1. General Safety Instructions
Gara uchiverenga nekunzwisisa yambiro dzese dzekuchengetedza, mirairo, mifananidzo, uye zvakatemwa zvakapihwa nechishandiso chemagetsi ichi. Kutadza kutevedzera mirairo yese yakanyorwa pazasi kunogona kukonzera kuvhunduka kwemagetsi, moto, uye/kana kukuvara kwakanyanya.
- Kuchengetedzwa Kwenzvimbo Yebasa: Chengeta nzvimbo yako yebasa yakachena uye ine chiedza chakanaka. Nzvimbo dzakatsvikinyidzana kana dzine rima dzinokoka tsaona. Usashandise maturusi emagetsi munzvimbo dzinoputika, sekunge paine zvinwiwa zvinobvira moto, magasi, kana huruva.
- Kuchengetedzwa Kwemagetsi: Power tool plugs dzinofanira kuenderana nekubuda. Usambofa wakagadzirisa plug neimwe nzira. Usashandise tambo zvisina kunaka. Usambofa washandisa tambo kutakura, kudhonza, kana kuburitsa tambo yemagetsi. Chengetedza tambo kure nekupisa, mafuta, micheto inopinza, kana zvikamu zvinofamba.
- Kuchengeteka Kwemunhu: Always wear eye protection, dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Kushandisa uye Kuchengeta Chishandiso: Usamanikidza mudziyo wemagetsi. Shandisa simba rekushandisa rakakodzera pakushandisa kwako. Bvisa plug kubva pamagetsi usati waita chero zvigadziriso, kushandura zvishandiso, kana kuchengetedza maturusi emagetsi.
- Kuchengetedzwa Kwakanangana Nesaha Yemichina: Ita shuwa kuti workpiece yakachengeteka clamped before cutting. Keep hands clear of the cutting area and the blade. Allow the blade to reach full speed before beginning a cut.
2. Chigadzirwa Pamusoroview uye Zvikamu
The Einhell TC-MS 2513 L Miter Saw is designed for precise and efficient cutting tasks. Familiarize yourself with its key components for safe and effective operation.
Mufananidzo 2.1: Pakazara view of the Einhell TC-MS 2513 L Miter Saw, showcasing its compact and robust design with the dust collection bag attached.
Mufananidzo 2.2: A user demonstrating the proper stance and operation of the miter saw for cutting a wooden workpiece.
Mufananidzo 2.3: Pedyo-up view of the integrated laser guide, projecting a precise line onto the workpiece for accurate cutting alignment.
Mufananidzo 2.4: The adjustable X-Tend supports, designed to provide stable support for longer workpieces during cutting operations.
Mufananidzo 2.5: Illustration of the saw head tilting mechanism, allowing for easy adjustment to achieve precise miter cuts.
Mufananidzo 2.6: A close-up of the high-quality carbide-tipped saw blade, designed for clean and powerful cuts.
Zvikamu Zvikuru:
- Swivel Plate: High-quality base with exact angle adjustment for angular cuts.
- Saw Head: Can be tilted to the left for miter cuts.
- Laser Guide: Mains-powered laser marks the cutting line for quick and precise positioning.
- Clamping Device: Robust mechanism to securely fix workpieces.
- X-Tend Supports: Adjustable supports for processing long workpieces.
- Integrated Stop: Ensures precise and repeatable cuts.
- Saw Blade: Superior quality carbide-tipped blade for clean and powerful cutting.
- Dust Collection Bag: Effective for maintaining a clean workplace by collecting sawdust.
- Kutakura Handle: For simple and safe transportation of the tool.
3. Setup
Before operating the miter saw, ensure it is properly set up and secured.
- Kusunungura uye Kuongorora: Carefully remove the saw from its packaging. Inspect all components for any damage that may have occurred during transit. Ensure all listed parts are present.
- Kuisa Saw: For stable operation, it is recommended to mount the miter saw to a workbench or a stable stand using appropriate fasteners.
- Attaching the Dust Bag: Connect the provided dust collection bag to the dust extraction port on the saw. Ensure it is securely fastened to effectively collect sawdust during operation.
- Adjusting X-Tend Supports: Extend the X-Tend supports as needed to provide adequate support for the length of your workpiece. These supports can be adjusted with one hand.
- Power Connection: Connect the saw's power cord to a suitable 230V power outlet. Ensure the power switch is in the OFF position before plugging in.
4. Operating Instructions
Follow these steps for safe and effective operation of your Einhell TC-MS 2513 L Miter Saw.
- Workpiece Placement: Place the workpiece firmly against the fence and on the saw table.
- Securing the Workpiece: Use the robust clamping device to securely fix the workpiece in place. This is crucial for preventing movement during cutting and ensuring safety.
- Setting the Cutting Angle (Miter Cut):
- Loosen the locking handle for the swivel plate.
- Rotate the swivel plate to the desired angle, indicated on the scale. The high-quality swivel plate allows for exact angle adjustment.
- Lock the swivel plate in position with one hand.
- Setting the Bevel Angle (Tilt Cut):
- To make miter cuts, the saw head can be tilted to the left.
- Adjust the tilt angle as required and secure it.
- Using the Laser Guide: Activate the mains-powered laser. The laser line will project onto your workpiece, indicating the precise cutting path. Use this guide for quick and accurate positioning.
- Kugadzira Kucheka:
- Ensure the area around the blade is clear of obstructions and your hands.
- Press the power switch to start the saw. Allow the blade to reach its full operating speed (4000 rpm) before beginning the cut.
- Slowly and steadily lower the saw blade through the workpiece. Do not force the saw.
- Once the cut is complete, release the power switch and allow the blade to stop completely before raising the saw head.
- Using the Integrated Stop: For repetitive cuts of the same length, utilize the integrated stop feature to ensure consistent and precise results.
Mufananidzo 4.1: Diagram illustrating various cutting angles and their corresponding maximum cutting capacities (e.g., 90°x90°: 130x75 mm, 45°x45°: 95x35 mm).
5. Kuchengeta
Regular maintenance ensures the longevity and optimal performance of your miter saw.
- Kuchenesa: After each use, disconnect the saw from the power supply. Clean the saw thoroughly, especially around the blade guard, table, and dust collection port, to remove sawdust and debris. The sawdust collection bag should be emptied regularly.
- Kuongorora uye Kutsiva Mabanga: Regularly inspect the carbide-tipped saw blade for sharpness and damage. A dull or damaged blade can lead to poor cuts and increased strain on the motor. Replace the blade when necessary, following the instructions in your detailed product manual for safe blade removal and installation.
- Lubrication: Periodically lubricate moving parts as recommended in the full product manual to ensure smooth operation.
- Cord Inspection: Check the power cord for any signs of damage, cuts, or fraying. Replace damaged cords immediately by a qualified professional.
6. Kugadzirisa matambudziko
Chikamu chino chinotarisa matambudziko akajairika aungasangana nawo neshawa yako yemiter.
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Saw haina kutanga | No power supply; Faulty switch; Motor overload protection activated | Check power connection; Contact service center; Allow motor to cool down |
| Kucheka kusina kururama | Dull blade; Incorrect angle setting; Workpiece not clamped zvakachengeteka | Replace blade; Re-adjust angle precisely; Secure workpiece firmly with clamping mudziyo |
| Excessive dust/chips | Bhegi reguruva rakazara kana kuti rakasungirirwa zvisina kunaka; Chivharo cheguruva chakavharwa | Empty and reattach dust bag; Clear any blockages in the dust port |
| Saw blade binds in workpiece | Workpiece not supported; Forcing the cut; Dull blade | Use X-Tend supports; Do not force, let saw do the work; Replace blade |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Einhell customer support.
7. Zvinotsanangurwa
Technical data for the Einhell TC-MS 2513 L Miter Saw:
Mufananidzo 7.1: Icon indicating a blade diameter of 250 mm and 48 teeth.
Mufananidzo 7.2: Icon representing the integrated laser guide feature.
Mufananidzo 7.3: Icon indicating a maximum cutting width of 130 mm.
Mufananidzo 7.4: Icon indicating a maximum cutting height of 75 mm.
- Muenzaniso: TC-MS 2513 L
- Model Number: 4300850
- Power Input: 1200 Watts
- Voltage: 230 Volts
- Hapana-Kutakura Speed: 4000 rpm
- Saw Blade Diameter: 250 mm
- Nhamba Yemazino: 48
- Max. Kucheka Upamhi: 120 mm (at 90°)
- Max. Kucheka Kudzika: 75 mm (at 90°)
- Zviyero (L x W x H): 73 x 66.8 x 52.5 cm
- Kurema 9.75 makirogiramu
- Cord Length: 1.4 Mamita
- Bata Material: Polypropylene
- Special Features: Depth adjustment, Laser, X-Tend supports
- Zvinosanganisirwa Zvikamu: 1 Miter Saw, 1 Saw Blade, 1 Dust Bag
8. Warranty uye Tsigiro
Einhell is committed to the quality and longevity of its products.
- Warranty Yakawedzerwa: In addition to the standard warranty, Einhell offers an extended 3-year warranty on all Einhell devices upon online registration. To activate this extended service, products must be registered on the official Einhell websaiti mukati memazuva makumi matatu ekutenga.
- Tsigiro yeVatengi: For further assistance, technical support, or spare parts, please visit the official Einhell websaiti kana kubata dhipatimendi ravo rebasa revatengi.
Mufananidzo 8.1: Badge indicating the 3-year warranty available upon online registration.
