HAZET 6290-1CT/29 Torque Tool Assortment User Manual

1. Nhanganyaya

This manual provides detailed instructions for the proper operation, maintenance, and care of your HAZET 6290-1CT/29 Torque Tool Assortment. Please read this manual thoroughly before using the tools to ensure safe and efficient operation and to prevent damage to the tools or the workpiece.

2. Safety Information

Always observe the following safety precautions when using the HAZET 6290-1CT/29 Torque Tool Assortment:

• Wear appropriate personal protective equipment (PPE), such as safety glasses, to protect against potential hazards.
• Ita shuwa kuti workpiece yakachengeteka clamped or supported before applying torque.
• Do not exceed the maximum torque capacity of the tool. Refer to the specifications section for details.
• Do not use the torque wrench as a standard ratchet or for breaking loose fasteners. It is a precision measuring instrument.
• Chengeta chishandiso chakachena uye chisina mafuta, mafuta, kana zvimwe zvinosvibisa zvinogona kukanganisa kubata kana kururama.
• Store the torque wrench in its protective case when not in use to prevent damage.
• Regularly inspect the tool for any signs of wear or damage. Do not use a damaged tool.

3. Chigadzirwa Pamusoroview

The HAZET 6290-1CT/29 Torque Tool Assortment includes a precision torque wrench and a comprehensive set of interchangeable open-end and box-end attachments, designed for accurate torque application in various settings.

Mufananidzo 3.1: The complete HAZET 6290-1CT/29 Torque Tool Assortment, showcasing the torque wrench and 28 interchangeable attachments neatly organized in a durable blue case.

3.1 Zvikamu

• HAZET 6290-1CT Torque Wrench: A mechanical torque wrench with a specified torque range of 5-60 Nm.
• Zvinochinjika Zvakanamirwa: A set of 28 various open-end and box-end attachments for different fastener sizes.
• Protective case: A robust case for organized storage and transport of the tools.

Mufananidzo 3.2: A akadzama view of the HAZET 6290-1CT torque wrench, highlighting its adjustment scale and ergonomic handle.

Mufananidzo 3.3: An internal cutaway diagram of the HAZET 6290-1CT torque wrench, illustrating the precision mechanical components responsible for accurate torque measurement and click mechanism.

4. Setup uye Kugadzirira

4.1 Selecting an Attachment

Choose the appropriate open-end or box-end attachment from the assortment that matches the size of the fastener you intend to tighten. Ensure the attachment fits securely onto the torque wrench's square drive.

4.2 Setting the Torque Value

1. Unlock the adjustment mechanism, typically by pulling down or rotating a collar at the base of the handle.
2. Rotate the handle to align the desired torque value on the main scale with the zero mark on the micrometer scale.
3. Fine-tune the setting by rotating the handle further until the exact desired value is aligned on the micrometer scale.
4. Lock the adjustment mechanism to prevent accidental changes during use.

Note: Always refer to the specific torque requirements for your application.

5. Operating Instructions

5.1 Kushandisa Torque

1. Attach the selected head to the torque wrench.
2. Place the attachment onto the fastener, ensuring a firm and square engagement.
3. Apply steady, increasing force to the handle in a smooth motion. Avoid jerky movements.
4. Continue applying force until a distinct "click" is felt and heard. This indicates that the preset torque value has been reached.
5. Immediately stop applying force once the click is detected. Do not overtighten.
6. Remove the torque wrench from the fastener.

Mufananidzo 5.1: Demonstrating the HAZET torque wrench in use, applying precise torque to a fastener within an engine compartment.

Important: After use, always reset the torque wrench to its lowest setting (but not below the minimum) before storing. This relieves tension on the internal spring and helps maintain calibration accuracy over time.

6. Kuchengetedza nekuchengetedza

6.1 Kuchenesa

Wipe the torque wrench and attachments clean with a soft, dry cloth after each use. If necessary, use a mild, non-abrasive cleaner. Do not immerse the tool in liquids.

6.2 Kuchengeta

Store the HAZET 6290-1CT/29 Torque Tool Assortment in its original protective case in a dry, clean environment, away from extreme temperatures and humidity. Ensure the torque wrench is set to its lowest torque value before storage to preserve spring tension.

6.3 Calibration

Torque wrenches are precision instruments that require periodic calibration to maintain accuracy. HAZET recommends professional calibration at regular intervals, typically annually or after 5,000 cycles, whichever comes first. Refer to HAZET's official guidelines for specific recommendations.

7. Kugadzirisa matambudziko

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

HAZET products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official HAZET website. For technical support, service, or calibration inquiries, please contact HAZET customer service through their official channels.

Official HAZET Websaiti: www.hazet.de