Bhuku reMirayiridzo yeFURUNO FUR-IF-NMEA2K2 NMEA 0183 kuenda kuNMEA 2000 Converter

1. Nhanganyaya

This manual provides essential information for the proper installation, operation, and maintenance of the FURUNO FUR-IF-NMEA2K2 NMEA 0183 to NMEA 2000 Converter. This device facilitates bidirectional data conversion between NMEA 0183 and NMEA 2000 CAN bus systems, offering selectable high-speed modes for specific data types like heading and AIS.

Ndapota verenga bhuku rino zvakakwana usati washandisa chigadzirwa kuti uone kushanda kwakachengeteka uye kwakanaka.

2. Safety Information

Always observe the following precautions to prevent injury and damage to the equipment.

Ita shuwa kuti simba radzimwa usati waiswa kana kugadzirisa.
Do not expose the unit to extreme temperatures or direct sunlight for prolonged periods.
Consult a qualified technician for any repairs beyond basic troubleshooting.
Use only specified power sources and cables.

3. Setup uye Kuiswa

The FUR-IF-NMEA2K2 converter is designed for straightforward integration into existing marine electronic systems. Proper installation is crucial for optimal performance.

3.1 Kuburitsa uye Kuongorora

Upon receiving the unit, carefully unpack it and inspect for any signs of damage. Ensure all components are present.

3.2 Nzvimbo Yekumusoro

Select a mounting location that is dry, protected from direct weather exposure, and allows for adequate ventilation. Avoid areas with high vibration or electromagnetic interference.

3.3 Wiring Connections

The converter features connections for both NMEA 0183 and NMEA 2000 networks. Refer to the diagram below for proper wiring.

FURUNO FUR-IF-NMEA2K2 NMEA Data Converter with NMEA 2000 connector and NMEA 0183 bare wires

Figure 1: FURUNO FUR-IF-NMEA2K2 NMEA Data Converter. The image displays the converter unit with a circular NMEA 2000 connector on one end and multiple color-coded bare wires for NMEA 0183 connections on the other. The main body of the converter is black with a label indicating "NMEA DATA CONVERTER", "TYPE IF-NMEA2K2", "SER.NO. 001866", and options for "NORMAL" or "HIGH SPEED (CUT ORANGE)" operation.

3.3.1 NMEA 2000 Connection

Connect the circular NMEA 2000 connector to your vessel's NMEA 2000 backbone. Ensure a secure, watertight connection.

3.3.2 NMEA 0183 Connection

The bare wires are for NMEA 0183 input and output. Refer to your NMEA 0183 device's manual for specific wiring requirements. Common connections include:

Data In (Rx): Connect to the NMEA 0183 Talker's Output (Tx).
Data Out (Tx): Connect to the NMEA 0183 Listener's Input (Rx).
Ground: Connect to the common ground of the NMEA 0183 system.

3.4 High-Speed Mode Selection

The converter supports a high-speed mode for specific data types. To enable high-speed mode (e.g., for heading and AIS data), locate the orange wire and follow the instructions on the converter's label. Typically, this involves cutting or connecting the orange wire as indicated for "HIGH SPEED (CUT ORANGE)" or "NORMAL" operation.

Cherechedza: Incorrect selection may lead to data transmission errors. Consult your system's requirements before altering this setting.

4. Operating Instructions

Once properly installed and powered, the FUR-IF-NMEA2K2 converter operates automatically, translating data between the connected NMEA 0183 and NMEA 2000 networks.

4.1 Simba On

Ensure all connections are secure. Apply power to the NMEA 2000 network. The converter will power on automatically as it draws power from the NMEA 2000 bus.

4.2 Data Flow

The converter transparently translates NMEA 0183 sentences to NMEA 2000 PGNs (Parameter Group Numbers) and vice-versa. Verify data reception on your connected NMEA 0183 and NMEA 2000 devices.

NMEA 0183 to NMEA 2000: Data from NMEA 0183 talkers connected to the converter's input will be broadcast on the NMEA 2000 network.
NMEA 2000 to NMEA 0183: Relevant NMEA 2000 PGNs will be converted into NMEA 0183 sentences and output via the converter's NMEA 0183 output wires.

5. Kuchengeta

The FUR-IF-NMEA2K2 converter is designed for minimal maintenance. Regular checks can help ensure long-term reliability.

Periodic Inspection: Annually inspect all cable connections for corrosion or damage. Ensure connections are tight.
Kuchenesa: If necessary, gently wipe the unit with a soft, damp jira. Usashandise makemikari ane hasha kana abrasive cleaners.
Zvigadziriso zveSoftware: Check the FURUNO website periodically for any firmware updates for the converter. Follow specific instructions provided with any updates.

6. Kugadzirisa matambudziko

If you experience issues with the converter, refer to the following troubleshooting guide before contacting support.

Dambudziko	Zvinogona Kukonzera	Solution
No data on NMEA 2000 network from NMEA 0183 device.	No power to converter. Incorrect NMEA 0183 wiring. NMEA 0183 device not transmitting. High-speed mode incorrect.	Verify NMEA 2000 network power. Check NMEA 0183 input wiring (Rx/Tx/Ground). Confirm NMEA 0183 device is operational. Ensure high-speed mode setting (orange wire) matches data type.
No data on NMEA 0183 device from NMEA 2000 network.	Incorrect NMEA 0183 wiring. NMEA 2000 network not transmitting relevant PGNs.	Check NMEA 0183 output wiring (Tx/Rx/Ground). Verify NMEA 2000 network is active and broadcasting required data.
Intermittent data loss.	Kusununguka kubatana. Kupindira kwemagetsi.	Ongorora uye chengetedza zvese zvinongedzo. Relocate the converter away from sources of interference if possible.

7. Zvinotsanangurwa

Feature	Detail
Model	FUR-IF-NMEA2K2
Function	NMEA 0183 to NMEA 2000 Converter (Bidirectional)
NMEA 0183 Ports	Input/Output (bare wire connections)
NMEA 2000 Port	1 (standard NMEA 2000 connector)
Magetsi	Powered via NMEA 2000 network
Yakakwira-Yekumhanya Mode	Selectable (e.g., for Heading, AIS data)
Mugadziri	FURUNO

8. Tsigiro neWarranty

For technical assistance or warranty inquiries, please contact FURUNO customer support. Refer to the official FURUNO website for the most current contact information and warranty policy details.

FURUNO Websaiti: www.furuno.com

	Furuno GP340 GNSS Receiver FAQ: Features, Compatibility, and Installation Frequently Asked Questions about the Furuno GP340 Global Navigation Satellite System (GNSS) Receiver, covering its features, compatibility with NavNet systems, installation details, and NMEA data output.
	FURUNO Operator's Manual: Marine Radar Models 1832, 1932, 1942 Iri bhuku rekushandisa rinopa ruzivo rwakadzama pamusoro pekuiswa, kushanda, kugadzirisa, uye kutsanangurwa kweFURUNO Marine Radar modhi 1832, 1932, uye 1942. Inovhara misimboti yekushanda, kudzora kwekutanga, menyu mabasa, kugadzirisa matambudziko, uye mirairo yekuchengetedza.
	FURUNO GP-90 GPS Navigator's Manual Yakakwana opareta bhuku reiyo FURUNO GP-90 GPS Navigator, inotsanangura maficha, kuseta, mashandiro, uye kugadzirisa kweakavimbika mugungwa navigation.
	FURUNO SCX-21 Satellite Compass Operator's Manual Chinyorwa cheOperator cheFURUNO SCX-21 Satellite Compass, inotsanangura kuisirwa, kushanda, marongero, uye kugadzirisa kwekufamba kwemugungwa. Inosanganisira maitiro ehunyanzvi uye kugadzirisa matambudziko.
	FURUNO Marine Radar Models 1832/1932/1942 Manual yeOperator Operator's Manual yeFURUNO Marine Radar Models 1832, 1932, uye 1942. Gwaro iri rinobata misimboti yekushanda, zvidzoreso zvekutanga, mabasa emenyu, kugadzirisa, kugadzirisa matambudziko, uye kuisirwa aya epamusoro marine navigation system.
	Furuno GP-90 GPS Navigator Installation Manual Comprehensive installation manual for the Furuno GP-90 GPS Navigator, covering equipment lists, unit mounting, wiring, initial settings, optional DGPS, and interconnection diagrams. Includes safety instructions and technical specifications.

FURUNO FUR-IF-NMEA2K2