Hubbell 5874-5S Bell Cover and GFCI Receptacle Weatherproof Box Instruction Manual

1. Chigadzirwa Pamusoroview

The BELL 5874-5S is a 1-gang complete flip cover kit designed for outdoor electrical installations. It includes a self-test GFCI (Ground Fault Circuit Interrupter) receptacle, a weatherproof box, and a flip cover, all in a gray finish. This unit provides enhanced safety by protecting against electrical shocks in wet or damp nzvimbo.

Zvinokosha:

• Self-test GFCI for continuous safety monitoring.
• Rugged die-cast construction for durability.
• State-of-the-art powder coat finish for maximum weatherability and scratch resistance.
• Self-closing lids ensure weatherproof protection when the receptacle is not in use.
• Includes gasket and mounting hardware for easy installation.

Mufananidzo 1: Mberi view of the Hubbell 5874-5S Weatherproof Box with the cover open, revealing the integrated GFCI receptacle.

2. Safety Information

YAMBIRO: To avoid fire, shock, or death; turn off power at circuit breaker or fuse box and test that power is off before wiring! This device must be installed by a qualified electrician in accordance with all national and local electrical codes.

• Gara uchidzima magetsi usati waisa kana sevhisi.
• Do not use if the product appears damaged.
• Ita shuwa kuti zvese zvinongedzo zvakachengeteka uye zvakavharirwa nemazvo.
• This product is designed for outdoor use and must be installed in a location protected from direct water spray, as per local codes.
• Chirevo 65 Yambiro: Chigadzirwa ichi chingave chine makemikari anozivikanwa neHurumende yeCalifornia kuti anokonzera kenza uye kuremara kwekuzvarwa kana kumwe kukuvadza kubereka.

3. Setup uye Kuiswa

1. Gadzirira Saiti yekuisa: Ensure the electrical box or mounting surface is clean, dry, and free of debris. Turn off power at the main circuit breaker.
2. Mount the Weatherproof Box: Position the weatherproof box over the existing electrical box or mounting surface. Use the included mounting hardware to securely fasten the box. Ensure the gasket is properly seated between the box and the mounting surface to maintain a watertight seal.
3. Wire the GFCI Receptacle: Connect the electrical wires to the GFCI receptacle terminals. Refer to the wiring diagram on the GFCI unit itself. Typically, the "LINE" terminals connect to the incoming power from the circuit breaker, and the "LOAD" terminals (if used) connect to downstream receptacles or devices that also require GFCI protection. Ensure proper polarity (hot, neutral, ground).
   

   Mufananidzo 2: Kumashure view of the GFCI receptacle, indicating LINE and LOAD terminals for wiring.
4. Install the GFCI into the Box: Carefully fold the wires and insert the GFCI receptacle into the weatherproof box opening. Secure it with the provided screws.
5. Close the Flip Cover: Ensure the self-closing flip cover operates smoothly and provides a tight seal when closed.
6. Dzosera Simba: Batidza simba pane main circuit breaker.

4. Operating Instructions

The integrated GFCI receptacle is designed for user safety. It continuously monitors the electrical current and will trip (shut off power) if it detects a ground fault, preventing electrical shock.

GFCI Self-Test Function:

This GFCI features an automatic self-test function. It periodically performs an internal test to ensure it is functioning correctly. If the GFCI fails the self-test, the indicator light will turn RED, and the unit will trip, indicating it needs replacement.

Manual Test and Reset:

• TEST Bhatani: Press the "TEST" button (usually black or red) to manually trip the GFCI. This should cause the power to the receptacle to shut off.
• RESET Bhatani: After testing or if the GFCI has tripped, press the "RESET" button (usually red or white) to restore power. If the GFCI does not reset, or trips immediately, there may be a ground fault or wiring issue that needs to be addressed.

Self-Closing Lids:

The flip cover features self-closing lids that automatically close when a plug is removed. This ensures continuous weatherproof protection for the receptacle when it is not in use.

5. Kuchengeta

• Kuchenesa Nguva Dzose: Periodically clean the exterior of the weatherproof box with a damp jira. Usashandise abrasive cleaners kana solvents.
• Monthly GFCI Test: It is recommended to manually test the GFCI monthly by pressing the "TEST" button and then the "RESET" button. This verifies its proper operation.
• Ongorora Zvakaipa: Regularly inspect the box and cover for any signs of physical damage, cracks, or wear. Replace the unit if any damage is observed.

6. Kugadzirisa matambudziko

• GFCI Will Not Reset:

  Inogona Kukonzera: A ground fault exists in the circuit or connected appliance. The GFCI is faulty. Power is off to the circuit.

  Solution: Unplug all appliances from the GFCI and any downstream outlets. Try to reset. If it resets, plug appliances back in one by one to identify the faulty appliance. If it still won't reset, check the circuit breaker. If the breaker is on and no appliances are connected, the GFCI may be faulty and needs replacement. Observe the indicator light: if it's RED, replacement is necessary.

• No Power to Receptacle:

  Inogona Kukonzera: GFCI is tripped. Circuit breaker is off. Loose wiring connection.

  Solution: Press the "RESET" button on the GFCI. Check the circuit breaker in your electrical panel. Ensure all wiring connections are secure (only perform if power is off and you are qualified).

7. Zvinotsanangurwa

Figure 3: Dimensions of the GFCI receptacle component.

8. Warranty uye Tsigiro

This BELL product is manufactured by Hubbell and is designed for durability and performance. For specific warranty information or technical support, please refer to the documentation included with your purchase or visit the official BELL/Hubbell website. Chengeta risiti yako yekutenga yezvichemo zvewaranti.

For further assistance, you may contact BELL customer service through their official channels.