Bhuku rekushandisa reJTS SIEM-2 Professional Wireless In-Ear Monitor System

Nhanganyaya

The JTS SIEM-2 is a professional UHF PLL wireless in-ear monitor system designed for musicians, performers, and presenters. This system provides reliable and high-quality mono audio transmission, ensuring clear monitoring during live performances or studio sessions. It comprises a SIEM-2T transmitter, a SIEM-2R receiver, and IE-1 earphones, offering 16 selectable channels for flexible operation within the 638 MHz to 662 MHz frequency band.

Package Zviri mukati

Ndokumbira utarise kuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yako:

1 x SIEM-2T Transmitter
1 x SIEM-2R Receiver
1 x IE-1 Earphones
Multiple pairs of ear tips (various sizes)
Power Adapter yeTransmitter
Mushandisi Chinyorwa (gwaro iri)

Chikamu Pamusoroview

This image displays the complete JTS SIEM-2 wireless in-ear monitor system. It features the compact SIEM-2R receiver with a channel display and attached IE-1 earphones, which come with a clear case containing multiple sizes of ear tips. Below these, the SIEM-2T transmitter is shown with input controls, XLR inputs, and a channel display.

SIEM-2T Transmitter

Front Panel: Power switch, Input Level controls, AF Level LED display, Channel display, Channel selection buttons, 2 x balanced XLR audio input connectors, 2 x Ø6.3 mm balanced loop out sockets.
Rear Panel: DC power input, Antenna connector.

SIEM-2R Receiver

Front Panel: Power On/Off switch, Channel display, Channel selection buttons, Volume control.
Side Panel: 1/8" stereo jack output for earphones.
Battery Compartment: Located on the rear, for 2 x AA batteries.

IE-1 Earphones

Dynamic transducer type.
Attached cable with Ø3.5 stereo connector.
Comes with various sizes of silicone ear tips for optimal fit and sound isolation.

Gadzirira

1. SIEM-2T Transmitter Setup

Kuiswa: Position the transmitter in a stable location, away from other wireless devices that may cause interference. Ensure the antenna has a clear line of sight to the receiver.
Power Connection: Connect the provided power adapter to the DC input on the rear of the SIEM-2T transmitter and plug it into a suitable power outlet (12-18 Vdc).
Kupinza Kwekunzwa: Connect your audio source (e.g., mixing console, audio interface) to the balanced XLR audio input connectors on the front panel. Use the Input Level controls to adjust the input signal strength. The AF Level LED display will help monitor the audio input.
Loop Out (Optional): If you need to send the audio signal to other devices, use the Ø6.3 mm balanced loop out sockets.
Power On: Turn on the transmitter using the power switch. The channel display will illuminate.

2. SIEM-2R Receiver Setup

Kuisa Battery: Open the battery compartment on the rear of the SIEM-2R receiver. Insert 2 x AA batteries, ensuring correct polarity. Close the compartment securely.
Kubatanidza Nzeve: Plug the IE-1 earphones into the 1/8" stereo jack output on the side of the receiver.
Kusarudzwa kwemuromo wenzeve: Choose the ear tips that provide the best fit and comfort for your ears. A good seal is crucial for optimal sound quality and bass response.
Power On: Turn on the receiver using the Power On/Off switch. The channel display will illuminate.

3. Channel Synchronization

For proper operation, the transmitter and receiver must be set to the same channel.

On the SIEM-2T transmitter, use the channel selection buttons to choose a desired channel.
On the SIEM-2R receiver, use its channel selection buttons to match the channel displayed on the transmitter.
Once synchronized, the receiver should pick up the audio signal from the transmitter.

Operating Instruction

Simba On/Kudzima

To power on the SIEM-2T transmitter, press its power switch.
To power on the SIEM-2R receiver, slide its Power On/Off switch to the 'On' position.
To power off, reverse these steps.

Channel Selection

Both the transmitter and receiver have channel selection buttons. Use these to cycle through the available 16 channels. Ensure both units are set to the same channel for proper audio transmission.

Volume Control

Adjust the monitoring volume using the volume control knob on the SIEM-2R receiver. Start with a low volume and gradually increase it to a comfortable listening level to prevent hearing damage.

Maintenance

Kuchenesa

Wipe the surfaces of the transmitter and receiver with a soft, dry cloth.
For the IE-1 earphones, gently remove the ear tips and clean them with mild soap and water. Ensure they are completely dry before reattaching.
Usashandise abrasive cleaners, solvents, kana makemikari ane hasha.

Battery Replacement (SIEM-2R Receiver)

When the battery indicator on the SIEM-2R receiver shows low power, or if audio quality degrades, replace the AA batteries. Always use fresh, high-quality alkaline or rechargeable AA batteries. Dispose of used batteries responsibly.

Kugadzirisa matambudziko

Dambudziko	Zvinogona Kukonzera	Solution
No audio from earphones.	Receiver or transmitter not powered on. Batteries in receiver are dead or low. Transmitter and receiver on different channels. Mahedhifoni haana kubatana zvakanaka kana kuti haana kunaka. Audio source not connected to transmitter or muted.	Ita shuwa kuti mayunitsi ese ari maviri akabatidzwa. Replace receiver batteries. Iva nechokwadi chekuti mayuniti ese ari pachiteshi chimwe chete. Check earphone connection; test with another pair if available. Check audio source connection and volume.
Poor audio quality / Static / Dropouts.	Kupindira kubva kune mamwe mawaya ekushandisa. Kunze kwezera. Low battery in receiver. Incorrect input level on transmitter.	Chinja kune imwe chiteshi. Swedera pedyo nechitunha. Replace receiver batteries. Adjust transmitter input level to avoid clipping or being too low.
Receiver not turning on.	Batteries incorrectly inserted or dead.	Tarisa bhatiri polarity; kutsiva mabhatiri.

Zvinotsanangurwa

Chikamu	Tsanangudzo
System	Type: UHF PLL Wireless In-Ear Monitor System Frequency Band: 638 MHz - 662 MHz (Mono Audio Transmission) Selectable Channels: 16 Wireless Range: Up to 60 meters (approx. 197 feet)
SIEM-2T Transmitter	Frequency Range: 502 ~ 960 MHz RF Kubuda Simba: 10 mW Nominal Frequency Deviation: ± 40 kHz Audio Input Impedance: 20 KΩ Nominal Input Level: -20 dBV Maximum Input Level: 0 dBV Audio Input Connectors: 2 x Balanced XLR Loop Out Connectors: 2 x Ø6.3 mm Balanced Kushanda Voltage: 12 – 18 Vdc – 600 mA Display: LED (AF level, Channel)
SIEM-2R Receiver	Frequency Kugadzirira: PLL Synthesized Control Frequency Range: 502 ~ 960 MHz Audio Frequency Response: 40 ~ 18,000 Hz Output Connector: 1/8" Stereo Jack Hupenyu hweBhatiri: Anenge maawa makumi maviri nemana Battery Type: 2 x AA batteries (not included) Display: LED (Channel)
IE-1 Earphones	Frequency Mhinduro: 20 ~ 20,000 Hz Rudzi rweTransducer: Inoshanduka Impedance: 16 ohms (at 1000 Hz) Kunzwiwa: 114 dB / mW Kukanganisa: <0.3% Cable Length: 148 cm (approx. 58 inches) Connector: Ø3.5 Stereo Weight: 6 gr (approx. 0.21 oz)
General	Model Number: JTS-IES1 Mutengo: JTS Special Features: Volume Control

Warranty uye Support

JTS products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service, please refer to the official JTS websaiti kana kubata mutengesi wako ane mvumo.

Spare Parts Kuwanikwa: Mashoko haapo.
Zvigadziriso zveSoftware: Ruzivo haruwanike.

Ndapota chengetedza humbowo hwako hwekutenga kune chero vimbiso yewaranti.

	JTS UC-900 Musanganiswa weAntena weNzira Nhatu: Magadzirirwo ehunyanzvi uye Mashandisirwo Ruzivo rwakadzama nezve JTS UC-900 antenna combiner ine nzira ina, kusanganisira hunyanzvi hwayo, mashandisirwo ayo, nhungamiro dzekuchengetedza, uye ruzivo rwemugadziri. Yakagadzirirwa mainjini ekutsvaga.
	JTS AH-1 UHF PLL Plug-On Transmitter Product Manual Ichi chigadzirwa chinyorwa chinopa ruzivo rwakadzama nezveJTS AH-1 UHF PLL Plug-On Transmitter, kusanganisira sisitimu mashandiro emirairo, maficha, zvakatemwa, uye zvakakosha zviziviso.
	Bhuku rekushandisa reJTS E-7/E-7TH UHF Wireless System Bhuku rekushandisa rakakwana reJTS E-7/E-7TH single-channel UHF wireless system ine maikorofoni yemahedhifoni, inosanganisira zvinodiwa, kuzivikanwa kwezvikamu, kubatana, mashandiro, uye manotsi echigadzirwa.
	Bhuku rekushandisa JTS UF-20DA/JSS-20/UF-20TB Professional Wideband True Diversity System This manual provides comprehensive instructions for the JTS UF-20DA Wideband True Diversity Receiver, JSS-20 Handheld Transmitter, and UF-20TB Body-Pack Transmitter. It covers system operation, features, specifications, parts identification, connection methods, and important notices for optimal use.
	JTS GML Series Gooseneck Maikorofoni Instruction Manual Bhuku remirayiridzo yeJTS GML Series Gooseneck Microphones, maficha anotsanangura, magadzirirwo, kuiswa, uye zvishongedzo zvemamodheru eGML-5206, GML-5212, uye GML-5218.
	Bhuku rekushandisa reJTS CM-825IF Makirofoni Akareruka Ane Nzeve Dual Hook Bhuku rekushandisa reJTS CM-825IF Lightweight Dual Ear Hook Microphone, rinotsanangura magadzirirwo, zvinodiwa, uye maitiro ekupfeka.

JTS JTS-IES1