Apollo Valve 13-213 Series Bronze Safety Relief Valve User Manual

1. Chigadzirwa Pamusoroview

This manual provides essential information for the safe and effective use of the Apollo Valve 13-213 Series Bronze Safety Relief Valve. This valve is designed for protecting small to medium low-pressure steam heating boilers by removing excess pressure from the system.

Zvinhu zvakakosha zvinosanganisira:

Relief pressure preset of 15 psi for releasing excess pressure.
1-1/4" male NPT threaded inlet for connecting to a female NPT threaded connection.
Cast bronze body and steel spring for corrosion resistance.
Flat seat, PTFE-faced disc for positive seal.
ASME safety rated for Section IV heating boilers.

Apollo Valve 13-213 Series Bronze Safety Relief Valve, front view

Mufananidzo 1: Mberi view of the Apollo Valve 13-213 Series Bronze Safety Relief Valve, showing the bronze body, NPT connections, and the pressure relief lever.

2. Safety Information

Always adhere to local codes and regulations when installing and operating pressure relief devices. Improper installation or maintenance can lead to serious injury or property damage.

Ensure the system is depressurized and cooled before attempting any installation, maintenance, or inspection.
Pfeka midziyo yekudzivirira yakafanira (PPE), kusanganisira magirazi ekuchengetedza uye magurovhosi.
Usadaro tamper with the factory-set pressure. Any alteration voids the warranty and can compromise safety.
Ensure proper discharge piping is installed to safely vent steam away from personnel and equipment.
Regularly inspect the valve for signs of wear, corrosion, or damage.

3. Components and Design

The Apollo Valve 13-213 Series is constructed with durable materials designed for steam applications. Key components include:

Muviri: Cast bronze for corrosion resistance and durability.
Chigaro: Flat seat design with a PTFE-faced disc for a positive seal, resistance to moisture, and high temperatures. This design also facilitates positive drainage of condensate.
Chirimo: Steel spring mechanism for reliable pressure relief.
Connections: 1-1/4" male NPT inlet and 1-1/2" female NPT outlet for secure pipe connections.

Apollo Valve 13-213 Series Bronze Safety Relief Valve, side view

Mufananidzo 2: Rutivi view of the Apollo Valve 13-213 Series, highlighting the inlet and outlet connections and the robust bronze construction.

4. Setup uye Kuiswa

Proper installation is critical for the safe and effective operation of the relief valve. Consult a qualified professional if you are unsure about any step.

Kugadzirira System: Ensure the steam boiler system is completely shut down, depressurized, and cooled before beginning installation.
Inlet Kubatana: Thread the 1-1/4" male NPT inlet of the relief valve into the corresponding female NPT connection on the boiler. Use appropriate thread sealant (e.g., PTFE tape or pipe dope) suitable for steam applications. Tighten securely to prevent leaks, but do not overtighten.
Outlet Connection: Connect the 1-1/2" female NPT outlet of the relief valve to a discharge pipe. This pipe must be adequately sized and routed to safely vent steam to an open atmosphere or a designated safe discharge area, away from personnel and equipment. Ensure the discharge pipe has no obstructions, traps, or valves that could impede flow.
Oriental: Install the valve in an upright position, ensuring the discharge path is clear and unobstructed.
Leak Tarisa: After installation, slowly bring the system up to operating pressure and carefully check all connections for leaks. Address any leaks immediately.

5. Operating Instructions

The Apollo 13-213 Series Safety Relief Valve operates automatically to protect the boiler from overpressure conditions. It is designed to open when the system pressure reaches its factory-set relief pressure of 15 psi.

Automatic Operation: When the boiler pressure exceeds 15 psi, the valve will automatically open to discharge steam, reducing the pressure within the system.
Reseating: Once the system pressure drops below the reseating pressure (typically slightly below the set pressure), the valve will automatically close, restoring the seal.
Manual Test Lever: The valve is equipped with a manual test lever. It is recommended to periodically test the valve by lifting the lever to ensure it operates freely and discharges steam. This should be done carefully and only when the boiler is at a safe operating pressure, ensuring the discharge path is clear. Refer to boiler manufacturer guidelines for specific testing frequency.

6. Kuchengeta

Regular maintenance ensures the longevity and reliable operation of your safety relief valve. Always ensure the system is depressurized and cooled before performing any maintenance.

Visual Inspection: Periodically inspect the valve for any signs of external damage, corrosion, or leaks. Check the discharge piping for obstructions.
Manual Testing: As mentioned in the operating instructions, perform periodic manual tests using the lever to ensure the valve opens and closes freely.
Kuchenesa: Keep the exterior of the valve clean. Do not use harsh chemicals that could damage the bronze or other components.
Professional Inspection: It is recommended to have the valve inspected and serviced by a qualified professional at regular intervals, as per industry standards or local regulations.

7. Kugadzirisa matambudziko

This section addresses common issues you might encounter with your safety relief valve.

Dambudziko	Zvinogona Kukonzera	Solution
Valve Leaks Continuously	Debris on seat, damaged seat/disc, incorrect system pressure.	Manually cycle the valve to clear debris. If leaking persists, the valve may need replacement or professional servicing. Verify system pressure is below set point.
Valve Does Not Open	System pressure not reaching set point, valve stuck due to corrosion/deposits, incorrect valve for application.	Verify boiler pressure gauge accuracy. Attempt manual test. If stuck, valve may need replacement. Ensure valve specifications match system requirements.
Valve Opens Prematurely	System pressure fluctuating, valve spring fatigue, incorrect valve for application.	Monitor system pressure stability. If valve is old or frequently cycles, it may need replacement. Ensure valve specifications match system requirements.

For issues not listed or if solutions do not resolve the problem, contact a qualified technician or the manufacturer.

8. Zvinotsanangurwa

Detailed technical specifications for the Apollo Valve 13-213 Series Bronze Safety Relief Valve:

Model Number: 13213B15
Rudzi rwevharuvhu: Pressure Relief Valve
Material: Bronze (Body), Steel (Spring), PTFE (Seat Disc)
Set Pressure: 15 psi (Pounds per Square Inch)
Inlet Connection Type: 1-1/4" NPT Male Threaded
Outlet Connection Type: 1-1/2" FNPT Female Threaded
Kunonyanyisa Unoshanda Tembiricha: Up to 250 degrees F
Nhamba Yezviteshi: 2
Kutevedzera: ASME Section IV - Low Pressure Steam Heating Boilers
Mugadziri: Conbraco
Zuva Rokutanga Kuwanikwa: Chivabvu 31, 2012
Package Dimensions: 5.04 x 3.5 x 2.91 inches
Chinhu Weight: 2.05 Pondo

9. Ruzivo rweWaranti

Specific warranty details for the Apollo Valve 13-213 Series are not provided within this manual. For comprehensive warranty information, please refer to the official documentation provided with your purchase or contact Apollo Valves directly through their official websaiti kana nzira dzebasa revatengi.

10. Kutsigira uye Kubata

If you require technical assistance, have questions regarding installation, operation, or maintenance, or need to report an issue, please contact the manufacturer:

Brand: Apollo
Mugadziri: Conbraco
Websaiti: www.apollovalves.com (Please note: This is a general link to the brand's website, specific support pages may vary.)

Always provide your product model number (13213B15) when seeking support.

	Apollo Air Electric Scooter User Manual - Setup, Operation, uye Chengetedza Yakakwana mushandisi bhuku reApollo Air electric scooter, inovhara setup, mashandiro, mirairo yekuchengetedza, kugadzirisa, uye ruzivo rwewaranti. Dzidza nzira yekunakidzwa neApollo Air yako zvakachengeteka.
	Push-To-Connect Washing Machine Outlet Box Installation Guide Pepa remirairo yekuisa Tectite naApollo Push-To-Connect Washing Machine Outlet Bhokisi, kusanganisira nhanho-ne-nhanho kuisirwa uye mavharuvhu ekugadzirisa.
	Apollo Tank Max 69TANKMAX Installation Instructions Detailed installation instructions and safety precautions for the Apollo Tank Max 69TANKMAX thermostatic mixing valve, designed to provide more hot water safely.
	Apollo Go Electric Scooter User Manual Yakazara mushandisi bhuku reApollo Go yemagetsi scooter, inovhara kuseta, kushanda, kugadzirisa, kugadzirisa matambudziko, uye mirairo yekuchengetedza.
	Apollo POWER VS Series Turbine Instruction Manual - HVLP Spraying Guide Comprehensive instruction manual for the Apollo POWER VS Series HVLP Turbine Spray Systems. Learn about setup, operation, maintenance, and best practices for achieving professional spray finishing results.
	Apollo City Electric Scooter User Manual Comprehensive user manual for the Apollo City electric scooter, covering setup, operation, maintenance, troubleshooting, and warranty information. Learn how to unbox, assemble, perform initial tests, charge, and maintain your Apollo City scooter.

APOLLO 13213B15