Product Overview
The Pico 7146QT Nylon Cable Clamps are designed for efficiently channeling and securing cables and wires. These durable clamps provide a reliable solution for organizing electrical wiring in various applications. Each package contains 3 clamps, offering convenience for multiple installations.
Zvinokosha:
- Mukati Diameter: 5/8" (when closed)
- Clamp Upamhi: 1/2"
- Screw Hole Diameter: 0.203"
- Ruvara: Nhema
- Huwandu: 3 clamps pasuru
Izvi clamps are engineered to withstand a wide range of temperatures, with a maximum operating temperature from -60°F to 275°F, ensuring performance in diverse environments.
Image: A single black nylon cable clamp, showing its circular shape when closed and the screw hole for mounting. This clamp is designed for securing cables with a 5/8 inch diameter.
Setup uye Installation
Before installation, ensure the cable or wire bundle to be secured has an outside diameter of approximately 5/8 inches or less to fit properly within the clamp's closed diameter.
- Ziva Nzvimbo Yekukwirisa: Choose a suitable surface for mounting the cable clamp. The surface should be clean, dry, and capable of securely holding a screw.
- Isa iyo Clamp: Isa tambo clamp in the desired position. The clamp has a pre-drilled screw hole with a 0.203" diameter.
- Mark and Drill (if necessary): Shandisa clamp's screw hole as a guide to mark the drilling point on the mounting surface. If the surface requires it, pre-drill a pilot hole appropriate for your chosen mounting screw.
- Insert Cables: Vhura clamp slightly and insert the cable(s) or wire bundle into the clamp's interior. Ensure the cables are neatly routed and not under excessive tension.
- Chengetedza Clamp: Insert a suitable screw (not included) through the clamp's screw hole and fasten it securely to the mounting surface. Do not overtighten, as this may damage the clamp or the mounting surface.
- Verify Security: Gently tug on the secured cables to ensure the clamp is firmly attached and the cables are held in place without excessive movement.
Note: Always use appropriate safety measures when working with tools and electrical components.
Operating Guidelines
These cable clamps are passive components designed to provide a fixed routing and securing point for cables and wires. Once installed, they require no active operation.
Maitiro Akanakisisa:
- Ensure the cables are not pinched or excessively compressed by the clamp.
- Distribute cable weight evenly across multiple clamps if securing long or heavy runs.
- Avoid installing clamps in areas subject to extreme abrasion or chemical exposure that could degrade nylon.
Maintenance
Pico nylon cable clamps are designed for long-term durability and require minimal maintenance.
- Periodic Inspection: Periodically inspect installed clamps for any signs of wear, cracking, or loosening, especially in high-vibration environments or areas with significant temperature fluctuations.
- Kuchenesa: Kana zvichidikanwa, chenesa clamps pamwe adamp cloth. Avoid harsh chemical cleaners that may degrade the nylon material.
- Kutsiva: Kana clamp shows signs of damage or degradation, replace it immediately to maintain the integrity of your cable management system.
Kugadzirisa matambudziko
Most issues related to cable clamps are due to improper installation or selection.
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Cables are loose within the clamp. | Clamp ID is too large for the cable bundle. | Shandisa clamp with a smaller inside diameter. Ensure the cable bundle fills the clamp zvakakwana. |
| Clamp breaks during installation. | Overtightening of the mounting screw. | Do not overtighten. Fasten until snug, then a quarter turn more. |
| Clamp becomes brittle or cracks over time. | Exposure to extreme temperatures outside specified range or harsh chemicals. | Ensure operating environment is within -60°F to 275°F. Avoid chemical exposure. Replace damaged clamps. |
| Clamp detaches from mounting surface. | Improper screw size or type; insufficient mounting surface. | Use a screw appropriate for the 0.203" hole and the mounting material. Ensure the surface is strong enough. |
Zvinotsanangurwa
| Attribute | Detail |
|---|---|
| Chikamu Nhamba | 7146QT |
| Model Number | 7146 |
| Brand | Pico |
| Mugadziri | Pacific Industrial Components |
| Material | Nylon |
| Inside Diameter (Closed) | 5/8 inches |
| Clamp Upamhi | 1/2 inches |
| Screw Hole Diameter | 0.203 inches |
| Color | Nhema |
| Item Package Quantity | 3 |
| Item Weight | 0.32 ounces (9.07 gramu) |
| Maximum Operating Temperature | 275°F |
| Minimum Operating Temperature | -60 ° F |
| ASIN | B004C07XW2 |
| UPC | 035704971462 |
| Zuva Rokutanga Kuwanikwa | Chikumi 3, 2007 |
Warranty uye Support
For specific warranty information regarding the Pico 7146QT Nylon Cable Clamps, please refer to the packaging or contact Pacific Industrial Components directly. General product support and inquiries can also be directed to the manufacturer.
Mugadziri: Pacific Industrial Components
For the most up-to-date contact information, please visit the official Pico or Pacific Industrial Components webwebhusaiti kana kuti tarisa magwaro ako ekutenga.
