Bhuku rekushandisa reEinhell BT-TJ 2250 Trolley Jack

1. Nhanganyaya

This manual provides important information for the safe and proper operation, maintenance, and troubleshooting of your Einhell BT-TJ 2250 Trolley Jack. Please read this manual thoroughly before using the product and keep it for future reference.

The Einhell BT-TJ 2250 is a robust and stable trolley jack designed for lifting vehicles with a maximum load capacity of 2250 kg. It features two ball-bearing swivel castors for easy maneuverability, an extra-large support saddle, and a long, two-part lifting rod to ensure safe and easy lifting of loads. An integrated safety valve protects against overloading.

2. Mirayiridzo Yekuchengetedza

Gara uchicherechedza zvinotevera kuchengetedza kudzivirira kukuvara kana kukuvara kuchigadzirwa:

• Verenga Manual: Before operation, read and understand all instructions and warnings in this manual.
• Load Capacity: Usambofa wakapfuudza huwandu hwekuremedza huwandu hwe2250 kg.
• Stable Surface: Nguva dzose shandisa jack pane yakaoma, nhanho, uye yakagadzikana pamusoro.
• Rutsigiro rweMotokari: After lifting, always support the vehicle with appropriate jack stands before working underneath it. Never rely solely on the jack for support.
• Center Load: Ensure the load is centered on the saddle of the jack.
• Clear Area: Keep hands, feet, and other body parts clear of moving parts and the area under the load.
• Maintenance: Gara uchiongorora jeko kana kukuvara kana kupfeka. Usashandise kana wakuvadzwa.
• Vana uye Zvipfuwo: Chengetedza vana nezvipfuyo kure nenzvimbo yebasa.
• Overload Protection: The jack is equipped with an overload safety valve. Do not attempt to bypass or adjust this valve.

3. Zvigadzirwa zveChigadzirwa

Familiarize yourself with the parts of your Einhell BT-TJ 2250 Trolley Jack:

1. Main Body: The robust steel frame of the jack.
2. Kusimudza Arm: The movable arm that raises the support saddle.
3. Support Saddle: The circular pad at the top of the lifting arm where the load rests. It is extra-large for stability.
4. Swivel Castors: Two ball-bearing wheels at the rear for easy steering and positioning.
5. Fixed Wheels: Two wheels at the front for stability.
6. Lifting Rod (Handle): A two-part rod used to pump the jack and operate the release valve.
7. Kusunungura Valve: Located at the base of the lifting mechanism, controlled by rotating the lifting rod.
8. Overload Safety Valve: Internal mechanism to prevent lifting beyond the rated capacity.

4. Setup uye Gungano

The Einhell BT-TJ 2250 Trolley Jack typically comes pre-assembled, but the lifting rod may need to be attached.

• Attach the Lifting Rod: Insert the two parts of the lifting rod together. Then, insert the assembled rod into the handle socket on the jack. Ensure it is securely seated.
• Bleed Air (First Use): Before first use, it is recommended to bleed any air from the hydraulic system.
  1. Turn the lifting rod counter-clockwise to fully open the release valve.
  2. Pump the lifting rod vigorously several times.
  3. Turn the lifting rod clockwise to close the release valve.

5. Operating Instructions

5.1. Kusimudza Mutoro

1. Gadzirira Motokari: Park the vehicle on a hard, level surface. Engage the parking brake and block the wheels that will remain on the ground.
2. Isa Jack: Locate the vehicle's designated lifting points (refer to your vehicle's owner's manual). Position the jack's support saddle directly under the lifting point.
3. Close the Release Valve: Turn the lifting rod clockwise until the release valve is fully closed. Do not overtighten.
4. Simudza Mutoro: Pump the lifting rod up and down to raise the support saddle and lift the vehicle. Continue pumping until the vehicle reaches the desired height.
5. Chengetedza neJack Stands: Immediately place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands by carefully turning the lifting rod counter-clockwise. Once the vehicle is securely resting on the jack stands, remove the trolley jack.

5.2. Kudzikisa Mutoro

If the vehicle is on jack stands, first lift it slightly off the stands using the trolley jack before lowering.

1. Bvisa Nzvimbo: Ensure no one is under or near the vehicle.
2. Isa Jack: If removed, reposition the jack's support saddle under the lifting point.
3. Zvishoma nezvishoma Vhura Kuburitsa Varuvha: Slowly and carefully turn the lifting rod counter-clockwise to open the release valve. The vehicle will begin to descend. Control the descent speed by adjusting how much you open the valve.
4. Fully Lower: Continue lowering until the vehicle is fully on the ground.
5. Bvisa Jack: Once the vehicle is stable on the ground, remove the trolley jack.

6. Kuchengetedza nekuchengetedza

• Kuchenesa: Clean the jack regularly with a damp jira. Usashandise makemikari ane hutsinye.
• Lubrication: Periodically lubricate moving parts and pivot points with light machine oil.
• Hydraulic Oiri: Check the hydraulic oil level periodically. If low, refill with a high-quality hydraulic jack oil. Consult a qualified technician if unsure.
• Kuongorora: Usati washandisa, tarisa jeki kana paine zviratidzo zvekukuvadzwa, kubuda kwemvura, kana kusakara. Usashandise jeki yakakuvara.
• Kuchengeta: Store the jack in a dry, clean place, preferably with the ram fully retracted to protect the hydraulic cylinder.

7. Kugadzirisa matambudziko

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

For warranty information, please refer to the warranty card included with your product or visit the official Einhell website. For technical support or spare parts, please contact Einhell customer service. Keep your purchase receipt as proof of purchase.

Einhell Customer Service: Please refer to the contact details provided on the Einhell official websaiti kana mune yako chigadzirwa kurongedza.