Nhanganyaya
Thank you for choosing the Adcraft USSL-2D U-Star 2-Door Salad/Sandwich Refrigerated Prep Table. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new commercial refrigeration unit. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Image: Adcraft USSL-2D U-Star 2-Door Salad/Sandwich Refrigerated Prep Table, showcasing its stainless steel exterior, two doors, and top prep area with an insulated lid.
Mirayiridzo Yekuchengetedza
Gara uchitevedzera matanho ekutanga ekuchengetedza paunenge uchishandisa midziyo yemagetsi kuti uderedze njodzi yekubvira moto, kuvhunduka kwemagetsi, kana kukuvara.
- Kuchengetedzwa Kwemagetsi: Ensure the unit is connected to a properly grounded 115V/60Hz/1-ph power supply with a dedicated circuit. Do not use extension cords.
- Kuiswa: Position the unit on a level, stable surface. Allow adequate clearance around the unit for proper ventilation (minimum 6 inches from walls).
- Kubata: The unit is heavy (357 lbs). Use appropriate lifting equipment and personnel when moving or installing.
- Kuchenesa: Bvisa magetsi usati wageza. Shandisa michina yekuchenesa isina kunyorova, isingakuvadzi.
- Maintenance: Vashandi vebasa vanokwanisa chete ndivo vanofanira kugadzirisa.
- Kufefetedza Do not block air vents or condenser coils.
- Kuchengetedzwa Kwekudya: Maintain proper temperatures to ensure food safety.
Gadzirira
- Kuburitsa: Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage to the carrier immediately.
- Caster Installation: The unit comes with (4) 6-inch casters (2 locking and 2 non-locking). Attach the casters to the bottom of the unit, ensuring the locking casters are positioned at the front for stability.
- Kuiswa: Move the unit to its desired location. Ensure the floor is level and strong enough to support the unit's weight. Maintain at least 6 inches of clearance from walls and other equipment for proper airflow.
- Power Connection: Plug the unit into a dedicated 115V/60Hz/1-ph electrical outlet. The unit requires a NEMA 5-15P plug.
- Cutting Board & Food Pans: Place the 3/4-inch thick removable polyethylene cutting board on the top prep area. Insert the (12) 1/6 pans into the designated slots.
- Kutanga kwekutanga: Allow the unit to sit for at least 2 hours after moving before plugging it in to allow refrigerants to settle.
Operating Instruction
Digital Temperature Controller
The unit is equipped with a precise digital temperature controller with an LED display for easy monitoring and adjustment.
- Batidza/Kudzima: Dzvanya bhatani rekubatidza (rinowanzo nyorwa nedenderedzwa nemutsetse wakamira) kuti ubate kana kudzima mudziyo wacho.
- Kuratidza Tembiricha: The LED display shows the current internal temperature.
- Setting Temperature: Refer to the controller's specific instructions (often a "SET" button) to adjust the desired temperature. Allow several hours for the unit to reach the set temperature after initial startup or adjustment.
- Automatic Defrosting: The unit features automatic defrosting, which periodically clears ice buildup from the evaporator coil. During defrost cycles, the temperature display may temporarily rise.
Food Preparation Area
- Insulated Hinged Lid: Keep the insulated hinged lid closed when not actively preparing food to maintain optimal temperatures in the food pans and conserve energy.
- Food Pans: Utilize the provided 1/6 pans for ingredients. Ensure pans are properly seated to allow for efficient cooling.
- Cutting Board: The removable polyethylene cutting board provides a convenient and sanitary surface for food preparation.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your prep table.
- Kucheneswa Kwezuva Nezuva:
- Wipe down all stainless steel surfaces with a soft cloth and mild, non-abrasive cleaner.
- Clean the removable polyethylene cutting board thoroughly after each use.
- Clean the interior of the cabinet and shelves with a mild soap and water solution.
- Door Gasket Maintenance: Regularly inspect door gaskets for tears or damage. Clean gaskets with warm, soapy water to maintain a tight seal. Replace damaged gaskets promptly.
- Kuchenesa Koira yeCondenser (Mwedzi Nemwedzi/Kota):
The condenser coil, located at the rear, can accumulate dust and debris, reducing efficiency. Disconnect power before cleaning. Use a stiff brush or vacuum cleaner to remove dirt from the coil fins. For stubborn buildup, professional cleaning may be required.
- Drain Pan: Periodically check and clean the drain pan to prevent blockages and odors.
Kugadzirisa matambudziko
Usati wafonera rubatsiro, tarisa zvinhu zvinotevera zvinowanzo itika:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Chikwata chisiri kutonhora | Power supply issue, thermostat setting, dirty condenser coil, door left open. | Check power connection and circuit breaker. Adjust thermostat. Clean condenser coil. Ensure doors are closed properly. |
| Noise yakanyanyisa | Loose components, fan motor issue, unit not level. | Check for loose parts. Ensure unit is level. If noise persists, contact service. |
| Mvura pauriri | Clogged drain line, excessive humidity, door gasket issue. | Clear drain line. Ensure doors are sealed. Reduce humidity if possible. |
Kana matanho ekugadzirisa matambudziko akasagadzirisa dambudziko racho, taurai nenyanzvi yekubatsira ine hunyanzvi.
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model Number | USSL-2D |
| Zviyero (W x D x H) | 47-3/4" wide (approx. 52"D x 47"H overall) |
| Capacity | 12.0 ku. ft. |
| Masuo | 2 |
| Masherufu | (2) plastic coated wire shelves |
| Cutting Board | 3/4" thick removable polyethylene |
| Food Pans Included | (12) 1/6 pans |
| Refrigerant | Self-contained, rear mounted |
| Zvemagetsi | 115v/60/1-ph, 7.8 amps, 1/3 HP |
| Plug Type | NEMA 5-15P |
| Casters | (4) 6" macaster (makiyi maviri, maviri asingakiyi) |
| Zvekunze Zvinhu | 430 simbi isina tsvina |
| Interior Material | 304 simbi isina tsvina |
| Kurema | 357 Pondo |
Warranty uye Support
Adcraft products are manufactured to high standards and are designed for commercial use. For specific warranty details, please refer to the warranty card included with your product or visit the official Adcraft website. Chengeta risiti yako yekutenga yezvichemo zvewaranti.
For technical assistance, parts, or service inquiries, please contact Adcraft Customer Support. You can often find contact information on the manufacturer's websaiti kana kuburikidza nemutengesi wako ane mvumo.
Cherechedza: Sevhisi isina mvumo kana shanduko dzinogona kuita kuti garandi isashande.
