ARB R/Drawer R/Floor RDRF1355 Instruction Manual

1. Nhanganyaya

This manual provides essential information for the safe and effective installation, operation, and maintenance of your ARB R/Drawer R/Floor RDRF1355 cargo management system. Please read these instructions thoroughly before proceeding with installation or use to ensure proper function and longevity of the product.

2. Safety Information

Nguva dzose verenga uye unzwisise mirairo yese usati waisa uye washandisa.
Ensure the unit is securely mounted to the vehicle's floor according to the installation guidelines to prevent movement during transit.
Do not exceed the maximum weight capacity of the drawer or the roller floor. Refer to the specifications section for details.
Secure all cargo within and on top of the drawer system to prevent shifting during vehicle movement, which could cause injury or damage.
Keep hands and fingers clear of moving parts, especially when opening or closing the drawer.
Regularly inspect the unit for any signs of wear, damage, or loose fasteners. Address any issues promptly.

3. Package Zviri mukati

Iva nechokwadi chekuti zvese zvirimo uye hazvina kukuvara usati watanga kuisa. Pakeji yacho inofanira kunge iine:

ARB R/Drawer R/Floor RDRF1355 unit
Mounting hardware kit (bolts, washers, nuts, brackets)
Keys for drawer lock (if applicable)
Bhuku rekuraira (gwaro iri)

Note: Specific contents may vary slightly. Contact your dealer if any parts are missing or damaged.

4. Setup uye Kuiswa

Proper installation is critical for the safety and performance of your ARB R/Drawer R/Floor system. It is recommended that installation be performed by a qualified technician if you are unsure of any steps.

Prepare Vehicle Cargo Area: Clear the vehicle's cargo area of any existing mats, liners, or obstructions. Ensure the surface is clean and dry.
Isa iyo Unit: Carefully place the ARB R/Drawer R/Floor unit into the desired position in the vehicle's cargo area. Ensure it is centered and aligned as required.
Mako Mounting Points: Using the provided mounting brackets and the unit's base, mark the drilling locations on the vehicle's floor. Ensure no critical vehicle components (fuel lines, wiring, etc.) are beneath the drilling points.
Drill Mounting Holes: Drill pilot holes and then the appropriate size holes as indicated in the mounting hardware instructions. Deburr any sharp edges.
Chengetedza Unit: Attach the ARB R/Drawer R/Floor unit to the vehicle floor using the supplied mounting hardware. Tighten all bolts securely, but do not overtighten.
Kuongorora Kwekupedzisira: Verify that the unit is firmly secured and does not move. Check that the drawer slides smoothly and locks correctly.

ARB R/Drawer R/Floor RDRF1355 installed in a vehicle's cargo area, with a portable fridge secured on top and a spare tire carrier visible. — This image illustrates the ARB R/Drawer R/Floor RDRF1355 system installed in the rear cargo area of a vehicle. The drawer unit is securely mounted, providing a stable platform. A portable refrigerator is shown strapped down to the top of the drawer system, demonstrating how cargo can be safely transported. A vehicle's rear spare tire carrier is also visible on the left.

5. Operating Instructions

Kuvhura Dhora: Locate the latch or handle on the front of the drawer. Engage the release mechanism and pull the drawer outwards until it fully extends.
Kuvhara Dhora: Push the drawer firmly inwards until it is fully retracted and the latch engages, securing it in the closed position. Ensure it is properly latched before driving.
Kukiya Mechanism: If your unit includes a lock, use the provided key to secure the drawer in the closed position. This helps prevent unauthorized access and accidental opening.
Cargo Loading: Distribute weight evenly within the drawer and on the roller floor. Always secure items using tie-down points or cargo barriers to prevent movement during transit.
Weight Capacity: Adhere strictly to the specified weight limits for both the drawer and the top roller floor to prevent damage to the unit or vehicle.

6. Kuchengeta

Regular maintenance will ensure the smooth operation and longevity of your ARB R/Drawer R/Floor system.

Kuchenesa: Clean the drawer interior and exterior with a mild detergent and water. Avoid abrasive cleaners. Wipe down the roller slides to remove dirt and debris.
Lubrication: Periodically apply a silicone-based lubricant to the drawer runners and moving parts to ensure smooth operation. Do not use oil-based lubricants as they can attract dirt.
Kuongorora: Regularly check all mounting bolts and fasteners for tightness. Inspect the drawer slides, latch mechanism, and overall structure for any signs of wear, damage, or corrosion.
Kukuvadza: If any damage is observed, discontinue use and contact ARB support or a qualified technician for repair.

7. Kugadzirisa matambudziko

Dambudziko	Zvinogona Kukonzera	Solution
Drawer is difficult to open or close	Dirt/debris in runners, lack of lubrication, overloaded drawer, bent runner.	Clean runners, apply silicone lubricant, reduce load, inspect for damage.
Drawer does not latch securely	Obstruction, misaligned latch, damaged latch mechanism.	Clear obstruction, check alignment, inspect latch for damage.
Unit feels loose or rattles	Loose mounting bolts, unsecured cargo.	Tighten all mounting bolts, ensure all cargo is secured.

8. Zvinotsanangurwa

Model Number: RDRF1355
Brand: ARB
Mugadziri: ARB
Chinhu Weight: 121 pounds (inenge)
Zviyero zveChigadzirwa (Zvekunze): 55.51 x 21.65 x 14.57 inches (Kureba x Kufara x Kureba)
Internal Drawer Dimensions (Approximate): 49 x 17 x 10 inches (Kureba x Kufara x Kureba)
Material: Durable construction for off-road use

9. Warranty uye Tsigiro

For warranty information, technical support, or to purchase replacement parts, please contact your authorized ARB dealer or visit the official ARB website. Chengetedza humbowo hwako hwekutenga kune warranty claim.

	Mirayiridzo yeARB Summit Combar Fitting yeToyota Tacoma 2016 Gwaro rakakwana rekuisa ARB Summit Combar bull bar paToyota Tacoma yegore ra2016. Rinosanganisira matanho akadzama, runyorwa rwezvikamu, maturusi anodiwa, matanho ekuchengetedza, uye mazano ekugadzirisa.
	Mirayiridzo yeARB Recovery Point Fitting yeToyota LandCruiser Prado 150 & FJ Cruiser Detailed fitting instructions for ARB Recovery Points (Part Numbers 2821020 & 2821030) designed for Toyota LandCruiser Prado 150 and FJ Cruiser vehicles, including procedures for factory bumpers and ARB bull bars.
	Mirayiridzo yeARB Recovery Point Fitting yeToyota LandCruiser Prado 150 & FJ Cruiser Detailed fitting instructions, parts list, and care information for ARB Recovery Points (Part Numbers 2821020 LH, 2821030 RH) designed for Toyota LandCruiser Prado 150 and FJ Cruiser vehicles, compatible with factory bumpers or ARB bull bars.
	ARB RD09 Air Operated Locking Differential yeNissan H233B: Rondedzero yeZvikamu uye Magadzirirwo Rondedzero yezvikamu, magadzirirwo, uye tsananguro yedhayagiramu yakaputika yeARB RD09 Air Operated Locking Differential inoenderana nema axles eNissan H233B. Inosanganisira nhamba dzezvikamu, ruzivo rwehunyanzvi, uye ruzivo rwekuonana.
	ARB 4x4 Accessories Vehicle Application Guide - March 2016 Discover the ARB 4x4 Accessories Vehicle Application Guide (March 2016), detailing compatible recovery equipment, lighting, winches, and more for a vast array of vehicles from manufacturers like Toyota, Ford, Jeep, Nissan, and Chevrolet.
	ARB 4480010 Rock Sliders Fitting Instructions for 2021 Ford Bronco Official fitting instructions from ARB for installing the 4480010 Rock Sliders onto a 2021 Ford Bronco. Includes parts list, required tools, safety notes, and step-by-step installation guide.

ARB RDRF1355