Radio Shack Plug' n Power Home Security System User Manual

1. Chigadzirwa Pamusoroview

The Radio Shack Plug' n Power Home Security System is a wireless, easy-to-install solution designed to provide peace of mind for your home, apartment, or condo. This system eliminates the need for complex wiring and drilling, utilizing your home's existing AC wiring for signal transmission. It includes a central control console, wireless door/window sensors, a motion detector, and a convenient keychain remote control.

Figure 1: The main control console of the Radio Shack Plug' n Power Home Security System.

2. Package Zviri mukati

Ndokumbira utarise kuti zvese zvinotevera zvinosanganisirwa pasuru yako:

• 1 x Control Console
• 2 x Wireless Door/Window Sensors
• 1 x Motion Detector
• 1 x Keychain Remote Control
• 2 x CR2016 Lithium Batteries (for Keychain Remote)

Cherechedza: Additional batteries are required and not included: 4 x "AAA" batteries (for Motion Detector) and 6 x "AA" batteries (for Door/Window Sensors).

3. Key Features

• Wireless Operation: No complex wiring or drilling required for sensors and remote.
• AC Wiring Communication: Main remote control station uses existing home AC wiring for signal transmission.
• Two Wireless Door/Window Sensors: Automatically send signals to the control console upon breach.
• Motion Detector: Triggers an alarm when motion is detected within its range.
• Keychain Remote: Conveniently arm or disarm the system from anywhere around your home.
• Full-Function Control Console: Arms, disarms, and can control up to four modules.
• Yakavakirwa-mukati Maikorofoni: Allows a contacted person to listen to the room through the system.

4. Setup Guide

4.1. Powering the Control Console

1. Plug the Control Console into a standard AC electrical outlet.
2. Connect the provided phone cord from the Control Console to a telephone wall jack.

4.2. Kuisa Mabhatiri

Iva nechokwadi chepolar chaiyo paunenge uchiisa mabhatiri.

• Keychain Remote: The two CR2016 lithium batteries are pre-installed. If replacement is needed, refer to the Maintenance section.
• Motion Detector: Insert 4 "AAA" batteries into the battery compartment.
• MaSensor eMusuwo/Mahwindo: Insert 3 "AA" batteries into each sensor's battery compartment (total 6 "AA" batteries for two sensors).

4.3. Sensor Placement

• MaSensor eMusuwo/Mahwindo: Mount one part of the sensor on the door/window frame and the other part on the door/window itself, ensuring they are aligned and close to each other when the door/window is closed.
• Motion Detector: Place the motion detector in a corner or high vantage point in the room you wish to monitor, ensuring it has a clear line of sight to the area. Avoid placing it near heat sources or direct sunlight.

5. Operating Instructions

5.1. Arming the System

To activate the security system:

• Kushandisa Control Console: Press the 'ARM' button on the console. The system will emit a confirmation tone, and the status indicator will change.
• Using the Keychain Remote: Press the 'ARM' button on the keychain remote. The system will confirm arming with a tone.

5.2. Disarming the System

To deactivate the security system:

• Kushandisa Control Console: Enter your disarm code (if set up) or press the 'DISARM' button. The system will emit a confirmation tone.
• Using the Keychain Remote: Press the 'DISARM' button on the keychain remote. The system will confirm disarming with a tone.

5.3. Zvinhu zveKutarisa

The system includes a built-in microphone. If the system contacts a pre-programmed number during an alarm, the person on the other end can listen to the sounds in the room where the control console is located.

6. Kuchengeta

6.1. Kutsiviwa kwebhatiri

Replace batteries promptly when low battery indicators appear or system performance degrades.

• Keychain Remote: Replace with 2 x CR2016 lithium batteries.
• Motion Detector: Replace with 4 x "AAA" batteries.
• MaSensor eMusuwo/Mahwindo: Replace with 3 x "AA" batteries per sensor.

Gara uchirasa mabhatiri akamboshandiswa zvine mwero zvichienderana nemitemo yemuno.

6.2. Kuchenesa

Wipe the surfaces of the control console and sensors with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the components.

7. Kugadzirisa matambudziko

If you encounter issues with your security system, refer to the following common problems and solutions:

• Sistimu haina ruoko / kubvisa zvombo:
  • Check if the control console is properly plugged into an AC outlet.
  • Ensure all sensors have fresh batteries and are correctly installed.
  • Verify that the keychain remote batteries are not depleted.
• Sensor isingakonzere alarm:
  • Check sensor battery levels.
  • Ensure door/window sensors are properly aligned and within range of the control console.
  • Verify the motion detector's placement and ensure no obstructions are blocking its field of view.
• No sound from control console:
  • Tarisa simba rekubatanidza.
  • Ensure volume settings (if applicable) are not muted or too low.

For persistent issues not covered here, please contact customer support.

8. Zvinyorwa zveUnyanzvi

9. Warranty uye Tsigiro

For warranty information or technical support regarding your Radio Shack Plug' n Power Home Security System, please refer to the documentation included with your purchase or visit the official RadioShack website for customer service contact details. Keep your proof of purchase for warranty claims.