Pentair 263038 1-1/2-Inch 2-Way PVC Diverter Valve: Installation and Operation Manual

1. Nhanganyaya

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pentair 263038 1-1/2-Inch 2-Way PVC Diverter Valve. This valve is designed for diverting, shut-off, or mixing applications in various plumbing systems, particularly in pool and spa environments. Please read these instructions thoroughly before installation and use.

2. Safety Information

YAMBIRO: Always disconnect power to pumps and other equipment before working on any plumbing system. Failure to do so may result in serious injury or death.

CHENJERERO: This valve is designed for specific applications. Ensure it is compatible with your system's pressure and chemical requirements. Maximum pressure rating is 150 PSI.

Pfeka yakakodzera midziyo yekudzivirira yemunhu (PPE) panguva yekuisa uye kugadzirisa.
Iva nechokwadi chekuti ma connection ese akavharwa zvakanaka kudzivirira kudonha kwemvura.
Do not overtighten fittings, as this can damage the valve body.
Chengetedza pasingasvikirwi nevana.

3. Chigadzirwa Pamusoroview

The Pentair 263038 is a robust 1-1/2-inch 2-way diverter valve constructed from durable PVC or CPVC material. It features a high flow rate design and a fiberglass-reinforced handle for reliable operation. The valve is equipped with a maintenance-free Teflon coated diverter seal, ensuring optimum positive sealing and longevity.

Zvinokosha:

Available in PVC or CPVC construction.
Maintenance-free Teflon coated diverter seal for reliable performance.
Optimum positive-seal mechanism.
Designed for high flow rate applications.
Features a fiberglass reinforced handle for durability.
Withstands pressure up to 150 PSI.
Chemical-resistant for various applications.
Field-adjustable stop positions for precise control.
Can be plumbed with the inlet at any port.

Component Identification:

Pamusoro-pasi view of Pentair 263038 diverter valve with handle — **Mufananidzo 3.1:** Pamusoro-pasi view of the Pentair 263038 diverter valve, showing the handle and port markings. The handle allows for selection of flow direction or shut-off.

Pamusoro zvakananga view of Pentair 263038 diverter valve showing 'OFF' position — **Mufananidzo 3.2:** Pamusoro zvakananga view of the valve, highlighting the "OFF" position indicator and the various port settings around the handle base. This view clearly shows the rotational mechanism.

Side view of Pentair 263038 diverter valve — **Mufananidzo 3.3:** Side view of the diverter valve, illustrating the main body and the two primary ports for plumbing connections. The robust construction is visible.

End view of Pentair 263038 diverter valve showing one 1-1/2 inch port — **Mufananidzo 3.4:** End view of the valve, showing one of the 1-1/2 inch connection ports. This port is designed for solvent welding to standard PVC or CPVC piping.

4. Setup uye Kuiswa

Proper installation is crucial for the optimal performance and longevity of your diverter valve. This valve is designed for 1-1/2-inch plumbing connections.

4.1 Rondedzero Yekutarisa Pamberi Pekuisa:

Verify that the valve material (PVC or CPVC) is compatible with your existing plumbing and the chemicals used in your system.
Ensure you have all necessary tools and materials, including PVC/CPVC cement, primer, measuring tape, and pipe cutters.
Confirm that the installation location allows for easy access to the valve handle for operation and future maintenance.

4.2 Matanho ekuisa:

Plan Plumbing Layout: Determine the desired flow path for diverting, mixing, or shut-off applications. The valve can be plumbed with the inlet at any port.
Gadzirira Mapaipi: Cut the existing or new pipes to the correct length, ensuring clean, straight cuts. Deburr the edges of the pipes.
Dry Fit: Temporarily fit the valve and pipes together without cement to ensure proper alignment and fit. Mark the pipes and valve for correct orientation.
Apply Primer and Cement: Apply PVC/CPVC primer to both the outside of the pipe and the inside of the valve port. Follow immediately with a generous, even coat of PVC/CPVC cement to both surfaces.
Join Connections: Quickly insert the pipe into the valve port with a quarter-turn twist until it bottoms out. Hold firmly for 30 seconds to allow the cement to set.
Dzokorora kune ese maPorts: Connect all necessary pipes to the valve ports using the same priming and cementing procedure.
Nguva yekurapa: Allow adequate cure time for the cement as recommended by the cement manufacturer before pressurizing the system.
Adjust Stop Positions (Optional): The valve features field-adjustable stop positions. If specific flow limits are required, consult the markings on the valve top and adjust the internal stops as needed using a screwdriver.

Cherechedza: For detailed instructions on solvent welding, refer to the specific PVC/CPVC cement manufacturer's guidelines.

5. Operating Instructions

The Pentair 263038 diverter valve allows for easy control of water flow. The fiberglass-reinforced handle is used to select the desired flow path.

5.1 Understanding Valve Positions:

The top of the valve features markings and a rotating handle. The handle's position indicates the active flow path. Common positions include:

Diverting: Directs water from one inlet to one of two outlets, or from two inlets to one outlet.
Kuvhara: Completely stops flow through the valve. This is typically indicated by an "OFF" marking on the valve body.
Kusanganisa: Combines flow from two inlets into a single outlet.

Rotate the handle to align with the desired port or function indicated on the valve body. The field-adjustable stops can be set to limit the handle's rotation to specific positions if needed.

5.2 General Operation:

Ensure the system is not under excessive pressure before adjusting the valve, especially if making significant changes to flow.
Grasp the fiberglass-reinforced handle firmly.
Rotate the handle to the desired position. The handle should move smoothly.
Verify the flow change in your system.

Cherechedza: If the handle feels stiff, do not force it. Refer to the Maintenance section for lubrication or inspection.

6. Kuchengeta

The Pentair 263038 diverter valve is designed for minimal maintenance due to its maintenance-free Teflon coated diverter seal. However, periodic inspection and occasional servicing can extend its lifespan.

6.1 Routine Inspection:

Periodically check for any signs of leaks around the valve body or connections.
Inspect the handle for any damage or excessive wear.
Ensure the handle rotates smoothly between positions.

6.2 Servicing (If Required):

While the Teflon seal is maintenance-free, if the valve becomes stiff to operate or develops a leak from the stem, it may be serviceable. The valve can typically be disassembled by removing the screws on the top cover. This allows access to the diverter and seals for cleaning or replacement if necessary. Use only manufacturer-approved lubricants for O-rings and seals if reassembly is performed.

CHENJERERO: Disassemble the valve only if you are comfortable with plumbing repairs. Ensure the system is depressurized and drained before attempting any servicing.

7. Kugadzirisa matambudziko

This section addresses common issues you might encounter with your diverter valve.

Dambudziko	Zvinogona Kukonzera	Solution
Valve Leaks at Connections	Improper solvent welding; cracked pipe or fitting.	Ensure proper application of primer and cement during installation. If leaking persists, the connection may need to be cut out and re-plumbed.
Valve Leaks from Handle/Stem Area	Worn or damaged internal seals (O-rings).	The valve may require disassembly to inspect and replace internal seals. Contact a qualified technician if unsure.
Handle is Stiff or Hard to Turn	Accumulation of debris; lack of lubrication on internal seals; overtightened components.	Disassemble the valve (if comfortable) to clean out debris and apply a silicone-based lubricant to the diverter and O-rings. Ensure screws are tightened appropriately, not excessively.
Incomplete Flow Diversion	Handle not fully seated in position; internal debris obstructing flow.	Ensure the handle is rotated completely to the desired stop position. If the issue persists, inspect the internal mechanism for obstructions.

8. Zvinotsanangurwa

Detailed technical specifications for the Pentair 263038 1-1/2-Inch 2-Way PVC Diverter Valve.

Attribute	Detail
Model Number	263038
Brand	Penair
Material	PVC or CPVC
Exterior Finish	PVC or CPVC
Nhamba yePorts	2
Inlet Connection Size	1.5 inches
Outlet Kubatanidza Saizi	1.5 inches
Maximum Pressure	150 PSI
Zviyero (L x W x H)	7 x 7 x 6 inches
Item Weight	1.5 makirogiramu
Mugadziri	PENTAIR WATER POOL AND SPA, IN
UPC	788379644352, 797267286857, 718472683019, 797267790163

9. Warranty uye Tsigiro

For specific warranty information regarding your Pentair 263038 diverter valve, please refer to the documentation included with your purchase or visit the official Pentair website. Warranty mitemo uye mamiriro anogona kusiyana.

For technical support, replacement parts, or further assistance, please contact Pentair customer service directly. Contact information can typically be found on the Pentair websaiti kana pane yako chigadzirwa kurongedza.

Mushandi wePentair Websaiti: www.penair.com

	Mirayiridzo yekuisa Pentair Automatic By-Pass Valve Kit (P/N 462048) Gwaro rakakwana rekuisa Pentair Automatic By-Pass Valve Kit (P/N 462048), rakagadzirirwa MasterTemp neMax-E-Therm pool uye spa heaters. Rinosanganisira yambiro dzekuchengetedza dzakakosha, overview nezvemabhenefiti ehurongwa uhu, maitiro akadzama ekuisa pombi neactuator, uye nhanho nhanho mirairo yekugadzirisa nzvimbo dzepamba nedzekumagumo kuti pave nemahydraulics edziva akakodzera.
	Pentair T40-FN Automatic Pool Filler yeVanishing Edge Pools - Gwaro Rekuisa Dzidza nezvePentair T40-FN Automatic Pool Filler, yakagadzirirwa madziva emumucheto ari kunyangarika. Gwaro iri rinopa ruzivo rwekuisa uye yambiro dzekuchengetedza kuti uve nechokwadi chekuti wakabatana zvakanaka ne catch basins uye rebar.
	Pentair MagicStream Laminar: Kuisa, Kushanda, uye Chengetedza Gwaro Yakakwana gwara rekuisa, kushanda, uye kuchengetedza iyo Penair MagicStream Laminar, gumi nemaviri VAC LED yemvura chimiro chemadziva uye spas. Inovhara kuchengetedza, magetsi ekubatanidza, control system yekubatanidza, uye kugadzirisa matambudziko.
	Penair TagKuiswa kweElus Sand Filter uye Gwaro reMushandisi Gwaro rakakwana rekuisa, kushanda, kugadzirisa, uye kugadzirisa matambudziko ePentair Tagelus Sand Filters uye HiFlow 6-Way Valves. Inosanganisira mirairo yekuchengetedza, zvikamu zvekutsiva, uye hunyanzvi hwekugadzira.
	Pentair IntelliChlor® Salt Chlorine Generator IC15, IC20, IC40, IC60 Kuisa uye Gwaro Rekushandisa Kuisa kwakakwana uye gwara rekushandisa rePentair IntelliChlor® Salt Chlorine Generator modhi IC15, IC20, IC40, uye IC60. Inovhara kuchengetedzeka, gadziriro, mashandiro, kugadzirisa, kemikari yemvura, uye matambudziko ehutsanana hwedziva rekugara.
	Kuisa uye Gwaro reVashandisi vePentair IntelliBrite Architectural Series Dziva rePasi neMarambi eSpa Gwaro iri rinopa mirairo yakazara yekuisa, kushandisa, uye kuchengetedza Pentair IntelliBrite Architectural Series Pool and Spa Lights, ichitarisa kuchengetedzeka, zvinodiwa nemagetsi, nzira dzekushanda, uye zvikamu zvekutsiva.

Pentair 263038