Nhanganyaya
This manual provides instructions for the installation, operation, and maintenance of the Linear Multi-Code Keypad Transmitter, model 420001. This wireless keypad is designed for use with Multi-Code Receivers to control access to garage doors or gates.
Product Overview
The Linear Multi-Code Keypad Transmitter 420001 is a 12-button alphanumeric keypad. It operates on a 300 MHz frequency and features 10 dip switches for programming. Its weatherproof casing inoita kuti igare kwenguva refu pakushandiswa panze.
Mufananidzo: Mberi view of the Linear Multi-Code Keypad Transmitter 420001, showing the 12-button alphanumeric keypad and the "MULTI-CODE" branding at the top.
Setup uye Installation
Kuiswa kweBattery
The keypad requires one 9V alkaline battery (not included). To install:
- Open the keypad casing.
- Batanidza bhatiri re9V nebhatiri rekubatanidza.
- Place the battery securely within the compartment.
- Close the keypad casing, ensuring it is sealed properly for weather resistance.
Mounting
The keypad is designed for screw-in installation and mounts with two screws.
- Choose a suitable location for mounting, ensuring it is within range of your Multi-Code Receiver.
- Mark the positions for the two mounting screws.
- Dhonza maburi ekutyaira kana zvichidikanwa.
- Secure the keypad to the surface using appropriate screws.
Kugadzirisa Keypad
This keypad uses 10 dip switches for programming. The code is entered directly through the keypad, eliminating the need to manually adjust physical dip switches on the unit itself.
- Locate the dip switch settings on your Multi-Code Receiver or existing remote. This will be a sequence of 10 switches, each set to ON, OFF, or MIDDLE (if applicable).
- On the 420001 keypad, enter the 10-digit code corresponding to your receiver's dip switch settings. Refer to the keypad's internal instructions for specific key presses to represent ON, OFF, or MIDDLE positions.
- Press the "ACCESS" button to save the code.
- Test the keypad to ensure it operates your garage door or gate opener.
Cherechedza: Programming typically takes less than 2 minutes. Ensure the keypad is within operational range of the receiver during testing.
Operating Instruction
To operate your garage door or gate using the Linear Multi-Code Keypad Transmitter:
- Enter your programmed 10-digit access code using the alphanumeric buttons.
- Press the "ACCESS" button.
- The LED indicator will illuminate, and your Multi-Code Receiver should activate, opening or closing your garage door or gate.
If the door or gate does not respond, verify your code and ensure the keypad is within effective range of the receiver.
Maintenance
- Kutsiva Bhatiri: When the keypad's performance degrades or the LED indicator fails to light, replace the 9V battery. Follow the battery installation steps.
- Kuchenesa: Clean the keypad's exterior with a soft, damp jira. Dzivisa abrasive cleaners kana solvents.
- Weather Resistance: The keypad features a weatherproof casing. Ensure the casing is properly closed and sealed after any internal access (e.g., battery replacement) to maintain its weather-resistant properties.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Keypad does not respond or works intermittently. |
|
|
| Chiratidzo che LED hachivheneke. | Rafa kana kuisirwa zvisina kunaka bhatiri. | Check battery connection or replace the 9V battery. |
| Keypad does not program correctly. | Incorrect dip switch settings entered. | Double-check the 10 dip switch settings from your receiver and re-enter the code carefully. |
Zvinotsanangurwa
| Model Number | 420001 |
| Brand | Linear |
| Frequency | 300 MHz |
| Number of Dip Switches | 10 |
| Simba Source | 1 x 9V Alkaline Battery (haisipo) |
| Installation Type | Screw-In |
| Product Dimensions | 6.75 x 1.5 x 3 inches |
| Item Weight | 4 ounces |
| Material | Plastiki |
| Color | Beige |
| Kuteerera | FCC |
Warranty uye Support
Kuti uwane ruzivo rwewarandi kana rutsigiro rwehunyanzvi, ndapota tarisa kune mukuru wemugadziri websaiti kana kubata dhipatimendi ravo rebasa revatengi. Chengeta risiti yako yekutenga yezvichemo zvewaranti.
Mugadziri: Linear
