1. Chigadzirwa Pamusoroview
The Legrand On-Q WP3404WH10 is a 4-port single gang keystone wall plate designed to support up to four keystone inserts. This white, screw-in plastic wall plate is suitable for various low-voltage applications, including data, voice, audio, and video connections. It is constructed from high-impact flame-retardant plastic, ensuring durability and safety. The design features a matte finish and is slightly larger than standard wall plates to help cover minor drywall imperfections.
- Kuenderana: Supports most keystone insert combinations.
- Material: High-impact flame-retardant plastic.
- Pedzisa: Matte white.
- Dimensions: Approximately 4.69 inches (H) x 2.94 inches (W).
- Zvitupa: RoHS Compliant, UL Listed (ANSI/UL 1863).
Mufananidzo 1: Mberi view of the Legrand On-Q 4-Port Keystone Wall Plate. This image shows the white plastic wall plate with four square openings for keystone inserts and two screw holes for mounting.
2. Installation Instructions
This section outlines the steps for installing the Legrand On-Q 4-Port Keystone Wall Plate. Ensure all power is off before beginning any electrical work.
2.1 Zvishandiso Zvinodiwa uye Zvishandiso
- Screwdriver (Phillips musoro unokurudzirwa)
- Yakaderera voltage mounting bracket or single gang wall box
- Keystone inserts (e.g., RJ45, HDMI, Coaxial)
- Associated cabling
2.2 Nhanho-ne-Nhanho Kuisa
- Gadzirira Kuvhurwa Kwemadziro: Ensure a standard single gang wall box or low voltage mounting bracket is properly installed in the wall.
- Install Keystone Inserts: Before mounting the wall plate, snap the desired keystone inserts into the four openings on the wall plate. Ensure they are oriented correctly (not upside down) to avoid difficulty in seating them fully. Apply firm, even pressure until each keystone clicks securely into place.
- Batanidza Cabling: Connect the appropriate cables to the rear of each keystone insert.
- Isa Purati Yemadziro: Align the wall plate with the mounting holes of the wall box or bracket. Secure the plate using the provided screws. Do not overtighten.
- Edzai Mabatanidza: Once installed, test all connections to ensure proper functionality.
Figure 2: Installation in progress. A screwdriver is used to secure the wall plate to the wall, with keystone jacks already inserted.
Figure 3: A network cable connected to one of the installed keystone jacks on the wall plate, demonstrating usage.
3. Kushanda
The Legrand On-Q 4-Port Keystone Wall Plate functions as a passive interface for your keystone-compatible connections. Once installed and populated with keystone inserts, its operation involves simply plugging in the corresponding cables (e.g., Ethernet, HDMI, coaxial) into the front of the keystone jacks.
- Kubatanidza Midziyo: Insert the appropriate cable connector into the front port of the keystone jack until it clicks into place.
- Dimbura Midziyo: To remove a cable, gently press the release tab (if present on the connector) and pull the cable straight out. Avoid pulling on the cable itself without releasing the tab to prevent damage to the keystone jack or cable.
4. Kuchengeta
The Legrand On-Q Keystone Wall Plate requires minimal maintenance to ensure its longevity and appearance.
- Kuchenesa: Shandisa yakapfava, yakaoma, kana zvishoma damp cloth to wipe the surface of the wall plate. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Kuongorora: Periodically check the wall plate and keystone inserts for any signs of damage or loose connections. Ensure mounting screws remain snug.
5. Kugadzirisa matambudziko
This section addresses common issues that may arise during installation or use.
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Keystone insert does not snap into place easily. |
|
|
| Cables do not connect securely to keystone jacks. |
|
|
| Wall plate appears loose after installation. |
|
|
6. Zvinotsanangurwa
| Attribute | Detail |
|---|---|
| Model Number | WP3404WH10 |
| Brand | On-Q (Legrand) |
| Nhamba yePorts | 4 Keystone openings |
| Gang Type | Single Gang |
| Color | Chena |
| Material | High Impact Flame Retardant Plastic |
| Mounting Type | Screw-In (for Single Gang Wall Box or LV Bracket) |
| Product Dimensions (H x W) | 4.69" x 2.94" |
| Finish Type | Plastic, Matte |
| Certifications | UL Listed (ANSI/UL 1863), RoHS Compliant |
| Item Weight | 8 ounces |
| UPC | 804428121497 |
Figure 4: Diagram showing the approximate dimensions of the wall plate: 4.69 inches in height and 2.94 inches in width.
7. Warranty uye Tsigiro
For specific warranty information regarding your Legrand On-Q WP3404WH10 wall plate, please refer to the documentation included with your purchase or visit the official Legrand On-Q website. General product support and technical assistance can also be found through the manufacturer's resources.
Mugadziri: Legrand On-Q
Websaiti: www.legrand.us/onq (This is a general link, specific support pages may vary)
