1. Nhanganyaya
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor. This device is designed to detect the sound of breaking glass, providing an early warning system for security applications. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Safety Information
Nguva dzose chengetedza zvinotevera zvekuchengetedza:
- Bvisa magetsi usati waita chero waya kana kugadzirisa.
- Kuiswa kunofanira kuitwa nevashandi vanokwanisa maererano nekodhi yese yemagetsi emunharaunda uye yenyika.
- Do not expose the sensor to moisture or extreme temperatures.
- Iva nechokwadi chekudzika kwakakodzera kudzivirira njodzi dzemagetsi.
- Chengetedza pasingasvikirwi nevana.
3. Package Zviri mukati
Tarisa uone kuti zvinhu zvese zviripo mupakeji:
- Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor
- Mounting hardware (screws, anchors)
- Installation Guide (gwaro iri)
4. Setup uye Kuiswa
The FG-1625 sensor is designed for easy installation and can be mounted in various locations to cover all glass types within a 25-foot radius. It features a FlexCore Signal Processor for reliable detection.
4.1 Nzvimbo Yekumusoro
Sarudza nzvimbo yekumisikidza inopa isina kuvharwa view of the protected glass. The sensor can be mounted on walls or ceilings. Avoid mounting directly opposite noisy areas or near air vents that could cause false alarms.
Figure 1: Honeywell Intellisense FG-1625 Acoustic Glassbreak Sensor. This image shows the compact design of the sensor, typically mounted on a wall or ceiling for optimal glassbreak detection.
4.2 Wiring Mirayiridzo
The FG-1625 is a hardwired sensor. Connect the sensor to your alarm control panel using the following wiring scheme:
- V+ (Red Wire): Connect to the positive power terminal (12V DC).
- V- (Black Wire): Connect to the negative power terminal (Ground).
- C (Yellow Wire): Connect to the Common terminal of the alarm zone.
- NC (Blue Wire): Connect to the Normally Closed terminal of the alarm zone.
Ensure all connections are secure and insulated. Refer to your alarm control panel's manual for specific zone wiring details.
4.3 Sensitivity Kugadziriswa
The sensor features selectable sensitivity settings to optimize performance for different environments and glass types. Consult the internal dip switches or jumpers (refer to the sensor's internal diagram) to adjust sensitivity. Test the sensor after adjustment using a glassbreak simulator to confirm proper operation.
5. Kushanda
Once installed and powered, the FG-1625 sensor continuously monitors for the specific acoustic frequencies associated with breaking glass. When these frequencies are detected, the sensor triggers an alarm condition on the connected security system.
- Normal Operation: The sensor remains in a standby state, monitoring its environment.
- Alarm Condition: Upon detecting glass breakage, the sensor's relay changes state, signaling the alarm control panel.
- Chiratidzo che LED: A built-in LED typically illuminates during detection or test mode to provide visual feedback. Refer to the sensor's internal documentation for specific LED behavior.
6. Kuchengeta
The Honeywell Intellisense FG-1625 sensor requires minimal maintenance to ensure continued reliable operation.
- Kuchenesa: Periodically wipe the sensor's exterior with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Kuedza: It is recommended to test the sensor annually using a glassbreak simulator to confirm its detection capabilities. Follow the instructions provided with your simulator.
- Kuongorora Zvakatipoteredza: Ensure the sensor's environment remains free from excessive vibrations, loud noises (unrelated to glass breakage), or obstructions that could interfere with its acoustic detection.
7. Kugadzirisa matambudziko
If the sensor is not functioning as expected, refer to the following common issues and solutions:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Sensor does not respond to glass breakage. |
|
|
| Manyepo ekunyevera. |
|
|
| LED not illuminating during test. |
|
|
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model Number | FG-1625 (000102701) |
| Brand | Ademco (Honeywell) |
| Sensor Type | Acoustic Glassbreak |
| Nzvimbo yekuvhara | Up to 25 feet radius |
| Simba Source | Corded Electric (typically 12V DC from alarm panel) |
| Color | Chena |
| Dimensions (L x W x H) | 1 x 4 x 3 inches |
| Item Weight | 2.88 ounces (inenge 0.18 lbs) |
| Alarm Output | Normally Closed (NC) Relay |
| UPC | 781410449596 |
9. Ruzivo rweWaranti
Specific warranty details for the Honeywell Intellisense FG-1625 sensor are typically provided at the point of purchase or within the product packaging. Generally, Ademco (Honeywell) products come with a limited manufacturer's warranty covering defects in materials and workmanship for a specified period from the date of purchase. Please retain your proof of purchase for warranty claims. For detailed warranty terms, contact your dealer or the manufacturer directly.
10. Technical Support
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact your authorized Ademco/Honeywell dealer or security system installer. You may also visit the official Honeywell Security webnzvimbo yekutsigira zviwanikwa.
