KanexPro Adjustable Tilt Wall Mount Instruction Manual

Nhanganyaya

This manual provides comprehensive instructions for the safe and proper installation and operation of your KanexPro Adjustable Tilt Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This high-quality tilting wall mount bracket is designed for compatible televisions, offering a secure and adjustable viewing experience.

Safety Information

YAMBIRO: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Usaise chigadzirwa ichi pamadziro asina kunaka. Iva nechokwadi chekuti nzvimbo yekugadzika inogona kutsigira huremu hwakabatana hwechigadziko nechiratidziro zvakachengeteka.
• Always use a stud finder to locate wooden studs. If mounting to concrete, ensure appropriate anchors are used.
• Usapfuure huremu hwepamusoro hwe165 lbs (75 kg).
• This mount is designed for indoor use only.
• Chengeta zvikamu zviduku kure nevana.
• Always have at least two people for installation to prevent injury or damage.

Package Zviri mukati

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact KanexPro customer support.

• Kuungana kwePlati remadziro
• Maoko eChibvumirano cheTV (2)
• Kiti yeHardware Yokugadzika (zvikururu zvakasiyana-siyana, mawasher, maspacers, zvibatiso)
• Mirairo yekuisa (iri bhuku)

Image: The main components of the KanexPro wall mount, showing the wall plate and two vertical TV bracket arms.

Setup uye Installation

Zvishandiso Zvinodiwa (Zvisina Kubatanidzwa): Pencil, Drill, Phillips Head Screwdriver, Level, Stud Finder, Measuring Tape, Hammer (for concrete anchors).

Danho 1: Batanidza mabhureki eTV kuTV

1. Isa TV yako zvakanaka-naka panzvimbo yakapfava, yakachena kudzivirira kukuvara kwechiso.
2. Ziva maburi anokwira eVESA kuseri kweTV yako.
3. Sarudza screws, washers, uye spacers dzakakodzera kubva mu hardware kit inokodzera maburi ekukwirisa eTV yako.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. The hooks on the bracket arms should face downwards.

Danho rechitatu: Isa puratifomu yemadziro kumadziro

1. Determine the desired height for your TV. Hold the wall plate against the wall and mark the top and bottom center points.
2. Use a stud finder to locate two adjacent wooden studs. Mark the center of each stud. The wall plate is designed to span two studs.
3. Position the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
4. Mark the drill points through the holes on the wall plate.
5. Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
6. Namatira madziro uchishandisa mabhaudhi ekusiya madziro uye mawashers. Simbisa zvakasimba, asi usanyanya kusimba.

Image: Technical diagram illustrating the VESA compatibility ranges (min/max) for both horizontal and vertical dimensions, along with the overall measurements of the wall plate (32" wide x 8 7/8" high).

Danho rechitatu: Isa TV pamadziro

1. Nerubatsiro, simudza TV nokungwarira uchishandisa mabhureki akabatanidzwa.
2. Align the hooks on the TV bracket arms with the top edge of the wall plate.
3. Gently lower the TV, ensuring the hooks engage securely with the wall plate.
4. Once the TV is hanging, locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Verify that the TV is level and securely mounted.

Mufananidzo: An angled view of the KanexPro wall mount, highlighting the robust construction and the tilting mechanism on the bracket arms.

Kushanda kweTilt Feature

This wall mount features a variable downward tilt from 0° to -15°.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of each TV bracket arm.
2. Sunungura makiyi/mabhaudhi aya zvishoma.
3. Carefully tilt the bottom of your TV forward or backward to achieve the desired vieweng angle
4. Once the desired angle is set, firmly tighten the tilt adjustment knobs/bolts to secure the TV in place.

Maintenance

Kugadziriswa nguva dzose kunovimbisa kugara kwenguva refu uye kushanda kwakachengeteka kwechinhu chinosungirirwa pamadziro ako.

• Kuchenesa: Pukuta gomo nemucheka wakapfava, wakaoma. Usashandise abrasive cleaners kana solvents.
• Periodic Check: Periodically check all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
• Kukuvadza: If any part of the mount appears damaged or worn, do not use it. Contact KanexPro for replacement parts or professional assistance.

Kugadzirisa matambudziko

Zvinotsanangurwa

• Model Number: K-WALLM-14-BLK-0847
• Mounting Type: Gomo reMasvingo
• Movement Type: Tilt
• Material: Alloy Steel
• Ruvara: Black scratch resistant finish
• Maximum Weight Capacity: 165 lbs (75 kg)
• Chinhu Chinotsvedza: 0° to -15° Degrees (Variable Downward Tilt)
• Maximum Compatible TV Size: 51 inches
• Zvishandiso Zvinoenderana: Terevhizheni
• Chinhu Weight: 13 pounds (approx. 5.9 kg)

Warranty uye Support

For warranty information and customer support, please refer to the KanexPro official website or contact their customer service department directly. Please have your model number (K-WALLM-14-BLK-0847) and purchase details ready when contacting support.

Mugadziri: KanexPro