Vimba ne ACM-1000 Wireless Built-in Switch User Manual

1. Nhanganyaya

This manual provides detailed instructions for the installation, operation, and maintenance of your Trust ACM-1000 Wireless Built-in Switch. Please read this manual carefully before installation and use to ensure safe and correct operation. Keep this manual for future reference.

The Trust ACM-1000 is designed to wirelessly control lights or other electrical devices up to 1000W. Its compact design allows for discreet installation in various locations.

2. Safety Information

YAMBIRO: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the main fuse box before performing any electrical work.

Ita shuwa kuti magetsi adzimwa usati waiswa kana kugadzirisa.
Usapfuure mutoro wepamusoro we1000W.
This device is designed for indoor use unless installed within an appropriate IP44 rated waterproof junction box for outdoor applications.
Keep the device away from moisture, extreme temperatures, and direct sunlight.
Do not attempt to repair or modify the device yourself. Contact qualified service personnel.

3. Chigadzirwa Pamusoroview

The Trust ACM-1000 is a compact wireless receiver designed to be integrated into your existing electrical system.

Trust ACM-1000 Wireless Built-in Switch, front view

Mufananidzo 1: Mberi view of the Trust ACM-1000 Wireless Built-in Switch. This image shows the compact, white casing of the switch, with visible wiring terminals at the bottom, a fuse compartment, and an indicator light. The overall design is circular with flat sides for mounting.

3.1 Zvikamu

Simba Zviteshi: For connecting live (L) and neutral (N) wires.
Zviteshi zvekubuda: For connecting the device to be controlled (IN/OUT).
Chiedza chechiratidzo: Provides feedback on pairing status and operation.
Fuse Compartment: Houses a replaceable fuse for overcurrent protection (T5A H250V).
Pairing Bhatani: Used to link the switch with Trust Smart Home transmitters.

Trust ACM-1000 Wireless Built-in Switch, wiring terminals

Mufananidzo 2: Pedyo-up view of the wiring terminals on the Trust ACM-1000. Labels for Live (L), Neutral (N), Input (IN), and Output (OUT) connections are clearly visible, indicating where electrical wires should be connected for power and load control.

Trust ACM-1000 Wireless Built-in Switch, top view with fuse

Mufananidzo 3: Top view of the Trust ACM-1000, highlighting the fuse compartment labeled "T5A H250V" and the small indicator light. This view also shows the mounting tabs on the sides of the device.

Trust ACM-1000 Wireless Built-in Switch, side view

Mufananidzo 4: Side view of the Trust ACM-1000, showing its slim profile and mounting clips. This view emphasizes the compact nature of the device, suitable for discreet installations.

4. Setup uye Kuiswa

Before starting, ensure you have all necessary tools and that the power supply is disconnected.

4.1 Wiring the ACM-1000

Bvisa Simba: Turn off the main power supply at your circuit breaker. Verify with a voltage muedzo.
Gadzirira Waya: Strip approximately 8-10mm of insulation from the Live (L), Neutral (N), and load wires (IN/OUT).
Batanidza Power Input:
- Connect the main Live wire to the terminal marked L.
- Connect the main Neutral wire to one of the terminals marked N.
Connect Load Output:
- Connect the Neutral wire of your light/device to the other terminal marked N.
- Connect the Live wire of your light/device to the terminal marked OUT.
- If using an existing switch, connect the switched Live wire from the switch to the terminal marked IN.
Secure Installation: Place the ACM-1000 in a suitable location such as a ceiling rose, junction box, or cabinet. Ensure it is securely mounted and wires are properly insulated.

Note: For outdoor use, the ACM-1000 must be installed inside an IP44-rated waterproof junction box to protect it from environmental elements.

4.2 Kubatanidza neTransmitter

The ACM-1000 needs to be paired with a Trust Smart Home transmitter (e.g., remote control, wall switch, motion sensor) to function wirelessly.

Dzosera Simba: Turn on the main power supply. The indicator light on the ACM-1000 should illuminate briefly.
Pinda Pairing Mode: Press the small pairing button on the ACM-1000 once. The indicator light will start flashing slowly.
Activate Transmitter: Within 10 seconds, press the 'ON' button (or the desired channel button) on your Trust Smart Home transmitter.
Simbiso The indicator light on the ACM-1000 will flash rapidly a few times and then turn off, indicating successful pairing.
Muedzo: Use the transmitter to switch the connected device ON and OFF.

To pair additional transmitters, repeat steps 2-4. The ACM-1000 can store up to 6 different pairing codes.

4.3 Deleting Pairing Codes

To delete a single pairing code or all stored codes:

Delete Single Code: Press the pairing button on the ACM-1000 once. When the indicator light flashes slowly, press the 'OFF' button (or the desired channel button) on the transmitter you wish to unpair. The indicator light will flash rapidly and turn off.
Delete All Codes: Press and hold the pairing button on the ACM-1000 for approximately 5 seconds until the indicator light flashes rapidly and then turns off. All stored pairing codes are now deleted.

5. Operating Instructions

Once installed and paired, the Trust ACM-1000 operates seamlessly with your Trust Smart Home transmitter.

Batidza: Press the 'ON' button on your paired transmitter. The connected device will turn on.
DZIMA: Press the 'OFF' button on your paired transmitter. The connected device will turn off.
Manual Control (if applicable): If an existing wall switch is wired to the 'IN' terminal, you can still use it for manual control.

6. Kuchengeta

Kuchenesa: Chenesa kunze kwechishandiso nejira rakapfava, rakaoma. Usashandise zvinochenesa zvinogumbura kana zvinonyungudutsa.
Fuse Replacement: If the connected device stops working and the indicator light does not illuminate, the fuse (T5A H250V) may need replacement. Always disconnect power before replacing the fuse. Use only fuses of the same type and rating.
Hapana Zvikamu Zvinoshandiswa Nemushandisi: Beyond fuse replacement, there are no user-serviceable parts inside.

7. Kugadzirisa matambudziko

Dambudziko	Zvinogona Kukonzera	Solution
Device does not respond to transmitter.	Haina kubatanidzwa zvakanaka. Transmitter battery low/dead. Kunze kwezera. Power to ACM-1000 is off.	Re-pair the ACM-1000 with the transmitter (see Section 4.2). Tsiva mabhatiri ekutepfenyurisa. Move transmitter closer to the ACM-1000. Check power supply to the ACM-1000.
Connected light/device does not turn on.	Blown fuse in ACM-1000. Wiring isiriyo. Device itself is faulty. Exceeded maximum load.	Disconnect power and replace fuse (T5A H250V). Disconnect power and check wiring connections (see Section 4.1). Test the connected device directly. Iva nechokwadi chekuti wat yakazaratage haipfuure 1000W.
Chiedza chechiratidzo hachivhenekeri.	No power to the ACM-1000. Chikamu chisina kunaka.	Check main power supply and wiring. Bata rutsigiro rwevatengi.

8. Zvinotsanangurwa

Muenzaniso: ACM-1000 (Manufacturer ID: 71015)
Brand: Vimba
Magetsi: 220-240V ~, 50Hz
Max Load: 1000W (Resistive load)
Fiyuzi: T5A H250V
Radio Frequency: 433.92 MHz
Range: Up to 30 meters indoors (environment dependent)
Dimensions: 5.3 x 6.8 x 2.5 cm
Kurema 60 g
Ruvara: Chena
Kudzivirirwa Rating: IP20 (for indoor use, requires IP44 enclosure for outdoor)

9. Warranty uye Tsigiro

Trust products are manufactured to high quality standards. In the unlikely event of a defect during the warranty period, please contact your retailer or the Trust customer support for assistance. Please retain your proof of purchase.

For the latest information, FAQs, and support, please visit the official Trust website or refer to the product page where you purchased the item.

	Trust ACM-2000 Build-in Switch User Manual Comprehensive user manual for the Trust ACM-2000 Build-in Switch, detailing installation, operation, and safety guidelines. This multi-language guide provides comprehensive instructions for smart home integration.
	Vimba ne ACM-2000 Build-In Switch User Manual User manual for the Trust ACM-2000 Build-In Switch, detailing installation, operation, and smart home integration. Learn how to control your lighting wirelessly with Trust Smart Home technology.
	Trust ACM-3500-3 3-in-1 Build-in Switch User Manual User manual for the Trust ACM-3500-3 3-in-1 build-in smart home receiver switch. Includes installation, operation, code management, and safety instructions.
	Trust ACM-3500-3 3-in-1 Build-in Switch User Manual User manual for the Trust ACM-3500-3 3-in-1 Build-in Switch, providing installation, operation, and safety instructions for wireless home automation.
	Vimba neFyda Wired Comfort Mouse User Guide Gaidhi remushandisi weTrust Fyda yakagadzika wired mbeva, inotsanangura setup, yekubatanidza, uye yakakosha mashandiro ekushandisa zvakakwana.
	Vimba neMydo Wireless Silent Click Mouse User Guide Yakakwana mushandisi gwara reVimbai Mydo Wireless Silent Click Mouse, inovhara setup, maficha, uye rutsigiro. Dzidza nzira yekubatanidza uye kushandisa mbeva yako yakanyarara kuti ishande makomputa.

Trust ACM-1000