Nhanganyaya
This manual provides essential instructions for the safe and efficient use of your Ergotron WorkFit-S Dual Monitor Standing Desk Converter. Please read this manual thoroughly before assembly and operation to ensure proper functionality and to prevent injury.
The WorkFit-S Dual Monitor Standing Desk Converter is designed to transform your existing desk into an ergonomic sit-stand workstation, supporting two monitors and providing a comfortable keyboard and mouse area.
Ruzivo Rwakakosha Chekuchengetedza
- Ensure monitors do not exceed the 14-pound weight limit per screen.
- Monitors must be properly positioned and anchored for stability.
- Dhesiki clamp attaches to desktops between 0.47 to 2.4 inches thick. Verify your desk thickness before installation.
- Always adjust the workstation smoothly and carefully.
- Chengeta maoko neminwe kuti zvisasanganiswe nezvinhu zvinofamba panguva yekugadzirisa.
Setup uye Installation
The Ergotron WorkFit-S is designed for straightforward assembly. The package includes a height-adjustment column, desk clamp, crossbar, two monitor pivots, and a keyboard tray with a left/right mouse tray.
- Batanidza dhesiki clamp to your desktop, ensuring it is securely fastened to a surface between 0.47 and 2.4 inches thick.
- Mount the height-adjustment column onto the desk clamp.
- Install the crossbar and two monitor pivots onto the column. The monitor pivots are compatible with VESA patterns 75x75mm and 100x100mm.
- Attach your monitors to the pivots. Ensure each monitor weighs between 6 and 14 pounds.
- Install the keyboard tray, which includes a retractable mouse tray. The mouse tray can be installed on either the left or right side.
- Route all cables neatly through the integrated cable management system to prevent tangles and ensure smooth operation.
Figure 1: Key components of the WorkFit-S Dual Monitor Standing Desk Converter.
Figure 2: Fully assembled WorkFit-S Dual Monitor Standing Desk Converter.
Operating Instruction
The WorkFit-S allows for seamless transitions between sitting and standing positions, promoting an ergonomic workspace.
Kugadzirisa Kureba:
- To raise or lower the entire workstation (monitors and keyboard tray), gently lift or push down on the main column. The variable weight setting allows for effortless movement.
- The workstation provides 18 inches of straight up and down lift.
- The minimum monitor height is 8.5 inches, and the maximum monitor height is 31.5 inches.
Monitor Adjustment:
- Individual screens can be adjusted independently by 5 inches in height.
- Monitors can be installed at a 3.5 or 8.5-degree upward angle for optimal viewing.
- The monitors can be easily shifted left or right along the crossbar.
Keyboard Tray:
- The large 24 x 9.3-inch keyboard tray accommodates a standard keyboard.
- The retractable mouse tray can be pulled out for use and pushed back in to save space. It can be installed on either the left or right side.
- The keyboard tray folds up when not in use, providing more desk space.
Figure 3: User operating the WorkFit-S in a standing position.
Video 1: Demonstration of the Ergotron WorkFit-S in an office environment, showcasing its sit-stand functionality and ease of use.
Maintenance
To ensure the longevity and optimal performance of your WorkFit-S Dual Monitor Standing Desk Converter, follow these simple maintenance guidelines:
- Regularly inspect all fasteners and connections to ensure they are secure. Tighten if necessary.
- Nzvimbo dzakachena nehunyoro, damp jira. Dzivisa zvinochenesa zvinogumbura kana zvinonyungudutsa zvinogona kukuvadza magumo acho.
- Keep the movement mechanisms free of dust and debris.
Kugadzirisa matambudziko
If you encounter any issues with your WorkFit-S, please refer to the following common solutions:
- Kuoma kugadzirisa kukwirira: Check if the variable weight setting is correctly adjusted for the combined weight of your monitors. Ensure no obstructions are impeding movement.
- Monitors not stable: Verify that the monitor pivots are securely attached to the crossbar and that the VESA mounts are tightly fastened to your monitors. Ensure the desk clamp is firmly secured to your desktop.
- Wobbling: Confirm all assembly screws are tightened. Ensure the desk surface itself is stable.
If problems persist, please contact Ergotron customer support for assistance.
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Ergotron |
| Model Number | 33-341-200 |
| Color | Nhema |
| Monitor Kugarisana | Two screens up to 24 inches diagonal, 6 to 14 lbs each |
| VESA kuenderana | 75x75mm, 100x100mm |
| Vertical Lift | 18 inches (45.7 cm) |
| Independent Screen Height Adjustment | 5 inches (12.7 cm) |
| Minimum Monitor Height | 8.5 inches (21.6 cm) |
| Maximum Monitor Height | 31.5 inches (80 cm) |
| Zviyero zveKiibhodhi yeTireyi | 24 x 9.3 inches (61 x 23.6 cm) |
| Desk Clamp Makobvu Range | 0.47 kusvika 2.4 inches (1.2 kusvika 6 cm) |
| Item Weight | 7.2 ounces (0.2 kg) - Note: This seems to be an error in the source data, likely referring to a component, not the full unit. |
| Material | Alloy Steel, Plastiki |
| Gungano Rinodiwa | No (Pre-assembled components) |
Warranty Information
The Ergotron WorkFit-S Dual Monitor Standing Desk Converter comes with a 5-makore mashoma waranti. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, please refer to the official Ergotron warranty documentation or contact customer support.
Mutengi Support
For technical assistance, warranty claims, or any questions regarding your Ergotron WorkFit-S product, please visit the official Ergotron website or contact their customer support team. Contact information can typically be found on the product packaging or the manufacturer's website.
