DS18 PRO-DKH1 2-Inch Compression Driver ine Aluminum Horn Bhuku reMirayiridzo

Nhanganyaya

This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 PRO-DKH1 2-inch Compression Driver with Aluminum Horn. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Product Features

2-Inch Competition Compression Driver: Designed for high-quality audio performance, featuring a titanium diaphragm, mylar capacitor crossover, and an aluminum horn.
Peak Power Kubata: Capable of handling up to 640W maximum power and 320W program power, delivering robust audio output.
High-Quality Magnets: Equipped with a 35 oz Ferrite magnet for a wide range of tones and high-volume power handling.
Integrated Aluminum Horn: Includes a durable aluminum horn, ensuring optimal sound dispersion and aesthetic integration.
Durable Performance: Engineered for long-lasting performance without excessive power draw from your amplifier.

Zvinotsanangurwa

Model	PRO-DKH1
Type	Compression Driver
RMS Simba	600W
MAX Simba	1000W
Sensitivity	108dB
Voice Coil Size	2.03"
Impedance	8 Ohms
Frequency Response	800Hz - 18.5KHz
Dhayamita Nyaya	Titanium
Horn Material	Aluminium
Magnet Weight	35oz
Horn Dimensions	157 x 157 x 132mm (6"D x 6"W x 7.75"H)
Huro Diameter	2"
Kwose Kudzika	123mm / 4.84"
Item Weight	7 Pondo
Inosanganisirwa Zvikamu	Aluminum Horn

Setup uye Installation

Kuisa kwakaringana kwakakosha pakuita kwakaringana uye kuchengetedzeka. Zvinokurudzirwa kuti kuiswa kuitwe nemunhu ane hunyanzvi.

Mounting

Ensure the mounting surface is sturdy enough to support the weight of the compression driver (7 pounds).
Refer to the product dimensions (6"D x 6"W x 7.75"H) and throat diameter (2") to prepare the mounting hole.
Secure the compression driver using appropriate fasteners through the mounting holes on the horn.

Wiring

Connect the positive (+) terminal of the compression driver to the positive output of your amplifier.
Connect the negative (-) terminal of the compression driver to the negative output of your amplifier.
Iva nechokwadi chekuti ma connection ese akachengeteka uye anodzivirira kupisa kuti asaite ma short circuits.
It is recommended to use a high-pass filter (HPF) to protect the driver from low frequencies. A crossover that cuts frequencies below 800Hz is ideal for this unit.

Figure 1: DS18 PRO-DKH1 Compression Driver with Aluminum Horn.

DS18 PRO-DKH1 Dimensions and Frequency Response Graph

Figure 2: Technical drawing showing dimensions and a frequency response graph for the PRO-DKH1.

Operating Instruction

The DS18 PRO-DKH1 is designed to reproduce high frequencies with clarity and power. Follow these guidelines for optimal operation:

Iva nechokwadi chako amplifier is properly matched to the 8 Ohm impedance of the driver.
Avoid exceeding the recommended RMS power of 600W to prevent damage.
Use a high-pass filter (HPF) to prevent low-frequency signals from reaching the driver, which can cause distortion and damage.
Gradually increase volume levels to prevent sudden peaks that could harm the driver or your hearing.

Maintenance

Regular maintenance helps ensure the longevity and performance of your compression driver.

Kuchenesa: Use a soft, dry cloth to wipe down the horn and driver body. Avoid using harsh chemicals or abrasive materials.
Kuongorora: Nguva nenguva tarisa kubatanidza kwewaya kwese kusimba uye zviratidzo zvekusakara kana ngura.
Environment: Keep the driver in a dry environment, away from direct sunlight and extreme temperatures.

Kugadzirisa matambudziko

If you experience issues with your DS18 PRO-DKH1, refer to the following common problems and solutions:

Dambudziko	Zvinogona Kukonzera	Solution
Hapana Inzwi	Loose wiring, incorrect connections, amplifier off, damaged voice coil.	Check all wiring, ensure correct polarity, verify amplifier power, inspect voice coil for damage.
Yakakanganiswa Inzwi	Overpowering, improper crossover settings, damaged diaphragm.	Deredza amplifier gain, verify HPF settings, inspect diaphragm for tears or creases.
Low Output	Incorrect impedance matching, low amplifier power, phase issues.	Iva nechokwadi amplifier matches 8 Ohm impedance, check amplifier output, verify speaker phase.

If problems persist, contact DS18 customer support or a qualified audio technician.

Product Demonstration (Related Model)

Video 1: Demonstration of the DS18 PRO-DRNSC1.5DK Neodymium Driver. While not the exact PRO-DKH1 model, this video provides a general overview and sound test of a related DS18 compression driver.

Warranty uye Support

The DS18 PRO-DKH1 Compression Driver comes with a Yakakwana Warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website.

For technical support, service, or further inquiries, please contact DS18 customer service through their official channels. Keep your purchase receipt and product model number (PRO-DKH1) handy when contacting support.

	DS18 PRO-DKH2 Compression Driver: 2" Throat, 3" Titanium Voice Coil - Owner's Manual Official owner's manual for the DS18 PRO-DKH2 compression driver. Features detailed specifications, dimensions, frequency response graph, and technical data for this 2-inch throat, 8-ohm aluminum horn speaker component with a 3-inch titanium voice coil.
	DS18 PRO-DKH1X 2" Throat Aluminium Horn Driver - Chinyorwa cheMuridzi & Zvinotsanangurwa Yakadzama bhuku remuridzi uye zvakatemwa zveDS18 PRO-DKH1X 2-inch pahuro aluminium nyanga mutyairi ane titanium voice coil. Inosanganisira zviyero, kubata kwemagetsi, frequency mhinduro, nezvimwe.
	DS18 PRO-TWN5 3.6" High Compression Hybrid Driver/Tweeter Owner's Manual Owner's manual for the DS18 PRO-TWN5, a 3.6-inch high compression hybrid driver/tweeter with a 1.5-inch voice coil and neodymium magnet. Includes detailed specifications, dimensions, and performance data.
	DS18 PRO-TWX5 4x5.35" Super Bullet Tweeter Owner's Manual and Specifications Detailed owner's manual and technical specifications for the DS18 PRO-TWX5 4x5.35 inch Super Bullet Tweeter. This guide provides comprehensive information on dimensions, power handling (AES, Program, Peak), impedance, frequency response, motor construction (voice coil, diaphragm, magnet), and measurement data. Designed and engineered in the USA, the PRO-TWX5 is a high-performance audio component.
	DS18 PRO-TW120 1" Aluminum Super Bullet Tweeter Bhuku reMuridzi & Magadzirirwo Bhuku rekushandisa rine ruzivo rwakadzama uye hunyanzvi hweDS18 PRO-TW120 1-inch voice coil aluminum super bullet tweeter. Inosanganisira saizi, simba rekubata, frequency response, nezvimwewo.
	DS18 PRO-TWX2 Super Bullet Tweeter: Owner's Manual & Specifications Detailed owner's manual and technical specifications for the DS18 PRO-TWX2 3.78-inch Super Bullet Tweeter, featuring a 1-inch aluminum voice coil, 240W peak power, and 4 Ohm impedance. Includes dimensions and performance graph.

DS18 PRO-DKH1