Bixolon SRP-350IIICOSG Thermal Receipt Printer User Manual

1. Nhanganyaya

This manual provides essential instructions for the safe and efficient use of your Bixolon SRP-350IIICOSG Thermal Receipt Printer. Please read this manual thoroughly before operating the printer and retain it for future reference. This printer is designed for point-of-sale (POS) receipt printing applications.

2. Safety Information

• Magetsi: Use only the power supply provided with the printer. Using an incorrect power supply may damage the printer and void the warranty.
• Kuiswa: Place the printer on a stable, level surface. Avoid locations with excessive dust, humidity, or direct sunlight.
• Kufefetedza Ensure adequate ventilation around the printer to prevent overheating. Do not block ventilation openings.
• Liquid Contact: Keep the printer away from liquids. In case of accidental liquid spillage, immediately disconnect the power and contact qualified service personnel.
• Zvikamu Zvinofamba: Keep hands and foreign objects away from the paper cutter and other moving parts during operation.

3. Package Zviri mukati

Tarisa uone kuti zvinhu zvese zviripo mupakeji:

• Bixolon SRP-350IIICOSG Thermal Receipt Printer
• Magetsi
• Power Cord
• Pepa Rokutanga
• Mushandisi Chinyorwa (gwaro iri)

4. Setup

4.1 Kusunungura uye Kuisa

Carefully remove the printer from its packaging. Place the printer on a flat, stable surface near your computer or POS system.

4.2 Kubatanidza iyo Power Supply

1. Batanidza tambo yemagetsi kune magetsi.
2. Plug the power supply connector into the power port on the back of the printer.
3. Batanidza tambo yemagetsi mudura remagetsi rakadzika.

4.3 Connecting Data Cables

The SRP-350IIICOSG printer supports Serial and USB interfaces.

Mufananidzo 4.3.1: Kumashure view of the Bixolon SRP-350IIICOSG printer, illustrating the various connection ports including power, USB, serial, and Ethernet.

• USB Connection: Connect one end of a USB cable (Type B) to the USB port on the printer and the other end to an available USB port on your computer or POS system.
• Serial Connection: Connect one end of a serial cable (DB9) to the serial port on the printer and the other end to an available serial port on your computer or POS system.

4.4 Loading the Paper Roll

1. Open the printer cover by pushing the cover open lever.
2. Insert the new paper roll into the paper compartment with the paper feeding from the bottom.
3. Dhonza bepa diki uchipfuura nemuchina wekucheka.
4. Vhara chifukidziro cheprinta zvakasimba kusvika chadzvanya panzvimbo yacho.

Mufananidzo 4.4.1: Kumberi-kurutivi view of the Bixolon SRP-350IIICOSG printer, showing a paper roll correctly loaded and ready for printing.

4.5 Kuiswa kwemutyairi

Before using the printer, you must install the appropriate drivers on your computer or POS system. Drivers are typically available on the Bixolon official website. Follow the instructions provided with the driver package for installation.

5. Kushandisa Printer

5.1 Kubatidza/Kudzima

To power on the printer, press the power switch located on the side or back of the printer to the 'ON' position. To power off, press the switch to the 'OFF' position.

5.2 Zvinoratidza Mamiriro

The printer features LED indicators to show its current status:

• Simba re LED: Inopenya kana printa yakabatidzwa.
• Kukanganisa kwe LED: Flashes or illuminates to indicate an error condition (e.g., paper out, cover open, cutter error). Refer to the troubleshooting section for details.
• Paper LED: Illuminates when the paper roll is low or out.

5.3 Kudhinda Peji reKuedza

To print a self-test page:

1. Ensure the printer is powered off and paper is loaded.
2. Hold down the FEED button.
3. While holding the FEED button, turn on the printer.
4. Release the FEED button once the printer starts printing.

The printer will print a test page showing its current settings and status.

6. Kuchengeta

6.1 Kuchenesa Musoro Wekudhinda

Regular cleaning of the print head ensures optimal print quality and extends printer life. Clean the print head using an alcohol swab or a specialized print head cleaning pen.

1. Turn off the printer and disconnect the power cord.
2. Vhura kavha yeprinta.
3. Gently wipe the thermal elements of the print head with the cleaning tool.
4. Rega musoro wekudhinda uome zvachose usati wavhara chifukidziro uye wabatanidzazve simba.

6.2 Kutsiva Pepa Roru

When the paper roll is depleted, the paper out LED will illuminate. Follow the steps in Section 4.4 to replace the paper roll.

6.3 Cleaning the Auto Cutter

If the auto cutter experiences frequent jams or malfunctions, it may require cleaning. Use a soft brush or compressed air to remove paper dust and debris from the cutter mechanism.

7. Kugadzirisa matambudziko

Chikamu chino chinotaura nezvematambudziko akajairika aungasangana nawo neprinta yako.

8. Zvinotsanangurwa

Key technical specifications for the Bixolon SRP-350IIICOSG Thermal Receipt Printer:

9. Warranty uye Tsigiro

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Bixolon website. You can find drivers, FAQs, and contact information for customer service there.

Bixolon Official Websaiti: www.bixolon.com