Nhanganyaya
The Ikan iLED-MS Micro Spot On-Camera Light is a compact, lightweight, and daylight-balanced LED lighting solution designed for on-camera use or as a versatile accent light. Its integrated lens system provides a focused 30-degree beam, making it suitable for various lighting applications. This manual provides essential information for the proper setup, operation, and maintenance of your iLED-MS Micro Spot light.
Zvinokosha:
- Chiedza Ergonomic Dhizaini: Easy to handle and mount.
- 30-Degree Beam angle: Provides a focused and directional light output.
- Kubuda Kunogona Kudzikiswa: Adjustable brightness from 10% to 100%.
- Yemukati Rechargeable Battery: Offers 90 to 120 minutes of operation.
- Micro USB Kuchaja: Convenient recharging via a standard 5V micro-USB cable.
- Kuiswa kwakasiyana-siyana: Features a shoe mount and a 1/4-20 thread receiver.
Gadzirira
1. Kuchaja Bhatiri
Before initial use, fully charge the internal lithium-ion battery. Connect the provided micro-USB cable to the micro-USB port on the light and plug the other end into a 5V USB power source (e.g., computer, USB wall adapter). The charge indicator light will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 2 hours.
Figure 1: Micro-USB charging port and power button.
2. Kukwidza Chiedza
The iLED-MS offers two primary mounting options:
- Camera Shoe Mount: Slide the integrated shoe mount onto your camera's hot shoe or cold shoe accessory mount. Tighten the locking wheel to secure the light in place.
- 1/4-20 Thread: For alternative mounting, the shoe mount features a 1/4-20 thread receiver at its base. This allows you to attach the light to various camera arms, light stands, or other accessories with a 1/4-20 screw.
Figure 2: Shoe mount with 1/4-20 thread receiver.
Figure 3: Ikan iLED-MS Micro Spot light mounted on a camera.
Operating Instruction
1. Simba On / Off
Locate the discrete on/off switch on the side of the light. Slide the switch to the 'On' position to power on the light and to the 'Off' position to power it off.
2. Adjusting Brightness (Dimming)
The iLED-MS features an integrated thumb wheel on the side for dimming. Rotate the thumb wheel to adjust the light output from 10% to 100% brightness.
Figure 4: Dimming thumb wheel and charge indicator.
3. Using Barn Doors and Filters
The iLED-MS comes equipped with barn doors and includes a diffuser and a warm filter. These accessories can be used to shape the light, soften its output, or adjust its color temperature.
- Barn Doors: Adjust the four individual barn door leaves to control the spread and direction of the light beam.
- Diffuser: Insert the diffuser panel into the accessory slots to soften the light and reduce harsh shadows.
- Warm Filter: Insert the warm filter into the accessory slots to change the color temperature of the light, providing a warmer tone.
Mufananidzo 5: Mberi view with barn doors and filters.
Figure 6: LED emitter and accessory slots.
4. Chigadzirwa Pamusoroview Vhidhiyo
Zvekuona pamusoroview of the Ikan iLED-MS Micro Spot light and its features, please watch the official product video below.
Video 1: Official Ikan iLED-MS Micro Spot Product Overview. This video demonstrates the physical features and basic operation of the light.
Maintenance
1. Kuchenesa
Kuchenesa chiedza, shandisa jira rakapfava, rakaoma. Kana wakaita tsvina yakaoma, bvisa jira rakapfava zvishomaamp cloth can be used, followed by immediate drying. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or internal components.
2. Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Recharge the light regularly, especially if it has not been used for an extended period. Store the light in a cool, dry place when not in use.
Kugadzirisa matambudziko
- Chiedza hachibatiki:
- Ensure the battery is charged. Connect the light to a USB power source.
- Verify the on/off switch is in the 'On' position.
- Light does not dim:
- Check that the thumb wheel is being rotated correctly.
- Ensure the light is powered on.
- Chiedza hachibhadharisi:
- Confirm the micro-USB cable is securely connected to both the light and the power source.
- Try a different micro-USB cable or power source to rule out faulty accessories.
- Ensure the power source is providing 5V output.
- Light output is inconsistent or flickers:
- Recharge the battery fully. Low battery can sometimes cause inconsistent performance.
- Kana nyaya ikaramba iripo, bata rutsigiro rwevatengi.
Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Model Number | iLED-MS |
| Product Dimensions | 5 x 5 x 5 inches |
| Item Weight | 4 ounces |
| Beam Angle | 30 madhigirii |
| Dimming Range | 10% - 100% |
| Bhatiri Type | Mukati Lithium-Ion |
| Hupenyu hwebhatiri | 90 - 120 minutes (approx. 2 hours) |
| Kuchaja Interface | Micro USB (5V) |
| Mounting Options | Shoe Mount, 1/4-20 Thread |
| Mugadziri | Ikan |
Warranty Information
Ikan products are designed for reliability and performance. For specific warranty terms and conditions applicable to your iLED-MS Micro Spot On-Camera Light, please refer to the warranty card included with your purchase or visit the official Ikan website. Chengetedza humbowo hwako hwekutenga kune chero vimbiso yewaranti.
Mutengi Support
If you have any questions, require technical assistance, or need to report an issue with your Ikan iLED-MS Micro Spot On-Camera Light, please contact Ikan customer support. Contact information can typically be found on the official Ikan websaiti kana pane chigadzirwa kurongedza.
Websaiti: www.ikancorp.com
