Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit Manual

1. Nhanganyaya

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, white

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. Mirayiridzo Yekuchengetedza

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of injury or damage.

Professional Installation Inokurudzirwa: Installation should ideally be performed by a qualified professional to ensure compliance with local building codes and proper functionality.
Verenga Mirairo: Verenga mirairo yose zvakanaka usati watanga kuisa.
Pfeka Dziviriro: Use appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
Ongorora Zvakaipa: Before installation, inspect the product for any signs of damage. Do not install damaged components.
Mhepo Yakakodzera: Ensure adequate ventilation during and after installation.
Gara Kusiri Kusvikirwa Nevana: Ichi chigadzirwa hachisi chekutamba nacho. Chengetedza pasingasvikirwi nevana.
Kurasa: Dispose of packaging materials responsibly and according to local regulations.

3. Package Zviri mukati

Tarisa kuti zvese zviriko zviripo uye hazvina kukuvara usati waenderera mberi nekuisa.

1 x Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Unit
Installation accessories (e.g., mounting screws, seals - may vary by kit version)
Mushandisi Chinyorwa (gwaro iri)

4. Setup & Installation

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

Sarudza Nzvimbo: Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
Gadzirira Kuvhura: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's websaiti).
Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
Secure Unit: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
Apply Seals: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
Test Mashandiro: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official website.

5. Operating Instructions

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

Kugadzirisa otomatiki: The internal sensor detects changes in ambient humidity. As humidity increases (e.g., during showering or cooking), the air inlet opens further to allow more fresh air in. As humidity decreases, it reduces the airflow.
Acoustic Performance: The "39dB" rating indicates its acoustic attenuation capabilities, designed to reduce external noise transmission while maintaining ventilation.
No User Controls: This unit operates automatically and does not typically feature manual controls for airflow adjustment. Its design is intended for passive, demand-controlled ventilation.

6. Kuchengeta

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

Kuchenesa Frequency: It is recommended to clean the air inlet at least once a year, or more frequently in dusty environments.
Nzira yekuchenesa:
1. Gently remove the front cover of the air inlet.
2. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the grille and internal components.
3. Pukuta nzvimbo dzekunze ne adamp jira. Usashandise abrasive cleaners kana solvents.
4. Ensure the humidity sensor (if visible) is free from dust and obstructions.
5. Dzorera chivharo chemberi zvakachengeteka.
Do Not Obstruct: Ensure that the air inlet is never blocked by furniture, curtains, or other objects, as this will impair its performance.
Kuongorora: Nguva nenguva ongorora chikwata kuona chero zviratidzo zvekukuvara kana kupera.

7. Kugadzirisa matambudziko

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

Dambudziko	Zvinogona Kukonzera	Solution
Mhepo isina kukwana	Air inlet or outer grille is obstructed. Dust accumulation on internal components. Humidity sensor is blocked or faulty. Incorrect installation or sealing.	Tarisa uone uye bvisa chero zvipingaidzo. Clean the air inlet as described in the Maintenance section. Ensure the humidity sensor is clear. If still faulty, contact support. Verify proper installation and sealing.
Noise Yakanyanyisa	Loose components or improper sealing. External noise sources. Air inlet operating at maximum flow due to high humidity.	Check mounting screws and seals. Identify and address external noise sources. This is normal operation. Ensure the unit is clean.
Unit Not Adjusting	Humidity sensor is dirty or damaged. Mechanical obstruction of the adjustment mechanism.	Clean the humidity sensor. If still unresponsive, the sensor may be faulty. Inspect for any physical obstructions preventing movement.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. Zvinotsanangurwa

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

Model Number: 11014085 (also AJA50015)
Brand: ALDES
Type: Hygro-Adjustable Acoustic Air Inlet Kit
Airflow Range: 6 to 45 Liters per second (L/s)
Acoustic Attenuation: 39 dB
Ruvara: Chena
Chimiro: Rectangular
Mugadziri: ALDES AERAULIQUE
Zvinosanganisirwa Zvikamu: 1 Product (Air Inlet Unit)
Mabhatiri Anodiwa: Aihwa
Product Category: Performance Part (HVAC, Ducts)
ASIN: B00DCK2EMW

9. Warranty & Tsigiro

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

Mugadziri: ALDES AERAULIQUE
Websaiti: www.aldes.com
Mabatiro evatengi: Refer to the ALDES websaiti yeruzivo rwedunhu.
Spare Parts: Information regarding spare parts availability is not provided in the product specifications. Please contact ALDES customer service for details.

	Aldes EHL L 6-44 m³/h - 39 dB - White: Acoustic Hygrometric Air Inlet Kit Detailed information on the Aldes EHL L hygrometric air inlet kit, including its technical specifications, acoustic performance, dimensions, and installation guidelines. This kit provides adjustable airflow for residential buildings, ensuring optimal air quality and acoustic comfort.
	Aldes EHL S 6-44 m³/h - 37 dB - White: Hygro-Regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow, and ceiling-directed air flow. Includes technical specifications, dimensions, and installation guidelines.
	Aldes EHL S 6-44 m³/h - 37 dB Aluminium Air Inlet - Technical Specifications Detailed technical specifications for the Aldes EHL S 6-44 m³/h - 37 dB Aluminium hygro-regulated air inlet, including features, dimensions, acoustic data, and installation guidelines.
	Aldes EHL L 6-44 m³/h - 39 dB Anthracite Hygro-Regulated Air Inlet Technical specifications and installation guide for the Aldes EHL L hygro-regulated air inlet, model 11014138, in anthracite. Features acoustic attenuation up to 42 dB and adjustable airflow from 6-44 m³/h.
	Aldes EHL S 6-44 m³/h - 37 dB - Brown Hygro-regulated Air Inlet Technical specifications and installation guide for the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a discreet design. Includes dimensions, accessories, and acoustic data.
	Aldes EHL S 6-44 m³/h - 37 dB - Anthracite: Hygro-regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a sleek design. Includes technical specifications, dimensions, and available accessories.

ALDES 11014085

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit