvisa: Kana mota yangotanga, bvisa dema dema ipapo ipapoamp, wobva waona cl tsvukuamp, from the vehicle.
Figure 3: Engine compatibility chart for gasoline and diesel vehicles.
Using as a Portable Power Pack (USB Charger)
The device includes a 2.4A USB port for charging smartphones and other USB-powered devices. This port delivers ultra-fast charging, up to 2x faster than standard USB ports.
- Connect your device's USB charging cable to the jump starter's USB port.
- The jump starter can provide power for up to 50 jump starts on a single charge, or extended use as a power bank.
Kushandisa Chiedza che LED
The built-in LED light offers three modes for various situations:
- Yakatsiga: For general illumination.
- Flashing (SOS): Yechimbichimbi chiratidzo.
- Strobe: For attracting attention.
To cycle through the modes, press the light button repeatedly.
Figure 4: The 3-in-1 multifunctional power source with LED light activated.
Maintenance
- Recharging: Always recharge the unit after each use. For optimal battery life, recharge every 3-6 months even when not in use.
- Kuchenesa: Keep the unit clean and free from dirt, dust, and moisture. Use a dry cloth to wipe the exterior.
- Kuchengeta: Store the jump starter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. The device is designed to work in extreme temperatures from -4°F to 140°F (-20°C to 60°C), but storage in moderate conditions is recommended for longevity.
Figure 5: The jump starter is designed for reliable operation in a wide range of temperatures.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Unit haibatike. | Bhatiri rapera. | Recharge the unit fully using either the 12V DC car charger or USB-C cable. |
| Motokari haisvetuka-svetuka. | Incorrect connection; Vehicle battery too damaged/frozen; Unit not fully charged; Engine size exceeds capacity. | Simbisa clamps are correctly connected (red to positive, black to chassis/negative). Check unit's charge level. Refer to engine compatibility chart. Do not attempt to jump start frozen or severely damaged batteries. |
| Chishandiso cheUSB hachisi kuchaja. | USB cable faulty; Unit battery depleted; USB device incompatible. | Try a different USB cable. Recharge the jump starter. Ensure your device is compatible with standard USB charging. |
| Chiedza che LED hachishande. | Unit battery depleted; Light function not activated. | Recharge the unit. Press the light button to activate and cycle through modes. |
| Unit is hot, swollen, or emitting odor. | Internal battery issue. | Immediately discontinue use and contact customer support. Do NOT attempt to repair. |
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model | CMXCESM262 |
| Peak Ampage | 2500 Amps |
| Voltage | 12 Volts |
| Bhatiri Type | Lithium Ion |
| Battery Capacity | 13400 mamiriyoniamp Maawa |
| Kuenderana kweInjini (Gasi) | Kusvika ku10.0L |
| Kuenderana Kweinjini (Diesel) | Kusvika ku8.0L |
| USB Output | 2.4A |
| Operating Temperature | -4°F kusvika 140°F (-20°C kusvika 60°C) |
| Zviyero (D x W x H) | 3.8 x 6 x 9.3 inches |
| Item Weight | 2.3 Pondo |
| Charging Time (12V DC) | Approx. 4 maawa |
| Nguva yekuchaja (USB-C) | Approx. 7-8 maawa |
Mazano Ekushandisa
- Always ensure the jump starter is fully charged before heading out, especially for long trips or in cold weather.
- Chengeta clamps clean and free of corrosion for optimal conductivity.
- When jump starting, connect the clamps firmly to ensure a good connection.
- Utilize the LED light's SOS or strobe mode in emergency situations to enhance visibility.
- Store the unit in its protective case to prevent damage.
Warranty uye Support
For warranty information, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. If you encounter any issues not covered in this manual, or require further assistance, please contact CRAFTSMAN customer support.
Manufacturer: CRAFTSMAN
Model: CMXCESM262
