Bhuku reMirayiridzo yePurojekita yeLCD yeNEC NP-PA500U

1. Nhanganyaya

This manual provides essential instructions for the safe and efficient operation of your NEC NP-PA500U LCD Projector. Please read this manual thoroughly before using the projector and retain it for future reference. The NEC NP-PA500U is a 3D Ready LCD projector offering 5000 ANSI lumens brightness and WUXGA (1920 x 1200) resolution, designed for high-definition widescreen projection.

2. Safety Information

Observe the following safety precautions to prevent damage to the projector and ensure user safety:

• Do not block ventilation openings. Ensure adequate airflow around the projector.
• Usatarise zvakananga muprojekita lens kana iyo lamp iri on. Chiedza chakasimba chinogona kukuvadza maziso.
• Avoid placing the projector in direct sunlight, near heat sources, or in environments with high humidity or excessive dust.
• Use only the power cord supplied with the projector or an approved replacement.
• Refer all servicing to qualified service personnel. Do not attempt to open or repair the projector yourself.

3. Package Zviri mukati

Tarisa uone kuti zvinhu zvese zviripo mupakeji:

• NEC NP-PA500U LCD Projector (main unit)
• Remote Control
• HDMI Cable
• USB Cable
• Ethernet Cable
• VGA Cable
• RatidzaPort Cable
• Kutakura Nyaya
• Power Cord
• Mushandisi Chinyorwa (gwaro iri)

4. Chigadzirwa Pamusoroview

Familiarize yourself with the main components of the NEC NP-PA500U projector.

Mufananidzo 1: Mberi view of the NEC NP-PA500U LCD Projector. This image shows the projector's white casing, the central lens assembly, and various control dials and vents on the front panel.

Zvinokosha:

• Ratidza Tekinoroji: 0.76" LCD with MLA
• Contrast Ration: Kusvika ku2000:1
• Lamp Type: 330W AC / 264W eco
• Lamp Hupenyu: Up to 3000 hours (normal mode) / 4000 hours (eco mode)
• Supported Video Standards: NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM
• Kubatana: HDMI, USB, Ethernet, VGA, DisplayPort
• Special Feature: 3D-Ready capability

5. Setup

5.1 Kuiswa Kwenyama

Position the projector on a stable, level surface or mount it securely to a ceiling. Ensure there is sufficient space around the projector for ventilation. The distance from the screen will determine the image size. Adjust the projector's feet to level the image if necessary.

5.2 Kubatanidza Zvishandiso

Connect your video source (e.g., computer, Blu-ray player) to the projector using the appropriate cable. The NP-PA500U supports various input types:

• HDMI: Kuti uwane vhidhiyo neodhiyo zvedhijitari zvine hungwaru.
• VGA: For analog computer signals.
• DisplayPort: For high-resolution digital video.
• USB: For connecting USB devices or for direct presentation from a USB drive.
• Ethernet Kudzora nekutarisa network.

After connecting the video source, connect the power cord to the projector and then to a grounded electrical outlet.

6. Operating Instructions

6.1 Simba On/Kudzima

1. Kubatidza: Press the SIMBA button on the projector's control panel or the remote control. The power indicator light will illuminate.
2. Kudzima: Press the SIMBA button twice. The projector will enter a cooling cycle before shutting down completely. Do not unplug the projector during the cooling cycle.

6.2 Basic Operation

• Sarudzo yezvinopinza: Shandisa iyo INPUT button on the remote or control panel to cycle through available input sources (HDMI, VGA, DisplayPort, USB).
• Menu Navigation: Press the MENU button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the PINDA bhatani rekusarudza sarudzo.
• Focus and Zoom: Adjust the focus and zoom rings on the projector lens to achieve a clear and appropriately sized image.
• Keystone Kugadziriswa: If the image appears trapezoidal, use the keystone correction function in the OSD menu to square the image.

6.3 Kugadziriswa Kwemufananidzo

Access the OSD menu to fine-tune image settings:

• Kupenya/Kusiyanisa: Adjust these settings to optimize image visibility for your viewing environment.
• Ruvara/Ruvara: Kugadzira mavara zvakanaka.
• Aspect ratio: Select the appropriate aspect ratio (e.g., 16:10 for WUXGA, 16:9 for 1080p) to match your content.
• Mufananidzo Mode: Choose from preset picture modes (e.g., Standard, Cinema, Dynamic) or customize your own.

7. Kuchengeta

Kugadziriswa nguva dzose kunoita kuti purojekita yako ishande zvakanaka uye kunoita kuti irambe ichirarama kwenguva refu.

7.1 Lamp Kutsiva

Purojekita lamp ine hupenyu husingagumi. Kana lamp life indicator appears or the image brightness significantly decreases, replace the lamp. Refer to the detailed instructions in the full service manual for safe lamp maitiro ekutsiva. Gara uchibvumira purojekita kuti itonhore zvachose usati waedzaamp kutsiva.

7.2 Kuchenesa Sefa

Dust accumulation on the air filter can impede airflow and cause overheating. Clean the air filter regularly (e.g., every 100-200 hours of operation) using a soft brush or vacuum cleaner. Replace the filter if it is damaged or excessively dirty.

7.3 Kutarisira Kwese

• Clean the projector casing nemucheka munyoro, wakaoma. Usashandise abrasive cleaners kana solvents.
• Gently clean the projector lens with a lens cleaning cloth and lens cleaning solution designed for optical surfaces.
• When not in use for extended periods, store the projector in a cool, dry place, preferably in its carrying case.

8. Kugadzirisa matambudziko

Ichi chikamu chinotarisa zvinowanzoitika zvaungasangana nazvo. Kuti uwane mamwe matambudziko akaoma, bata rutsigiro rwevatengi.

9. Zvinotsanangurwa

10. Warranty uye Tsigiro

For warranty information and technical support, please refer to the warranty card included with your product or visit the official NEC website. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kwezvichemo zvewaranti.

Rutsigiro rwepamhepo: www.nec.com/en/global/support/index.html