Bhuku rekushandisa reInFocus IN112 Portable DLP Purojekita

1. Nhanganyaya

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Chii chiri muBhokisi

Iva nechokwadi chekuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yechigadzirwa chako:

• InFocus IN112 Projector
• Simba tambo
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Mirayiridzo yekuchengetedza
• Bhuku rekushandisa (gwaro iri)
• Remote control

3. Projector Overview

Mufananidzo 1: Pamusoro View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Mufananidzo 2: Rutivi View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Mufananidzo 3: Angled View na Remote - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Mufananidzo 4: Kumashure View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Setup

4.1 Kuiswa

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Simba Connection

1. Connect the supplied power cord to the projector's power inlet.
2. Batanidza imwe magumo etambo yemagetsi mugetsi rinodzika pasi.

4.3 Kubatanidza Manyuko Ekuisa

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Vhidhiyo Yakasanganiswa: Use the A/V cable to connect to devices with composite video output.
• S-Vhidhiyo: Connect to devices with S-Video output.
• Audio In: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Ensure all cables are securely connected before powering on the projector.

5. Operating Instructions

5.1 Simba On/Kudzima

• Kuti ubatidze, tinya iyo Simba button on the control panel or remote control. The power indicator light will illuminate.
• Kuti udzime, tinya iyo Simba button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Kugadziriswa Kwemufananidzo

• Tarisa: Tenderedza rin'i yekutarisa iri pagirazi reprojekita kusvika mufananidzo wanyatsojeka uye wakajeka.
• Keystone: Shandisa iyo Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Source Selection

Press the Source button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Menyu Navigation

Press the Menyu/Kubuda button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Sarudza or Enter bhatani kuti usimbise sarudzo. Dzvanya Menyu/Kubuda again to close the menu.

5.5 Eco Mamiriro

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Kuchengeta

6.1 Lamp Kutsiva

Purojekita lamp ine hupenyu husingagumi. Kana lamp chiratidzo (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Yambiro: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Kuchenesa

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Kugadzirisa matambudziko

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

9.1 Chigadzirwa Chivimbiso

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5-makore mashoma waranti papurojekita.
• 2-gore rakazara warandi covering parts and labor.
• 6-mwedzi waranti pa lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus website.

9.2 Tsigiro yehunyanzvi

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official websaiti kana mune zvinyorwa zvinosanganisirwa.

10. Related Product Information (IN130 Series)

Vhidhiyo inotevera inopa mhinduro pamusoroview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.