LightInTheBox S47457230000B

LightInTheBox Modern LED Pendant Light 3-Ring Chandelier Instruction Manual

Muenzaniso: S47457230000B

Mutengo: LightInTheBox

Nhanganyaya

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your LightInTheBox Modern LED Pendant Light 3-Ring Chandelier. Please read this manual thoroughly before installation and retain it for future reference.

Safety Information

YAMBIRO: To reduce the risk of electric shock, fire, or injury to persons, read and follow all instructions carefully.

Package Zviri mukati

Tarisa kuti zvese zviriko zviripo uye hazvina kukuvara usati watanga kuisa.

Zvinotsanangurwa

BrandLightInTheBox
Model NumberS47457230000B
ColorNhema
MaterialAluminium, Acrylic
StyleMazuvano
Chiedza Chinyorwa TypeYakabatanidzwa LED
Chiedza RudziIchena Inodziya (3000K)
Wattage75 Watts
Kupenya7650 Lumens
Voltage120 Volts
Product Dimensions24"L x 24"W x 1"H (60cm x 60cm x 2.5cm)
Net Weight3 KG (6.6 Pounds)
Kudzora NziraRemote Control
Special FeatureDimmable
Installation TypeSemi Flush Mount / Pendant Light
Gungano RinodiwaEhe

Setup uye Installation

Tevedzera matanho aya kuti uise zvakanaka. Zvinokurudzirwa kuti pave nevanhu vaviri vekuisa.

1. Gadzirira Kuiswa

2. Mount the Fixture

  1. Attach the mounting bracket to your ceiling junction box using the provided screws. Ensure the junction box can support the fixture's weight (approximately 6.6 lbs / 3 kg).
  2. Batanidza waya dzemagetsi:
    • Batanidza iyo nhema waya kubva kugadziriso kuenda kune bhurawuni (hot) wire from the ceiling.
    • Batanidza iyo chena waya kubva kugadziriso kuenda kune bhuruu (neutral) wire from the ceiling.
    • Batanidza iyo mhangura (pasi) waya kubva pachigadziriso kuenda kune girinhi (ground) wire from the ceiling.
    • Secure connections with wire nuts.
  3. Nyatsopinza waya mubhokisi rekusangana.
  4. Attach the ceiling canopy to the mounting bracket, securing it with the provided screws.
LightInTheBox Modern LED Pendant Light 3-Ring Chandelier

Figure 1: Assembled 3-Ring Chandelier

3. Adjusting Ring Height and Orientation

The three rings of the chandelier are suspended by adjustable cords, allowing for customization of their height and angle. This adjustment should ideally be done before the final mounting of the canopy to the ceiling.

  1. To adjust the length of each suspension wire, locate the small circular lip or button on the inside of the ceiling canopy where each wire is connected.
  2. Dzvanya uye ubate this button while simultaneously pushing or pulling the wire to your desired length. Release the button to lock the wire in place.
  3. Adjust each ring individually to achieve your preferred aesthetic. The rings can be positioned to overlap or spread out.
  4. Excess wire can be coiled and secured within the ceiling canopy.
Diagram showing adjustable cords for the chandelier rings with dimensions

Figure 2: Adjustable Cord Mechanism and Ring Dimensions

Close-up of the adjustable suspension wire mechanism on the chandelier

Figure 3: Detail of Suspension Wire Adjustment Point

Video 1: This video demonstrates the lighting effects and adjustable nature of the chandelier's rings, showcasing various configurations and brightness levels.

Operating Instruction

Your LightInTheBox LED Pendant Light is controlled via the included remote control.

Remote Control Mabasa

Image of the remote control for the LED chandelier

Figure 4: Remote Control for Chandelier Functions

Cherechedza: Iyo remote control inoda 2 AAA mabhatiri (asina kuisirwa).

Maintenance

Kugadzirisa matambudziko

DambudzikoZvinogona KukonzeraSolution
Chiedza hachibatidze.No power supply; loose wiring; remote control batteries dead.Check circuit breaker. Verify all wire connections. Replace remote control batteries.
Light flickers or does not dim with wall dimmer.Incompatible wall dimmer.This fixture is designed to be dimmed using its dedicated remote control. It is not compatible with standard wall dimmers. Use the remote for dimming functions.
Remote control haisi kushanda.Dead batteries; remote not paired (if applicable); obstruction.Replace AAA batteries in the remote. Ensure no obstructions between remote and fixture.
Light does not remember last settings when turned off by wall switch.Expected behavior for wall switch operation.To retain last settings, turn the light off using the remote control. Turning off via a wall switch may reset settings to a default.

Warranty uye Support

For warranty information or technical support, please contact LightInTheBox customer service. Retain your purchase receipt for warranty claims.

Kuti uwane rumwe rubatsiro, ndapota shanyira iyo LightInTheBox Store on Amazon.

Documents - LightInTheBox – S47457230000B

hapana magwaro akakodzera