TITAN 1/2 HP Mid-Duty Garbage Disposal System

Model: 10-US-TN-760-3B

Nhanganyaya

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new TITAN 1/2 HP Mid-Duty Food Waste Disposer. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.

Safety Information

YAMBIRO: Improper installation or operation can lead to personal injury or property damage. Always disconnect power before servicing or installing the unit.

Verenga mirayiridzo yose zvakakwana usati waisa uye kushandisa.
Pfeka magirazi ekuchengetedza panguva yekuisa.
Iva nechokwadi chekuti magetsi abviswa pa circuit breaker usati waisa kana kugadzirisa.
Do not insert hands or foreign objects into the disposal opening.
Always run cold water when operating the disposal.

Setup uye Installation

The TITAN 1/2 HP Mid-Duty Food Waste Disposer features a standard 3-bolt mounting system for straightforward installation and replacement. It is designed to replace most garbage disposal brands using similar 3-bolt mounting systems.

Zvinosanganisirwa Zvikamu:

Food Waste Disposer Unit
Inobviswa Splash Guard
Stainless Sink Sink Flange
Stopper
Power Cord (yakabatanidzwa)
Drain Outlet Elbow and Elbow Screws
Elbow Flange

Kuisa Matanho:

Prepare Sink Opening: Ensure the sink opening is clean and free of debris. If replacing an old disposal, remove the existing unit and mounting assembly.
Install Sink Flange: Apply plumber's putty around the underside of the stainless steel sink flange and press it firmly into the sink drain opening.
Assemble Mounting Ring: From underneath the sink, slide the fiber gasket, backup flange, and mounting ring onto the sink flange. Secure with the snap ring. Tighten the three mounting screws evenly to create a watertight seal.
Connect Dishwasher Drain (if applicable): If connecting a dishwasher, remove the knockout plug from the dishwasher inlet on the disposal unit. Secure the dishwasher hose to the inlet using a hose clamp.
Attach Disposal Unit: Align the three mounting tabs on the disposal unit with the mounting ring. Lift and twist the disposal unit clockwise until it locks into place. Use pliers or a specialized wrench to ensure a secure lock.
Connect Drain Plumbing: Attach the drain outlet elbow to the disposal unit using the provided elbow flange and screws. Connect the elbow to your existing household drain plumbing. Ensure all connections are tight to prevent leaks.
Batanidza Simba: The unit comes with an attached 120V power cord. Plug the disposal into a grounded outlet.
Test for Leaks: Run cold water into the sink and check all connections for leaks.

Diagram of TITAN garbage disposal with labeled components: 3-Bolt Mounting System, 7/8 inch Dishwasher Connection Inlet, Outlet Elbow Connection, Front Reset Button, 1/2 HP 2600 RPM, and Torque Master Balanced Grinding System.

Figure 1: TITAN Garbage Disposal with Labeled Components

Individual components of the TITAN garbage disposal: Elbow Screws, Drain Outlet Elbow, Elbow Flange, Plastic Stopper, and Removable Splash Guard.

Figure 2: Included Installation Components

TITAN garbage disposal installed under a kitchen sink, showing plumbing connections and power cord plugged into an outlet.

Figure 3: Typical Under-Sink Installation

Operating Instruction

The TITAN garbage disposal is a continuous feed unit, allowing food waste to be added while it is running.

Turn on the cold water faucet to a moderate flow.
Flip the disposal switch to the ON position.
Scrape food waste into the disposal opening. The Torque Master grinding system, with its stainless steel impellers, efficiently grinds coffee grounds, vegetable scraps, peelings, and small bones into fine particles.
Rega nzvimbo yekurasira ishande kusvika marara ese ezvekudya abviswa uye ruzha rwemvura nemota chete zvanzwika.
Turn off the disposal, then turn off the cold water after a few seconds to flush the drain line.

Maintenance

Regular maintenance ensures optimal performance and longevity of your garbage disposal.

Kuchenesa: The removable rubber splash guard baffle can be easily removed for cleaning. Clean it regularly to prevent odor buildup.
Kudzora Kunhuwa: To help control odors, grind citrus peels (lemon, orange) or a small amount of ice cubes with cold water.
Avoid Grease: Do not pour grease or oil down the disposal, as it can solidify and clog pipes.

Kugadzirisa matambudziko

If your disposal is not operating correctly, refer to the following common issues and solutions:

Disposal Not Starting:
a. Check if the unit is plugged in securely.
b. Press the red reset button located on the front bottom of the disposal unit (see Figure 1).
c. Check your household circuit breaker.
Humming but Not Grinding:
a. This indicates an object is jammed in the grinding chamber. Turn off the disposal and disconnect power.
b. Use a flashlight to look into the drain opening. If an object is visible, remove it with tongs or pliers. Never use your hand.
c. If no object is visible, use the provided hex wrench (or a 1/4 inch hex wrench) to insert into the center hole on the bottom of the disposal and turn it back and forth to free the impellers.
Kubvinza:
a. Check all plumbing connections for tightness.
b. Inspect the sink flange for proper sealing; re-tighten mounting screws if necessary.

Zvinotsanangurwa

Feature	Tsanangudzo
Model Number	10-US-TN-760-3B
Motor Horsepower	1 / 2 HP
Motor Speed	2600 RPM
Grinding Components	Stainless Steel Impellers
Kukwira System	3-Bolt
Voltage	120 Volts
Zviyero zveChigadzirwa (L x W x H)	7.2 x 7.2 x 14.6 inches
Item Weight	11.13 makirogiramu
Material	Simbi isina ngura

Diagram showing the dimensions of the TITAN garbage disposal: 12.9 inches height, 7 inches width, 6.3 inches top diameter, and 4.5 inches bottom diameter.

Mufananidzo 4: Zviyero zvechigadzirwa

Warranty

The TITAN 1/2 HP Mid-Duty Garbage Disposal System comes with a 5-Yegore Warranty. During the warranty period, a defective or inoperative disposer will be replaced by the manufacturer at no charge to the consumer/purchaser. An original sales receipt is required for warranty claims. Costs of service labor for installation will be the consumer’s responsibility.

Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact TITAN customer support. Refer to your product packaging or the official TITAN websaiti yeruzivo rwazvino.

	Titan 1785 Smartwatch Mushandisi Manual: Setup, Zvimiro, uye Zvinotsanangurwa Tanga neTitan 1785 smartwatch yako. Iri rakazara remushandisi bhuku rinovhara kuseta, pairing, akakosha maficha senge chiitiko chekutevera uye zviziviso, zvakatemwa zvechigadzirwa, uye yakakosha ruzivo rwekuchengetedza.
	Titan Heavy-Duty Workbench Assembly Manual - Muenzaniso 85095 Yepamutemo gungano bhuku reTitan Heavy-Duty Workbench (Modhi 85095). Inosanganisira hardware list, mirairo yekuchengetedza, nhanho-ne-nhanho mirayiridzo yegungano, uye mazano ekugadzirisa.
	TITAN 85095 Ultra-Robust Workbench Assembly Manual Mirayiridzo yekubatanidza uye ruzivo rwekuchengetedza bhenji rebasa reTITAN 85095 Ultra-Robust. Dzidza kugadzira nekugadzirisa bhenji rako rebasa rinorema.
	Titan RX-Pro Airless Spray Pfuti Muridzi Chinyorwa Iri bhuku remuridzi rinopa akakosha ekuchengetedza, mirairo yekumisikidza, maitiro ekushanda, nhungamiro yekugadzirisa, uye ruzivo rwewaranti yeTitan RX-Pro Airless Spray Gun.
	Bhuku rekushandisa reTitan TTL684BVC 27.6cc Petrol Blower Vacuum Bhuku rekushandisa reTitan TTL684BVC 27.6cc Petrol Blower Vacuum. Rine yambiro dzakakosha dzekuchengetedza, mirairo yekushandisa, nhungamiro dzekugadzirisa, uye mazano ekugadzirisa matambudziko ekushandisa zvakachengeteka uye zvinobudirira.
	Mirayiridzo yekushanda kweTitan Pro - Acro 3D Massage Chair Mirayiridzo yakakwana yekushanda kweTitan Pro - Acro 3D Massage Chair, inosanganisira kuchengetedzeka, zvikamu, mashandiro, kushandiswa kweremote controller, uye kugadzirisa kuti ishande zvakanaka uye kuchengetedzeka kwemushandisi.

TITAN 10-US-TN-760-3B