Nhanganyaya
This manual provides comprehensive instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Fein KBB60 60mm Metal Core Drilling Unit. Please read this manual thoroughly before using the device to ensure proper handling and to prevent injury or damage.
The Fein KBB60 is a robust and powerful metal core drilling unit designed for professional use, featuring a 1400 Watt motor, two-speed gearbox, and a strong magnetic holding power of 11000 Newton for secure attachment to ferromagnetic materials.
Mirayiridzo Yekuchengetedza
Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves when operating the drilling unit. Ensure the workpiece is securely clamped and the magnetic base has full contact with a clean, flat, ferromagnetic surface before starting. Disconnect power before performing any maintenance or changing accessories.
- Ita shuwa kuti magetsi anoenderana nevoltage specified on the tool's nameplate.
- Chengetedza nzvimbo yebasa yakachena uye ine chiedza chakanaka. Nzvimbo dzakatsvikinyidzana kana dzine rima dzinokoka tsaona.
- Usashandise maturusi emagetsi munzvimbo dzinoputika, sekunge paine zvinwiwa zvinobvira moto, magasi, kana huruva.
- Chengetedza vana nevanoona kure paunenge uchishandisa chishandiso chemagetsi.
- Dzivisa kutanga netsaona. Ita shuwa kuti switch iri pa off-position isati yapinza.
- Shandisa chishandiso chakakodzera chekushandisa kwako. Usamanikidza chombo.
- Chengetedza maturusi nekungwarira. Chengeta maturusi ekucheka akapinza uye akachena.
- Tarisa uone kusarongeka kana kusungwa kwezvikamu zvinofamba, kuputsika kwezvikamu, uye chero mamiriro ezvinhu anogona kukanganisa kushanda kwechombo.
Package Zviri mukati
Pakuburitsa zvinhu, iva nechokwadi chekuti zvese zviri pazasi zviripo uye hazvina kukuvara:
- 1 x Fein KBB60 Metal Core Drilling Unit
- 1 x Kutakura Nyaya
- 1 x Coolant Tank
- 1 x Lashing Strap
- 1 x Swarf Hook
- 2 x Centering Pini
- 1 x Contact Guard
- 1 x Socket Head Wrench 5mm
- 1 x Takura Mubato
Figure 1: Fein KBB60 drilling unit and its complete set of accessories, including the carry case, coolant tank, lashing strap, swarf hook, centering pins, contact guard, socket head wrench, and carry handle.
Gadzirira
- Attaching the Carry Handle: Secure the extra carry handle to the designated mounting points on the unit for easier transport.
- Mounting the Coolant Tank: Attach the integrated coolant tank to the unit. Ensure it is securely fastened and fill it with appropriate cutting fluid.
- Installing the Core Drill Bit:
- Ita shuwa kuti iyo unit haina plugged.
- Insert the centering pin into the core drill bit.
- Insert the core drill bit with the centering pin into the Weldon holder.
- Tighten the set screws on the Weldon holder firmly using the provided 5mm socket head wrench to secure the drill bit.
- Kuisa iyo Unit: Place the magnetic foot on a clean, flat, ferromagnetic surface. Ensure full contact for maximum magnetic holding power (11000 Newton). Activate the magnetic base switch.
- Kubatanidza Simba: Plug the 3.8-meter power cable into a suitable power outlet.
Figure 2: The Fein KBB60 drilling unit prepared for use, showing the magnetic base, drill bit, and control handles.
Operating Instruction
- Kusarudza Speed: The unit features a mechanical 2-speed gearbox. Select the appropriate speed (330 rpm for 1st gear, 660 rpm for 2nd gear) based on the material and drill bit diameter. Lower speeds are generally for larger diameters and harder materials.
- Activating the Magnet: Ensure the magnetic base is firmly engaged with the workpiece before starting the motor. The magnetic holding power is 11000 Newton.
- Kutanga Mota: Turn on the motor using the power switch. Allow the motor to reach full speed before engaging the drill bit with the workpiece.
- Kuchera: Use the feed hand wheel to slowly lower the drill bit into the workpiece. Apply steady, even pressure. The feed hand wheel can be moved from one side to the other for user convenience.
- Kuyerera Kunotonhorera: Ensure the coolant system is active and providing sufficient lubrication and cooling to the drill bit during operation, especially for deep holes or hard materials.
- Monitoring Drilling Depth: The extra-long drill shaft allows for a cutting depth of up to 75mm. Monitor the depth to avoid over-drilling.
- Kumisa Kushanda: Once the drilling is complete, retract the drill bit from the workpiece using the feed hand wheel, then turn off the motor. Finally, deactivate the magnetic base.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Fein KBB60 drilling unit.
- Kuchenesa: After each use, clean the unit, especially the magnetic base and the drill bit holder, to remove metal chips and dust. Use the provided swarf hook to clear debris.
- Inotonhorera System: Regularly check the coolant tank for fluid level and refill as needed. Clean the coolant lines and nozzles to prevent blockages.
- Magnetic base: Keep the magnetic foot clean and free of debris to ensure maximum holding power. Any foreign material can reduce the magnetic force.
- Cables uye Connections: Inspect the power cable and all connections for signs of wear, cuts, or damage. Replace damaged cables immediately. The motor wiring is concealed for protection.
- Drill Bit Holder: Ensure the Weldon holder is clean and the set screws are in good condition. Replace if worn or damaged.
- Kuchengeta: Store the unit in its carry case in a dry, secure location when not in use.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Unit haibatike. | No power supply; faulty cable; internal electrical issue. | Check power outlet and cable connection. Inspect cable for damage. If problem persists, contact service. |
| Magnetic base not holding securely. | Dirty or uneven workpiece surface; non-ferromagnetic material; insufficient material thickness. | Clean the workpiece surface. Ensure it's ferromagnetic and thick enough. Check magnetic base for damage. |
| Drill bit not cutting efficiently or overheating. | Dull drill bit; insufficient coolant; incorrect speed setting; excessive feed pressure. | Replace or sharpen drill bit. Check coolant level and flow. Adjust speed and feed pressure. |
| Kudedera kwakanyanya kana ruzha. | Loose drill bit; worn bearings; damaged motor. | Ensure drill bit is securely tightened. If noise persists, contact qualified service personnel. |
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model | KBB 60 |
| Input Power | 1400 Watts |
| Output Power | 770 Watts |
| 1st Gear Speed | 330 rpm |
| 2nd Gear Speed | 660 rpm |
| Max. Carbide Core Drill Diameter | 60 mm |
| Max. HSS Core Drill Diameter | 60 mm |
| Max. Core Drill Drilling Depth | 75 mm |
| Core Drill Holder | Weldon |
| Stroke | 92 mm |
| Magnetic Holding Power | 11000 Newtons |
| Cable Length | 3.8 mita |
| Kurema | 23.9 kg |
| Magnetic Foot Dimensions | 191 x 102 mm |
| Simba Source | Corded |
| Material | Metal |
Warranty
The Fein KBB60 60mm Metal Core Drilling Unit comes with a 6-mwedzi waranti on the product from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your purchase receipt as proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, neglect, unauthorized repairs, or normal wear and tear.
Mutengi Support
For technical assistance, spare parts, or warranty claims, please contact your authorized Fein dealer or the manufacturer's customer service. When contacting support, please have your product model number (KBB 60) and serial number (if applicable) ready.
For more information, you may visit the official Fein webbvunza mutengesi wemunharaunda yako.
