Lepro 12V LED Strip Light User Manual

1. Chigadzirwa Pamusoroview

The Lepro 12V LED Strip Light provides flexible, warm white illumination for various indoor applications. This non-waterproof strip features SMD 2835 LEDs, offering high brightness and low power consumption. It is designed for easy installation with a self-adhesive backing and can be cut and reconnected to fit specific lengths.

Package Zviri mukati

2 x Lepro 12V LED Strip Lights (32.8 ft each)
User Manual

Note: A 12V power adapter is not included and must be purchased separately.

Lepro LED Strip Light package contents including two reels of LED strips and a user manual.

Image 1.1: Contents of the Lepro LED Strip Light package, showing two reels of LED strips and the instruction manual.

2. Mirayiridzo Yekuchengetedza

Ndapota verengai uye nzwisisai mirairo yese yekuchengetedza musati maisa uye mashandisa. Kukundikana kutevedzera mirairo iyi kunogona kukonzera kuvhunduka kwemagetsi, moto, kana dzimwe njodzi.

Magetsi: Only use a 12V DC power adapter. Do not use power adapters higher than 12V, as this will damage the LED strip and pose a safety risk. Ensure the total wattage of the LED strip lights does not exceed the maximum wattage of your power adapter.
Indoor Use Chete: This product is non-waterproof and designed for indoor use only. Avoid exposure to water, moisture, or high humidity.
Installation Surface: Ensure the installation surface is clean, dry, and smooth to ensure proper adhesion.
Kucheka: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the circuit and render that section unusable.
Kupisa: While LED strips generate minimal heat, ensure proper ventilation around the installed strip. Do not cover the strip with materials that could trap heat.
Vana: Bhuku rekushandatage is 12V DC, making it safe to touch. However, keep small components and packaging materials away from children.

3. Setup uye Kuiswa

3.1 Usati waiswa

Ronga Mamiriro ako: Determine the desired path for your LED strip. Measure the length required.
Chenesa Nzvimbo: Thoroughly clean the installation surface with a dry cloth to remove dust, dirt, or oil. A clean surface ensures optimal adhesion of the self-adhesive backing.
Test the Strip: Before permanent installation, connect the LED strip to a 12V power adapter to ensure it functions correctly.

3.2 Connecting the Strip Light

The LED strip requires a 12V DC power adapter (not included) for operation. Ensure the power adapter's connector matches the strip's connector.

Locate the DC input connector on the LED strip.
Connect the output plug of your 12V DC power adapter to the strip's input connector. Ensure a secure connection.
Batanidza dhiraivha yemagetsi mune yakajairwa madziro yekubuda.

Diagram showing how to connect the 12V LED strip light to a power adapter.

Image 3.1: Connection diagram illustrating how to connect the LED strip to a 12V power supply. The power adapter is sold separately.

3.3 Mounting the Strip Light

The LED strip features a self-adhesive backing for easy mounting. If you need to adjust the length, the strip can be cut at specific points.

Prepare for Adhesion: Peel off a small section of the protective film from the self-adhesive backing at one end of the strip.
Shandisa Strip: Carefully press the exposed adhesive section onto your cleaned surface. Gradually peel off more of the protective film while pressing the strip firmly along your desired path.
Kucheka (kana zvichidiwa): If the strip is too long, locate the designated cut marks, typically indicated by a copper pad and a scissor icon. Use sharp scissors to cut precisely along this line. The strip can be cut every 3 LEDs (approximately 2 inches).
Reconnection (optional): If you cut the strip and wish to reconnect sections or connect to other accessories, 2-pin 8mm connectors (not included) are required.

Three images demonstrating the installation process: cleaning the surface, peeling the adhesive, and cutting the LED strip at marked intervals.

Image 3.2: Step-by-step installation guide showing surface preparation, adhesive application, and how to cut the LED strip at designated marks.

4. Operating Instructions

Operating the Lepro 12V LED Strip Light is straightforward once installed:

Batidza/Kudzima: Connect the 12V DC power adapter to a power outlet to turn the lights on. Disconnect or use a switch on your power adapter (if available) to turn them off.
Kupenya: This specific model of LED strip light is isingadzimike. It operates at a fixed brightness when powered on.

5. Kuchengeta uye Kuchengetedza

Proper care ensures the longevity and performance of your LED strip lights:

Kuchenesa: If cleaning is necessary, ensure the power is disconnected. Gently wipe the strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Kuchengeta: If removing the strip for storage, carefully peel it off the surface. Roll it loosely back onto its original reel or a similar spool to prevent kinking or damage. Store in a cool, dry place.
Dzivisa Kupeta Zvakapinza: Do not bend the LED strip at sharp angles, as this can damage the internal circuitry.

6. Kugadzirisa matambudziko

If you encounter issues with your Lepro LED Strip Light, refer to the following table for common problems and solutions:

Dambudziko	Zvinogona Kukonzera	Solution
LED strip haina kuvhenekera.	No power to the adapter. Lose connection. Yakatadza gadziriso yemagetsi. Zvisizvo voltage power adapter. Chidimbu che LED chakakuvara.	Tarisa uone kana magetsi ari kushanda. Ita shuwa kuti zvese zvinongedzo zvakachengeteka. Test the power adapter with another device if possible. Verify the power adapter is 12V DC. Inspect the strip for visible damage, especially at cut points or bends.
Part of the LED strip is not lighting up.	Damage to a section of the strip. Kuchekwa kusina kunaka.	Inspect the non-working section for physical damage or a faulty connection if it was cut and reconnected. Ensure cuts were made precisely on the designated cut marks.
Namatira haisi kunamira.	Surface is not clean or smooth. Adhesive has lost its tackiness.	Ensure the surface is thoroughly cleaned and dry before application. For persistent issues, consider using additional mounting clips or a stronger adhesive (e.g., hot glue, ensuring it does not damage the strip).

7. Zvigadzirwa zveChigadzirwa

Feature	Tsanangudzo
Brand	Lepro
Model Number	N4100057-WW-2
Chiedza Rudzi	Warm White
Rudzi Tembiricha	3000 Kelvin
Chiedza Chinyorwa Type	LED (SMD 2835)
Nhamba ye LEDs	300 per 32.8 ft strip (600 total for 2-pack)
Urefu	32.8 ft (per strip)
Voltage	12 Volts DC
Wattage	18 watts (per strip)
Kupenya	92 lm/ft (1200 Lumens total per strip)
Special Feature	Kwete kudzima
Indoor / Outdoor Kushandiswa	Indoor Use Chete
Material	Mhangura, Plastiki
Mounting Type	Kuzvinamira
Cuttable	Every 3 LEDs (approx. 2 inches)
Item Weight	3.53 ounces (100 magiramu)

8. Warranty uye Customer Support

Lepro products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the documentation included with your purchase or visit the official Lepro website. If you have any questions, require technical assistance, or need to report an issue, please contact Lepro customer support through their official channels.

You can often find support contact information on the product packaging or by visiting the Lepro brand store on Amazon: Lepro Amazon Store.

	Gwaro reVashandisi veLepro LED Ceiling Light: Kuisa uye Magadzirirwo Gwaro rekushandisa rakadzama reLepro LED Ceiling Lights, kusanganisira marongero emhando, mirairo yekuisirwa, ruzivo rwekuchengetedza, uye saizi dzePR1500024 nePR1500035 series.
	Gwaro reVashandisi veLepro LED Ceiling Light uye Mirayiridzo yekuisa Gwaro rekushandisa rakazara reLepro LED Ceiling Lights, kusanganisira mirairo yekuisira, matanho ekuchengetedza, marongero emhando, uye runyorwa rwekurongedza kwemamodheru PR150003, PR150004, uye PR150005.
	Bhuku reMushandisi weLepro LED Light Strip uye Magadzirirwo Bhuku rekushandisa reLepro LED Light Strips (Model PR4100067 series). Rinosanganisira ruzivo rwekuisa, kuchengetedzeka, magadzirirwo, uye kuraswa kwemidziyo.
	Musoro weLepro LEDamp Bhuku reMushandisi uye Chengetedzo Gwaro Bhuku rekushandisa rakazara reLepro LED Headlamp (Model 3200008 series), kusanganisira zvinhu, mirairo yekushandisa, matanho ekuchengetedza, uye ruzivo rwekuonana.
	Bhuku rekushandisa reLepro S1 Smart LED Strip Lights Bhuku rekushandisa rakakwana reLepro S1 Smart LED Strip Lights (Model: 2A3MAS1), rinotsanangura zvese zvinodiwa pakuiswa, mashandiro, uye mashandisirwo azvo.
	Lepro S1 Smart LED Strip Light: Kuisa, Zvinhu, uye Gwaro Rekuchengetedza Gwaro rakakwana reLepro S1 Smart LED Strip Light, rinosanganisira kuiswa, kubatana kweapp, kubatanidzwa kwekudzora izwi, matanho ekuchengetedza, hunyanzvi, uye ruzivo rwewarandi.

Lepro N4100057-WW-2